• Journal of Korean Society of Water and Wastewater
• /
• v.11 no.1
• /
• pp.64-73
• /
• 1997

Most of the municipal wastewater treatment plants operated in Korea are designed for high concentrations municipal sewage. However, activated sludge process employed by municipal wastewater treatment plant is operated at low organic loading. The objective of this study was to determine optimum operating condition of activated sludge process for treatment of low concentration municipal sewage. Three bench scale activated sludge reactors were operated to investigate the effect of HRT and SRT on the COD and TSS removal efficiency. The average concentration of TSS, SCOD, SBOD and TKN in influent were 118mg/l, 61mg/l, 21mg/l, and 12mg/l, respectively. The activated sludge reactors operated with various HRT and SRT showed about 89-93% TSS removal efficiency. HRT and SRT does not affect the TSS removal efficiency of actvatied sludge process significantly. However, HRT affected the SCOD removal efficiency slightly. As the HRT decreases from 13hours to 3hours, the SCOD removal efficiency decreases from 67% to 56%. The average effluent TCOD concentration of the reactor operated with 3hours of HRT was approximatly 40-45mg/l. Kinetic coefficient yield (Yt) and decay coefficients(Kd) were 0.594-0.954 mgMLVSS/mgCOD and $0.0197-0.0317day^{-1}$, respectively. Low concentration municipal sewage can be treated with 3 hours of HRT without effluent quality deterioration and SRT does not affect the substrate removal efficiency at this operation condition.

• Journal of Korean Society of Water and Wastewater
• /
• v.10 no.2
• /
• pp.117-123
• /
• 1996

A bench-scale continuous activated sludge system was operated in order to study the effects of solid waste landfill leachate on municipal wastewater treatment. The leachate sample was collected from Nanjido landfill. During the 7 weeks of operational period, the leachate content in the influent fed to the system was increased stepwise from 3% to 5% and 7%. The solids retention time was the major process control parameter, and it was 10 days. With the municipal wastewater alone, COD removal was 75%. The removal percents, however, decreased to 60% and 45% when the leachate content was 3% and 7%, respectively. For the wastewater spiked with the leachate, the sludge production was higher than for the municipal wastewater alone. Sludge settleability determined by SVI deteriorated with the increase of leachate content. The specific oxygen uptake rate, however, was measured higher as leachate content increased.

• Journal of Environmental Health Sciences
• /
• v.28 no.5
• /
• pp.1-3
• /
• 2002

This study was to evaluate on the removal efficiencies of total nitrogen and phosphorus in municipal wastewater at MUNR process using sludge carbon source for environmental micro-organism. The removal efficiencies of total suspended solid were 85.9~91％, total nitrogen were 38.6~87.2％ and total phosphorus were 30.8~39.0％, respectively. It was shown that removal efficiency of nitrogen was effectively influenced by sludge carbon source treated with ultrasonication. The removal efficiency of total phosphorus was low because the sludge was not wasted during this treatment.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.5
• /
• pp.513-520
• /
• 2007

The simulation programs used for diagnosis and design of activated sludge process require organic fractions in municipal wastewater as the input variables. However, methods for characterizing organic fractions are still under development, and are not standardized. In this study, total COD of municipal wastewater was experimentally subdivided into readily and slowly biodegradable COD as well as soluble and particulate inert COD. The COD fractionation of the three municipal wastewater for one year shows linear relationship between each COD fraction and TCOD concentration with around 100% COD balance. This result means that the COD fraction do not vary very much with time, although the actual influent concentrations vary significantly with time and day. Therefore, the experimentally subdivided COD fractions can be utilized as wastewater specific parameters for the simulation of activated sludge processes.

• Journal of Industrial Technology
• /
• v.36
• /
• pp.83-88
• /
• 2016

In this study, a series of experiment was carried to improve dewaterability of the sludge produced in a treatment plant, located in Hongcheon, Gangwondo, which has been treating municipal wastewater and livestock wastewater. Optimum sludge mixing ratio and the amount of sludge conditioner were determined. As sludge conditioners, alum and ferric salt were selected and tested. For the measurement of sludge dewaterability, capillary suction time(CST) and the specific resistance were measured, The specific resistance was detemined by running a series of Buchner Funnel Test. Mixing the two sludges at a 50:50 ratio with the addition of 20 mL alum gave the best results in terms of dewaterability. The moisture content decreased by 2% at this condition.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.9
• /
• pp.5-12
• /
• 2014

Anaerobic digestion was investigated for the stabilization of sludge, decrease of volatile solids, production of biogas for wastewater sludge. In this study, total solids and volatile solids, elemental analysis were conducted to determine characteristics of various types of sludges and investigate the feasibility of biogas production of Municipal Wastewater Sludge (MWS), Industrial Wastewater Sludge (IWS), mixed sludge (Mix), and Municipal Wastewater Sludg Cake (MWSC). Total solids, volatile solids, and C/N ratio were determined in the range of 11.2~20.6 %, 62.1~83.1 % of TS and 4.96~8.33 %. Using the biochemical methane potential (BMP test), mixed sludge and wastewater sludge finished the methane production within approximately 20 day and 16~17 day. Sludge cake finished within 10 day. Mixed sludge produced 395.5 mL $CH_4$ per g of Volatile Solid (VS) and resulted in the highest methane production. For carbon dioxide production, five sludges had similar value of accumulated carbon dioxide production except for sludge cake.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.2
• /
• pp.113-120
• /
• 2004

