• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.557-560
• /
• 1999

The design of large area thin film transistor liquid crystal displays (TFT-LCDs) requires consideration of cross-talks between the data lines and pixel electrodes. These limits are imposed by the parasitic capacitive elements present in a pixel. The capacitive coupling of the data line signal onto the pixel causes a pixel voltage error. In this study semi-empirical capacitance model which is adopted from VLSI interconnection capacitance calculations was used to calculate mutual coupling capacitances. With calculated mutual coupling capacitances and given image pattern, the root mean square(RMS) voltage of pixel is calculated to see vertical cross-talk from the first to the last column. The information obtained from this study could be utilized to design the larger area and finer image quality panel.

• 한국지능시스템학회논문지
• /
• 제24권2호
• /
• pp.136-140
• /
• 2014

본 논문에서 우리는 자기정전용량 방식의 TSP(Touch Screen Pannel)에서 멀티터치를 인식하고 추적하는 방법에 대하여 소개한다. 자기정전용량 방식의 TSP는 패널의 가로와 세로로 배치된 ITO 투명전극필름 자체의 정정용량변화를 센싱하여 터치를 인식하는 방법으로 SNR이 좋고 센싱시간이 빠르며 터치인식 및 처리가 간단한 장점이 있으나 멀티터치 처리에 어려운 단점이 있다. 이러한 이유로 최근에는 멀티터치에 어려움이 없는 상호정전용량 방식의 TSP가 많이 사용되고 있다. 그러나 소형으로 개발되는 리모컨 패드나 최근에 개발되고 있는 착용기기에서는 제한된 멀티터치만으로 가능하므로 큰 문제가 되지 않는다. 본 논문에서는 이러한 자기정전용량 방식의 TSP에서 멀티터치를 인식할 때 발생하는 문제와 이러한 문제를 완화하는 방법 그리고 터치이동 시에 이를 추적하는 방법에 대하여 제안한다. 제안한 방법을 실험한 결과 투 터치에서 안정적으로 동작함을 확인하였다.

• 전자공학회논문지A
• /
• 제33A권7호
• /
• pp.92-98
• /
• 1996

parallel bonding wires separaated with a screeing bonding wire are proposed and characterized in order to redue mutual coupling and parasitics of high-speed and high-density device packaging. The mehtod of moments (MoM) with the incorporation of the ohmic loss has been used in a wide range of frequencies. From the calculated results, we have found that the screening bonding wire effectively reduces inductive and capacitive crostalk levels more than 3dB. the parasitic self inductance is also reduced more than 12% by the screening effect. Therefore, for a general VLSi package, the packaging density can be increased more than 30% using the screening bonding wire. This screeing bonding wire and the analysis can be effectively used to reduce crosstalk and increase packaging density of high density devices.

• 전자공학회논문지A
• /
• 제33A권6호
• /
• pp.206-219
• /
• 1996

This paper describes a data structure and evaluation algorithm to improve the perofmrances MOS logic-with-timing simulation in computation and accuracy. In order to efficiently simulate the logic and timing of driver-load networks, (1) a tree data structure to represent the mutual interconnection topology of switches and nodes in the driver-lod network, and (2) an algebraic modeling to efficiently deal with the new represetnation, (3) an evaluation algorithm to compute the linear resistive and capacitive behavior with the new modeling of driver-load networks are developed. The higher modeling presented here supports the structural and functional compatibility with the linear switch-level to simulate the logic-with-timing of digital MOS circuits at a mixed-level. This research attempts to integrate the new approach into the existing simulator RSIM, which yield a mixed-klevel logic-with-timing simulator MIXIM. The experimental results show that (1) MIXIM is a far superior to RSIM in computation speed and timing accuracy; and notably (2) th etiming simulation for driver-load netowrks produces the accuracy ranged within 17% with respect ot the analog simulator SPICE.

• Journal of Power Electronics
• /
• 제16권2호
• /
• pp.805-814
• /
• 2016

Electric-field coupled power transfer (ECPT) systems have been proposed as an alternative wireless power transfer (WPT) technology in recent years. With the use of capacitive plates as a coupling structure, ECPT systems have many advantages such as design flexibility, reduced volume of the coupling structure and metal penetration ability. In addition, wireless communications are effective solutions to improve the safety and controllability of ECPT systems. This paper proposes a power and signal shared channel for electric-field coupled power transfer systems. The shared channel includes two similar electrical circuits with a band pass filter and a signal detection resistor in each. This is designed based on the traditional current-fed push-pull topology. An analysis of the mutual interference between the power and signal transmission, the channel power and signal attenuations, and the dynamic characteristic of the signal channel are conducted to determine the values for the electrical components of the proposed shared channel. Experimental results show that the designed channel can transfer over 100W of output power and data with a data rate from 300bps to 120 kbps.

