• Environmental Engineering Research
• /
• 제19권3호
• /
• pp.197-203
• /
• 2014

This study estimated spatial and seasonal variation of water quality to understand characteristics of Nakdong river basin, Korea. All together 11 parameters (discharge, water temperature, dissolved oxygen, 5-day biochemical oxygen demand, chemical oxygen demand, pH, suspended solids, electrical conductivity, total nitrogen, total phosphorus, and total organic carbon) at 22 different sites for the period of 2003-2011 were analyzed using multivariate statistical techniques (cluster analysis, principal component analysis and factor analysis). Hierarchical cluster analysis grouped whole river basin into three zones, i.e., relatively less polluted (LP), medium polluted (MP) and highly polluted (HP) based on similarity of water quality characteristics. The results of factor analysis/principal component analysis explained up to 83.0%, 81.7% and 82.7% of total variance in water quality data of LP, MP, and HP zones, respectively. The rotated components of PCA obtained from factor analysis indicate that the parameters responsible for water quality variations were mainly related to discharge and total pollution loads (non-point pollution source) in LP, MP and HP areas; organic and nutrient pollution in LP and HP zones; and temperature, DO and TN in LP zone. This study demonstrates the usefulness of multivariate statistical techniques for analysis and interpretation of multi-parameter, multi-location and multi-year data sets.

• 상하수도학회지
• /
• 제29권6호
• /
• pp.625-632
• /
• 2015

The study of water environment system using a multivariate analysis in Changnyeong-Haman weir section has been conducted. The purpose of this study is to establish better understanding related water qualities in the Changnyeong-Haman weir section which can provide useful information. The data were consisted of water quality data and algae data including WT(water temperature), pH, DO, EC, COD, SS, T-N, $NH_3-N$, T-P, $PO_4-P$, Chl-a, TOC, d-silica, t-silica, Cyanobacteria, Diatoms, and Green algae. Statistical analyses used in this study were correlation analysis, principal components, and factor analysis. According to correlation analysis on COD and TOC, it revealed that the each value of correlation coefficient was 0.843. On the other result, a negative correlation was observed between diatoms and d-silica. Furthermore, the results of principal component analysis to the overall water quality were classified into four main factors with contribution rate 81.071%.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
• /
• pp.407-410
• /
• 1996

This paper presents how to build a human sensibility database by multivariate method. And, we discribe a fuzzy based inference system which converts human sensibility data to design factors using the human sensibility database. We are able to obtain the values of multiple correlation coeffcient, partial correlation coefficient, and categories by the quantification theory which is multivariate analysis. So, the human sensibility database is constructed from those values. The inference system will be more useful, if the human sensibility database and graphic design factor database were integrated.

• 응용통계연구
• /
• 제25권4호
• /
• pp.589-603
• /
• 2012

Mahalanobis-Taguchi system(MTS) is a statistical tool for classifying the normal group and abnormal group in multivariate data structures. In addition to the classification itself, the MTS uses a method for selecting variables useful for the classification. This method can be used efficiently especially when the abnormal group data are scattered without a specific directionality. When the feedback adjustment procedure through the measurements of the process output for controlling process input variables is not practically possible, the reset procedure can be an alternative one. This article proposes a reset procedure using the MTS. Moreover, a method for identifying input variables to reset is also proposed by the use of the contribution. The identification of the root-cause parameters using the existing dimension-reduced contribution tends to be difficult due to the variety of correlation relationships of multivariate data structures. However, it became possible to provide an improved decision when used together with the location-centered contribution and the individual-parameter contribution.

• 한국조경학회지
• /
• 제13권1호
• /
• pp.43-66
• /
• 1985

Korea needs proper and rational public policies on conservation and use of forest land and other natural resources because of the accelerating expansion of national land developments in recent years. Unfortunately, there is no systematic planning system to support the needs. Generally, forest land use planning needs suitability analysis based on efficient land classification system. The goal of this study was to classify a forest land using multivariate satistical methods. A case study was carried out in winter of 1983 on a mountainous area higher than 100m above sea level located at Mt. Kwanak in Anyang -city, Kyung-gi-do (province). The study area was 19.80 km$^2$wide and was divided into 1, 383 Operational Taxonomic Units (OTU's) by a 120m$\times$120m grid. Fourteen descriptors were identified and quantified for each OTU from existing national land data : elevation, slope, aspect, terrain form, geologic material, surface soil permeability, topsoil type, depth of the solum, soil acidity, forest cover type, stand size class, stand age class, stand density class, and simple forest soil capability class. For this study, a FORTRAN IV program was written for input and output map data, and the computer statistics packages, SPSS and BMD, were used to perform the multivariate statistical analysis. Fourteen variables were analyzed to investigate the characteristics of their fire quench distribution and to estimate the correlation coefficients among them. Principal component analysis was executed to find the dimensions of forest land characteristics, and factor scores were used for proper samples of OTU throughout the study area. In order to develop the classes of forest land classification based on 102 surrogates, cluster and discriminant analyses of principal descriptor variable matrix were undertaken. Results obtained through a series of multivariate statistical analyses were as follows ; 1) Principal component analysis was proved to be a useful tool for data selection and identification of principal descriptor variables which represented the characteristics of forest land and facilitated the selection of samples.