The biodegradability of organics has become essential for the design and modeling of a biological nutrient removal process. Respirometry for the batch test just with wastewater has been conducted to estimate active biomass and readily biodegradable organics in municipal wastewater simultaneously. Municipal wastewater contains significant active biomass, which is estimated about 17% of COD. Compared to the batch test seeded with sludge, the batch test just with wastewater represents a little higher readily biodegradable organics. This might be due to the different environment of the logarithmic growth of active biomass. The nitrate uptake rate test has been also performed for the estimation of the readily biodegradable organics. The nitrate uptake rate test results in a little higher readily biodegradable organics compared to the batch test seeded with sludge and similar organics compared to the batch test just with wastewater. This might be caused by the different sludge of a sequencing batch reactor process. Taking the result of the previous research into account, the readily biodegradable, slowly biodegradable, active biomass, soluble inert, and particulate inert organics are estimated about 11%, 49%, 17%, 11%, and 12% of COD, respectively.

• Journal of environmental and Sanitary engineering
• /
• v.23 no.3
• /
• pp.39-46
• /
• 2008

In order to study the estimate of $CH_4$ emission factors in the municipal wastewater treatment plants, the active sludge process, 5-stage process, Denipho process, and SBR process were investigated. When active sludge process, 5-stage process, and Denipho process were used in wastewater treatment plant, the $CH_4$ emission factors were 2.88, 1.61, and 0.57 g-$CH_4/kg$-BOD, respectively. On the other hand, in the case of SBR process, it was 4.14 g-$CH_4/kg$-BOD. These results indicate that SBR process was effective for $CH_4$ emission in municipal wastewater treatment plants. Using the above processes, the methane emission factor and amount of waste water sludge were $4.78m^3/t$ and $12,204,506m^3/yr$, respectively. The remove of BOD was a range of $93.91{\sim}98.63%$.

• Journal of Korean Society of Water and Wastewater
• /
• v.14 no.1
• /
• pp.62-75
• /
• 2000

Most of biological treatment to remove contaminants in municipal wastewater have been conducted by activated sludge process. But, the process have several probIems such as enormous site needed for construction of treatment facilities, unstable treatment due to limited ability to control load fluctuation, frequent sludge bulking and appearance of lots of surplus sludge. In this study, the experiments were performed through submerging biofilm of PEPP media in existing aeration tank with raw water from municipal wastewater treatment plant and then submerging PVDC and PEPP media, different from shape and chemical peculiarity in anoxic reactor. Throughout the experience, nutrient removal efficiency according to HRT, nitrogen phosphorous removal efficiency, behavior of nitrogen and dewatering efficiency have been compared and analysed with those of activated sludge process. As the results, BOD removal efficiency according to BOD volumetric load and F/M ratio was not found any differency in two processes, but was decreased below 90% as going along the condition of high load in activated sludge process. Kinetic coefficient was $K_{max}=1.162day^{-1}$, $K_s=53.77mg/L$, $Y=0.166mgVSS/mgBOD_{rem}$. and $K_d=0.019day^{-1}$. It was found that the removal efficiency, even though in aerobic condition, in biofilm process equipped anoxic reactor was higher than the one in activated sludge process within the range of 70~80%, and became better as HRT increased. Phosphorous removal efficiency was not found any differency in two processes. In biofilm process, treament efficiency even in conditions of high load was not decreased, because the biomass concentration could be maintained in high condition compared with activated sludge process. As HRT increased, suspended and attached biomass was increased and the other hand, F/M ratio was decreased as biomass' increasing. Biomass thickness was increased. from $10.43{\mu}m$ to $10.55{\mu}m$ as HRT increased and density of biomass within $40.79{\sim}41.16mg/cm^2$. The results also present that the dewatering efficiency of sludge generated in biofilm process was higher than in activated sludge process, and became better as HRT increased.

• Journal of Environmental Health Sciences
• /
• v.26 no.2
• /
• pp.30-33
• /
• 2000

The objective of this study is to examine the subsitiution effect of the waste oyster shell powder as the conditioning agent in municipal wasterwater sludge dewatering process. Beacuse the oyster shells have a large amount(about 38% by weight) of alkaline minerals, such as calcium and magnesium, they are thought to have the potential as a good conditioning agent. In this study, the physico-chemical properties of powdered oyster shells (75${\mu}{\textrm}{m}$ or 200 mesh) and the dewatering characteristics of municipal waste water sludge using powdered oyster shells and CaCO3 are investigated. The conclusions are as follows, 1. Oyster shell could produce calcium ions up to 14ppm at pH-7.0, and this represents that oyster shell is a potential properties as a good conditioner. 2. 100ml of wastewater sludges, conditioned with pretreated oyster shell, are dewatered to the level of 25% solid concentration. 3. Wasterwater sludges, conditioned with oyster shell and CaCO3 are dewatered to the level of 32% solid concentration. And this shows that two-stage combined conditioning process is desirable than the one-stage conditioning process.