• 제목/요약/키워드: N/P fabric

검색결과 35건 처리시간 0.025초

천연염색에 관한 연구(4) - 황벽에 의한 견 염색 - (A Study on Natural Dyeing (4) - Dyeing of Silk Fabric with Amur cork tree Extract -)

  • 김혜인;엄성일;박수민
    • 한국염색가공학회지
    • /
    • 제13권5호
    • /
    • pp.32-32
    • /
    • 2001
  • Amur cork tree contains yellow natural basic dye largely used for dyeing on silk. Dyeabilities and fastnesses of the colorant on silk fabrics were investigated , According to dye concentration, pH, temperature, time of pre- and post- treatment of mordant, K/S values and fastnesses of the silk fabrics were examined. As a results, K/S values of dyed silk fabrics were increased by pre- and post-treatment with chinese gallotannin. The optimum condition of chinese gallotannin pre-treatment was 0.15% concentration, pH 4, 70℃, and 45min, and that of post-treatment was 0.05% concentration,60℃, and 30min. The wash fastness and the light fastness were enhanced to 4 grades and 2∼3 grades.

밤송이 추출액을 이용한 견과 면직물 염색 (2) (A Study on the Dyeing Properties of Silk and Cotton Fabrics with Chestnut Bur Extract(2))

  • 김애순;장재철
    • 한국염색가공학회지
    • /
    • 제13권2호
    • /
    • pp.7-7
    • /
    • 2001
  • This paper investigated the dyeability and surface color of silk and cotton fabrics dyed with chustnut bur extract. Some experiments were performed under the various dyeing conditions such as dyeing temperature, dyeing time, repetition of dyeing, dyeing pH, mordanting condition, washing fastness and light fastness with silk and cotton fabrics. The results obtained were as follows 1. △E value was increased when dyeing temperature and time was higher, value of munsell was shifted from Yellow to Yellow-Red at hither dyeing temperature and time in silk and cotton fabrics. 2. Optimal dyeing pH was increased with acidity of dyeing solution in silk and cotton fabrics, and repetition of dyeing did not change the dye-uptake. 3. When mordanting time and temperature was higher, △E value was larger in silk and cotton fabrics. Silk and cotton fabrics with Fe-premordanting treatment had best dyeability, but treatment with Sn-mordanting was worst. 4. Washing fastness and light fastness was excellent in various dyeing condition at silk fabric but cotton was without practical use.

특수기능 성섬유가 심장박동간격, 감성 및 심리적 변수에 미치는 효과 (Effects of multi-functional fabric on heart rate variabilitv. emotion and psychological variables)

  • 이명수;고경찬;문성록
    • 한국감성과학회:학술대회논문집
    • /
    • 한국감성과학회 2002년도 추계학술대회 논문집
    • /
    • pp.201-204
    • /
    • 2002
  • 심장박동간격은 최근 교감신경과 부교감신경의 안정을 알아보는 척도로 쓰이고 있다. 본 연구 목적은 심장박동변이 측정을 통하여 항균작용 및 원적외선 방사를 하는 특수기능성 직물이 인체의 자율신경계, 감성 및 심리적 변수에 미치는 효과를 알아보는 데에 있다. 총 10명의 피험자를 대상으로 하여 심장박동 간격을 조사하고 시각상사척도를 이용하여 우울, 불안, 피로 그리고 스트레스정도를 착용 전후에 각각 조사하였다. 그 결과 저주파수 적분값과 고주파수 적분값의 비가 착용 전에 비해 착용 후 통계적으로 유의한 차이가 나타났으며 (p<0.05) 우울, 불안, 피로, 스트레스의 값이 유의하게 감소하였다(p<0.05). 본 연구를 통하여 항균, 원적외선 방사를 하는 특수기능성 섬유가 감성이나 자율신경계에 영향을 준다는 것을 관찰할 수 있었다.

방사선 중합에 의한 ACF/PP-g-AN 복합섬유의 합성 및 우라늄 분리에 관한 연구 (A Study on the Synthesis of ACE/PP-g-AN Hybrid Fibers by Irradiation and Separation of Uranium)

  • 황택성;황대성;노영창
    • 폴리머
    • /
    • 제24권2호
    • /
    • pp.174-181
    • /
    • 2000
  • 방사선 전조사법을 이용하여 아크릴로니트릴을 ACF/PP 복합섬유에 그라프트 반응시켜 섬유형 ACF/PP-g-AN 공중합체를 합성하였다. 합성한 공중합체의 FT-lR 결과 2250$cm^{-1}$ / 부근에서 -C=N에 대한 피크, 3450$cm^{-1}$ / 부근에서 -OH와 -NH$_2$에 의한 피크 확인으로 그라프트 반응 및 아미드옥심화 반응을 확인할 수 있었다. 아미드옥심화된 ACF/PP-g-AN 공중합체의 우라늄 이온에 대한 흡착능의 최적시간은 8일이었으며, 최적 pH는 8이었다. 동일 조건하에서의 흡착능은 아미드옥심기의 함량이 증가할수록, 그라프트율이 116.3%일 때 최대 흡착능을 나타내었다. 또한 ACF/PP-g-AN 공중합체는 10회 이상 흡착능의 변화없이 흡탈착이 가능한 홉착제임을 알 수 있었다.