• 패션비즈니스
• /
• 제24권5호
• /
• pp.140-157
• /
• 2020

The purpose of this study is to develop three functions for smartphones and PCs using a textile touch sensor in an everyday sports jacket and to present their usefulness; to this end, we have developed a mutual capacitive textile touch sensor and corresponding structure, and we have implemented three functions into a textile touch sensor jacket, of which we also conducted a usability evaluation. The jacket has a sensor on the wrist of the left sleeve and a device on the left arm. The sensor system can be divided into three main categories: a sensor acting as a switch, a circuit connecting the sensor and the device, and the device that acts as power control and system on/off. The functions are implemented in the texture touch sensor jacket in three modes: cell phone mode, music mode, and PPT presentation mode. We conducted an evaluation of each function in each mode, which indicated that all functions performed well without errors and that the switch had excellent operation for the number and intensity of touch. In terms of usability in a humid environment, the performance of touch functions was found to be equally implemented. In the temperature environment, neither high nor low temperatures caused issues with the functions. A wearing satisfaction assessment evaluated psychological satisfaction, clothing convenience, device convenience, device usability, and device effectiveness. This research jacket is thought to be desirable for the relatively bendable, flexible, and intimate sensor used on the clothing, and the circuit made of conductive fabric tape.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권7호
• /
• pp.393-400
• /
• 2003

This paper discusses how to implement and verify a software model of the digital relay that can be added to real time digital simulator(RTDS) model library and is then subjected to the same outputs as the actual relay. The software model is stand-alone and can be used with real relays. It is also possible to conduct interactive real-time tests when the system effects of the relay action need to be investigated. The characteristics of mho type and the quadrilateral type, which is commonly used in recently developed relays, are modeled in this paper. Single circuit line and double circuit line system are used for model verification. The transmission lines are each 100 km in length and are modeled as distributed parameter lines but not frequency dependent. The transmission lines in the single circuit system are modeled as ideally transposed line. The mutual coupling data with the parallel line was taken account in the transmission lines for the double circuit system. The main CTs and PTs are included and operated in their linear region during the tests. For the purpose of testing the relay model accuracy the faults have been applied at various points on the protected line. Its accuracy is assessed against theoretical values.

• 전자공학회논문지
• /
• 제52권4호
• /
• pp.71-79
• /
• 2015

본 논문에서는 상호 정전용량 터치스크린의 single line sensing 방법에서의 단점을 해결하기 위한 성능향상 구조를 제안한다. 제안 구조는 Dual sensing 기법과 voltage shifting 기법을 도입하여 센싱 신호의 노이즈를 효과적으로 제거하고 터치 유무의 센싱 신호 차이를 증가시킨다. Dual sensing 기법은 구동신호의 양방향 엣지를 사용하여 integration 속도를 2배로 증가시켜 감지시간을 감소시킨다. Voltage shifting은 ADC의 입력신호 동작범위를 최대화하여 신호 대 노이즈비 (SNR)를 개선한다. 23" 대형 상용 터치스크린을 이용하여 simulation 및 측정한 결과로 제안된 센싱기법은 43dB의 SNR 성능을 가지며, 기존 방식 대비 2배의 스캔 속도를 제공하여 대형 터치스크린을 위한 적합한 기술임을 보인다. 제안된 센싱기법은 현재 매그나칩 CMOS 0.18um 공정으로 TSP 컨트롤러칩으로 구현되었다.

• 전자공학회논문지
• /
• 제52권4호
• /
• pp.62-70
• /
• 2015

최근 스마트폰의 발달과 더불어 대형 TV, 의료용 장비 및 전자 칠판에도 터치스크린의 수요가 급증하고 있다. 스크린 사이즈가 증가 할수록 고해상도를 위하여 훨씬 더 많은 채널이 추가 되면서 한 프레임을 스캔하는데 긴 시간이 소요되어 터치감지 지연이 큰 문제가 되고 있다. 본 논문에서는 이러한 문제를 해결하기 위하여 새로운 드라이빙 및 센싱 기법을 제안한다. 이 기법은 differential 드라이빙 방법으로 2 단계로 수행되어진다. 먼저 고속 센싱 프로세스를 통해 터치가 발생된 센싱 라인들을 우선 대략적으로 도출해 낸 후 정확한 터치 위치 스캔을 위해서 터치된 라인에서만 감지가 수행되어 진다. 이 방법을 사용하면 터치 패널의 frame refresh rate를 향상 시킬 수 있다. 제안된 구조는 FPGA와 개발된 AFE board로 구현되었으며, 23인치 상용 터치패널을 사용하여 테스트하였다. 이 기법은 기존 대비 frame scan rate를 8.4배 향상시킨다.