• Structural Engineering and Mechanics
• /
• 제88권6호
• /
• pp.569-581
• /
• 2023

This paper introduces a system to detect and diagnose anomalies in pumped storage hydropower plants. We collect data from various types of sensors, including those monitoring temperature, vibration, and power. The data are classified according to the operation modes (pump and turbine operation modes) and normalized to remove the influence of the external environment. To detect anomalies and diagnose their types, we adopt a multivariate normal distribution analysis by learning the distribution of the normal data. The feasibility of the proposed system is evaluated using actual monitoring data of a pumped storage hydropower plant. The proposed system can be used to implement condition monitoring systems for other plants through modifications.

• Nuclear Engineering and Technology
• /
• 제51권1호
• /
• pp.45-53
• /
• 2019

Thermal-hydraulic passive safety systems (PSSs) are incorporated into many advanced reactor designs on the bases of simplicity, economics and inherent safety nature. Several factors among which are the critical parameters (CPs) that influence failure and reliability of thermal-hydraulic (t-h) passive systems are now being explored. For simplicity, it is assumed in most reliability analyses that the CPs are independent whereas in practice this assumption is not always valid. There is need to critically examine the dependency influence of the CPs on reliability of the t-h passive systems at design stage and in operation to guarantee safety/better performance. In this paper, two multivariate analysis methods (covariance and conditional subjective probability density function) were presented and applied to a simple PSS. The methods followed a generalized procedure for evaluating t-h reliability based on dependency consideration. A passively water-cooled steam generator was used to demonstrate the dependency of the identified key CPs using the methods. The results obtained from the methods are in agreement and justified the need to consider the dependency of CPs in t-h reliability. For dependable t-h reliability, it is advisable to adopt all possible CPs and apply suitable multivariate method in dependency consideration of CPs among other factors.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2005년도 추계학술대회
• /
• pp.300-310
• /
• 2005

Mahalanobis Taguchi System (MTS) is developed by Genishi Taguchi as a part of his quality engineering methodology. The basic idea of Taguchi's quality engineering is looking for the way of effectiveness of analyzing multivariate system. In the MTS, with the standardized variables of healthy normal data, Mahalanobis Distance(MD) calculated and that can be discriminate between normal and abnormal objects. If this discrimination process is successful, next step is optimization which is try to reduce number of attributes by neglecting less effective attributes to MD. Orthogonal Array (OA) and Signal to Noise ratio (S/N) are used to evaluate the amount contribution of each attribute to the MD. Wisconsin Breast Cancer study, from machining learning repository at University of California at Irvine, used for examining the discriminant ability of MTS.

• 한국국방경영분석학회지
• /
• 제6권2호
• /
• pp.89-127
• /
• 1980

The multivariate analysis techniques of cluster analysis are examined in this article. The theory and applications of the techniques and computer software concerning these techniques are discussed and sample jobs are included. A hierarchical cluster analysis algorithm, available in the IMSL software package, is applied to a set of data extracted from a group of subjects for the purpose of partitioning a collection of 26 attributes of a weapon system into six clusters of superattributes. A nonhierarchical clustering procedure were applied to a collection of data of tanks considering of twenty-four observations of ten attributes of tanks. The cluster analysis shows that the tanks cluster somewhat naturally by nationality. The principal componant analysis and the discriminant analysis show that tank weight is the single most important discriminator among nationality although they are not shown in this article because of the space restriction. This is a part of thesis for master's degree in operations research.

• Korean Chemical Engineering Research
• /
• 제45권1호
• /
• pp.87-92
• /
• 2007

최근 공정의 이상을 감지하고 진단하기 위한 공정 모니터링 시스템의 개발이 공정 시스템 분야에서 많은 주목을 받고 있다. 공정으로부터 얻어지는 데이터는 공정의 특성에 대한 유용한 정보를 제공하고 이는 공정의 모델링과 모니터링 그리고 제어에 사용된다. 현대의 화학 및 환경 공정은 고차원적인 특성과 변수간의 강한 상관관계와 동특성 그리고 비선형적 특성을 가지고 있어 모델 기반 접근을 통해 공정을 분석하는 것을 쉽지 않다. 이러한 모델 기반 접근의 한계를 극복하기 위해 많은 시스템 엔지니어와 연구자들이 주성분 분석법(principal component analysis, PCA) 또는 부분 최소 자승법(partial least squares, PLS)과 같은 다변량 분석을 접목한 통계 기반 접근법에 초점을 맞추고 있다. 또한 동특성, 비선형성 등과 같은 특성을 가진 공정에 적용하기 위해 많은 다변량 분석법들이 보완되었다. 여기에서는 동적 주성분 분석법(dynamic PCA)과 케노니컬 변수 분석법(canonical variate analysis)을 이용한 결측 데이터의 예측법과 공정 변수의 복원을 통한 센서 오작동의 판별법에 대해 언급해 보고자 한다.