  • PDF

한복 착용에 따른 피보온의 변화 (Skin Temperature Responses of Hanbok When It Worn)

  • 송명견;신정화
    • 한국의류학회지
    • /
    • 제26권6호
    • /
    • pp.763-770
    • /
    • 2002
  • The objective of the study was to investigate skin temperature responses of Hanbok when it was worn. Two healthy females(average 21 years, 155cm and 60kg were exposed to a climatic chamber(Room Temp. $21{\pm}1^{\circ}C,\;52{\pm}2%R.H.$, 0.15m/s). During the experiment, rectal temperature, skin temperature of 9 areas, clothing microclimate, subjective sensation were measured. Chima and Jogory to be made of silk nobang(SN) or Ramie were worn for summer. Polyester(P) Chima and Jogori(R) could be wort for spring and autumn. For winter, silk Chima, Jogori(S) and Durumagi(D) were commonly worn. Rectal temperature was high in order of naked(N), R, SN, P, S, D. However Mean skin temperature was reversely high in order of D, S, SN, R, P, naked. In naked, skin temperature was high in order of head, trunk upper extremity and lower extremity. But on wearing of Hanbok, it was the highest at the chest except head regardless of kinds of clothing ensembles. Skin temperature of upper arm was secondly highest on wearing the silk ensemble and the Durumagi ensemble, but skin temperature of buttock was secondly highest on wearing the silk nobang ensemble and the ramie ensemble. Skin temperature on wearing the silk ensemble was generally higher than those on other clothing ensembles. Local and mean skin temperatures on wearing the silk ensemble and the Durumagj ensemble were generally higher than on other clothing ensembles. Heat resistance of the fabric might have affected on the local skin temperature.

아민형 PP-g-VBC의 NO3-N과 PO4-P 흡착특성 (Nitrate and Phosphate Adsorption Properties by Aminated Vinylbenzyl Chloride Grafted Polypropylene Fiber)

  • 이용재;송재준;나춘기
    • 대한환경공학회지
    • /
    • 제38권10호
    • /
    • pp.543-550
    • /
    • 2016
  • 비닐벤질클로라이드(VBC)를 PP부직포에 광그라프트 중합시키고 에칠렌디아민을 이용한 아민반응을 통해 음이온 교환기능기를 갖는 아민형 PP-g-VBC-EDA 흡착제를 제조하고, 회분식 흡착실험을 통해 음이온 영양염에 대한 흡착특성을 평가하였다. 흡착평형은 랭뮤어 흡착등온식과 잘 일치하였으며, 그로부터 계산한 단일층 최대흡착량은 $NO_3-N$이 59.9 mg/g, $PO_4-P$가 111.4 mg/g이었다. 흡착에너지는 8 kJ/mol 이상으로 이온교환이 주된 흡착메커니즘임을 나타내었다. 흡착속도는 이차흡착 속도모델식과 일치하였으며 9.8-36.7 kJ/mol의 흡착활성화에너지를 나타내어 화학적 흡착과정에 의해 지배되었음을 시사하였다. 흡착에 대한 열역학 함수 ${\Delta}G^o$, ${\Delta}H^o$${\Delta}S^o$는 음이온 영양염에 대한 PP-g-VBC-EDA의 흡착이 자발적이고 발열적으로 일어남을 나타내었다. PP-g-VBC-EDA 흡착제는 0.1 N HCl 용액을 이용한 세척과정을 통해 재생할 수 있었다.

Carbon/Phenolic 내열 복합재료의 기계적 특성 (Mechanical Properties of Carbon/Phenolic Ablative Composites)

  • 김평완;홍순형;김연철;예병한;정발
    • 한국복합재료학회:학술대회논문집
    • /
    • 한국복합재료학회 1999년도 추계학술발표대회 논문집
    • /
    • pp.160-163
    • /
    • 1999
  • The mechanical properties and failure behaviour of carbon/phenolic composites were inverstigated by tension and compression. Carbon/phenolic composites were fabricated by infiltration of matrix into 8 harness satin woven fabric of PAN-based carbon fibers. The tensile and compressive tests were performed at 25℃ under air atmosphere and, at 400℃ and 700℃ under N₂ atmosphere. The tensile strengths of carbon/phenolic composites in with-laminar/0° warp direction were about 10 times higher than those in with-laminar/45° warp direction, which was analyzed due to a change of fracture mode from fiber pull-out by shear to tensile fracture of fibers. The fracture of carbon/phenolic composites in with-laminar/45° direction was analyzed due to delamination by buckling. Tensile and compressive strength of carbon/phenolic composites decreased to about 50% at 400℃, and to about 10% at 700℃ compared to that at room temperature. The main reason for the decrease of tensile or compressive strength with increasing temperature was analyzed due to a reduction of bond strength between fibers and matrix resulting from thermal degradation of phenolic resin.

  • PDF

Non-linear aero-elastic response of a multi-layer TPS

  • Pasolini, P.;Dowell, E.H.;Rosa, S. De;Franco, F.;Savino, R.
    • Advances in aircraft and spacecraft science
    • /
    • 제4권4호
    • /
    • pp.449-465
    • /
    • 2017
  • The aim of the present work is to present a computational study of the non-linear aero-elastic behavior of a multi-layered Thermal Protection System (TPS). The severity of atmospheric re-entry conditions is due to the combination of high temperatures, high pressures and high velocities, and thus the aero-elastic behavior of flexible structures can be difficult to assess. In order to validate the specific computational model and the overall strategy for structural and aerodynamics analyses of flexible structures, the simplified TPS sample tested in the 8' High Temperature Tunnel (HTT) at NASA LaRC has been selected as a baseline for the validation of the present work. The von $K{\acute{a}}rm{\acute{a}}n^{\prime}s$ three dimensional large deflection theory for the structure and a hybrid Raleigh-Ritz-Galerkin approach, combined with the first order Piston Theory to describe the aerodynamic flow, have been used to derive the equations of motion. The paper shows that a good description of the physical behavior of the fabric is possible with the proposed approach. The model is further applied to investigate structural and aero-elastic influence of the number of the layers and the stitching pattern.

마찰과 세탁에 의한 극세섬유 직물의 표면과 촉감변화에 관한 연구 (End Use Tactile Property of the Split-type Nylon/PET Microfiber Fabrics)

  • 오경화;윤재희
    • 한국의류학회지
    • /
    • 제28권3_4호
    • /
    • pp.539-545
    • /
    • 2004
  • In this study, the effect of washing, bleaching, and abrasion on tactile and the water absorption properties of the split-type Nylon/Polyester (N/P) microfiber pile-knit was investigated under various enduse conditions. We examined the water absorption and surface properties of PET microfiber which will be very useful in the future. We also studied the variations of their performance during usage caused by friction and repeated washing, regard to all kinds of physical, chemical changes which will appear while using those textiles. Progress in further splitting of PET microfiber fabric is observed with increases in the number of washing and bleaching cycles, and treatment temperature. Initial water absorption (%) was increased with progress in splitting, which provided efficient capillary channel. Surface properties were varied with additional splitting by washing and abrasion. Formation of pilling and splitting by abrasion increase surface roughness, diminishing tactile property, and reduced water absorption property. The current results from this study is expected to provide the appropriate washing management guide to consumers, and to inform end-use performance of product to a producer for improving product quality.

E-beam 전조사에 의한 $NO_{3} ^{-}$ 선택 흡착용 아민화 PP-g-GMA 섬유 이온교환체의 합성과 그 특성에 관한 연구 (Studies on the Synthesis of Aminated PP-g-GMA Fibrous ion Exchanger by E-beam Pre-irradiation and Their Properties of Selective Adsorption for $NO_{3} ^{-}$)

  • 황택성;이선아;이면주
    • 폴리머
    • /
    • 제26권2호
    • /
    • pp.153-159
    • /
    • 2002
  • 본 연구에서는 지하수 중의 NO$_{3}^{-}$ 이온을 선택적으로 흡착 제거시키기 위하여 E-beam 전조사법에 의해 GMA 단량체를 폴리프로필렌 섬유 기재에 그라프트 반응시켜 PP-g-GMA 공중합체를 제조한 후 아민화 반응을 통하여 강염기성 APP-g-GMA 음이온교환수지를 합성하였다. 공중합체의 그라프트율 및 TMA에 의한 아민화율은 반응온도가 증가할수록 증가하였으며, $60^{\circ}C$일 때 각각 133%, 88% 최대치를 나타내었고, 이때의 팽윤율과 이온교환용량은 각각 86%, 2.5 meq/g으로 IMAC HP555, Amberlite IRA 400와 같은 상용 이온교환수지 보다 높게 나타났다. $NO_3;^-$ 이온흡착의 최적 조건은 pH 5~6이었으며, trimethylammonium 기를 갖는 -Cl형의 APP-g-GMA 이온교환체가 가장 높은 선택 흡착성을 나타냈다.