• Progress in Medical Physics
• /
• v.8 no.1
• /
• pp.69-79
• /
• 1997

Stability of the properties of magnetite particles in novel medicinal magnetic ointments of multipurpose application has been studied by M ssbauer spectroscopy. It has been found that the comparative analysis of the results obtained by model fitting of $^{57}$ Fe nuclei spectra with those known for the system Fe$_3$O$_4$-${\gamma}$-Fe$_2$O$_3$ allows to identify the phase composition of the particles. It is noted that this composition, as well as that of the initial pure component in the form of a highly dispersed fraction (~100$\AA$), differs noticeably from the stoichiometric one. From the magnetic hyperfine field despite small particle sizes, the particles exhibit no superparamagnetism (in the temperature range from 95 to 300K). Radiative sterilization of the ointments has no effect on the magnetic component composition.

• Nuclear Engineering and Technology
• /
• v.43 no.1
• /
• pp.19-24
• /
• 2011

These experimental studies are carried out to build a database for analyzing fuel performance in nuclear power plants. In particular, this study focuses on the mechanical and irradiation properties of three kinds of zirconium alloy (Alloy A, Alloy B and Alloy C) irradiated in the HANARO (High-flux Advanced Neutron Application Reactor), one of the leading multipurpose research reactors in the world. Yield strength and ultimate tensile strength were measured to determine the mechanical properties before and after irradiation, while irradiation growth was measured for the irradiation properties. The samples for irradiation testing are classified by texture. For the irradiation condition, all samples were wrapped into the capsule (07M-13N) and irradiated in the HANARO for about 100 days (E > 1.0 MeV, $1.1{\times}10^{21}\;n/cm^2$). These tests and results indicate that the mechanical properties of zirconium alloys are similar whether unirradiated or irradiated. Alloy B has shown the highest yield strength and tensile strength properties compared to other alloys in irradiated condition. Even though each of the zirconium alloys has a different alloying content, this content does not seem to affect the mechanical properties under an unirradiated condition and low fluence. And all the alloys have shown the tendency to increase in yield strength and ultimate tensile strength. Transverse specimens of each of the zirconium alloys have a slightly lower irradiation growth tendency than longitudinal specimens. However, for clear analysis of texture effects, further testing under higher irradiation conditions is needed.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.39 no.5
• /
• pp.86-96
• /
• 1997

The arrangement of small streams in rural area, in the past times, attached importance to the prevention of flood damage through the straightening and lining of streams. Recently, the way of small stream arrangement is introducing the idea of water friendly environment or friendly space. As a result, there has been much concern with water favorable river management model which may lead to control flood. However, it is very difficult to develop a model applicable to all types of rivers, since each river has different flow velocity, flow amount and unique ecological characteristics. In this study, photo processing technique, one of landscape simulation methods, has been adopted because it helps to visually express and comprehensively evaluate pre and post scenery and easily applicable. Some important guideline and technique for the planning of small stream landscape arrangement are mentioned in this study. The simulation system for acquiring water favorable space and arranging landscapes needs to develop database which can forecast various types of landscape. It may also be used for the bases of planning and designing river environment arrangement. Computer aided image processing system enables to make selective planning in river environment arrangement. It may also enables to develop the methods for river environment development, ecology conservation, and multipurpose space utilization. Moreover, it makes economic river arrangement by applying river environment arrangement methods relevant to geographical characteristics. There are some limitations in this study, such as shortage of exact investigation on the stream direction and velocity in landscape arrangement. Continuous monitoring and research may be required to develop techniques through the application of computer graphics and digital image processing.

• Journal of Environmental Science International
• /
• v.19 no.1
• /
• pp.39-45
• /
• 2010

When the Juam multipurpose dam which is connected with existing large water supply facilities is finished, water environment is changed from stream to lake. The changed quality of water should be examined. In this study, the result of water quality forecasting is analysed and an effective management plan of water quality is presented. Tn this study, the WASPS model that is a dynamic water quality simulation model was selected to forecast the water quality. This model forecasts movement of change of pollutants. For an application of the model, the subject areas were divided into seventeen sub-areas by considering change temperature depending measuring points and on depth of water. Meteorological data collected by the meteorological observatory and data about quality measured by the Korea Water Resources Development Corporation were used for an operation of the model. As a result of quality examination through quality data and estimated pollutant loading, the water quality environment criterion was grade II and the nutritive condition was measured as meso-graphic grade. In this study, an effective management was planned to improve water quality by reducing pollution load. According to the result of examination, when more than 30% of BOD was reduced it was recorded that the environment standard of water quality was improved to the second grade.

• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.413-423
• /
• 1998

Dental ceramics exhibit excellent esthetic property, compressive strength, chemical durability, biocompatibility and translucency. This study evaluated the shear bond strength of composite resin to the new heat-pressed ceramic material (IPS-Empress System) depending on the surface treatments and bonding agents. The surface treatments were etching with 4.0% hydrofluoric acid, application of silane, and the combination of the two methods. Composite resin was bonded to ceramic with four kinds of dentin bonding agents(All-Bond 2, Heliobond, Scotch bond Multi-purpose and Tenure bonding agents). The ceramic specimen bonded with composite resin was mounted in the testing jig, and the universal testing machine(Zwick 020, Germany) was used to measure the shear bond strength with the cross head speed of 0.5 mm/min. The results obtained were as follows 1. The mean shear bond strength of the specimens of which the ceramic surface was treated with the combination of hydrofluoric acid and silane before bonding composite resin was significantly higher than those of the other surface treatment groups(p<0.05). 2. In the case of All-Bond 2 and Scotchbond Multi-purpose bonding agent group, the surface treatment methods did not influenced significantly on the shear bond(p>0.05). 3. Of the four bonding agents tested, the shear bond strength of Heliobond was significantly lower than those of other bonding agents regardless of the surface treatment methods(p<0.05). 4. The highest shear bond strength($12.55{\pm}1.92$ MPa) was obtained with Scotchbond Multipurpose preceded by the ceramic surface treatment with the combination of 4% hydrofluoric acid and silane.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.2
• /
• pp.141-157
• /
• 2012

For the application TBM tunneling method, Both tunnel design standard and case study designed & constructed in domestic and foreign have been conducted. According to the study, the number of lane and inner shape (single or duplex) vary depending on the volume of traffic. Also extra space located in the top and bottom of tunnel is used for a multipurpose such as ventilation, disaster prevention, maintenance and administration. To find area ratio according to the components of road TBM tunnel, a standard section was considered as a two-lane road. Then, the analysis of area ratio of this section which consists of components for clearance, extra space in upper and lower tunnel was carried on two widths of shoulder. In addition, after a structural analysis, a thickness requirement of lower slab which is essential for road tunnel was derived on a few supporting types. Through correlation analysis, the ranges of available cross-sectional area between slab thickness and lower extra space of the tunnel was presented.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.1
• /
• pp.77-84
• /
• 2011

The methods of the rational formula and Kajiyama formula have been widely used for estimating the peak flood for design to all kind of hydraulic structure. However, there are many limitations and we have to apply these methods to ungauged basin. These methods require to calculate the Probable Maximum Precipitation (PMP) before determining the Probable Maximum Flood (PMF). Creager's method (Creager et al., 1945) is a kind of estimation of specipic flood and this method provided nonlinear equations based on relationship between the drainage area and PMF in order to calculate the PMF of multipurpose dams over medium-sized. But this method has not much applied in Korea. Creager's coefficient is not clear about its application because this method has never been applied to dams in Korea. Based on the PMP for rainfull-runoff models with the PMF of small and larger dams in this research, the range and standard of Creager's coefficients with parameters are proposed to apply basin areas in Korea.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.11
• /
• pp.953-960
• /
• 2021

Korea Astronomy and Space Science Institute has been verifying the multipurpose laser tracking system with three functions of satellite laser tracking, adaptive optics and space debris laser tracking for not only scientific research but also national space missions. The system employs an optical telescope consisting of a 100 cm primary mirror and an altazimuth mount for fast and precise tracking. The precise pointing and tracking capability in a tracking mount is considered as one of important performance metrics in the fields of automatic tracking and precise application research. So it is required to analyze a mount model for investigating pointing error factors and compensating pointing error. In this study, we investigated various factors causing static pointing errors of tracking mount and analyzed the pointing accuracy of the tracking mount at Geochang observatory by estimating mount parameters based on the least square method.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.6
• /
• pp.626-648
• /
• 2021

Domestically, demands for multi-purpose performance venues which accommodate various performance genres have increased. However, those venues have limited capability and confined to a primary performance. The present work investigated various methods for controlling the acoustics of room for required performance genres by reviewing aurally presented and published materials. The method of varying the acoustics of a space is called Variable Acoustics, and adjusted in either passive and active ways. Passive control encompasses variable absorption, variable volume, coupled volume, and canopy reflectors, where the acoustics of a room is controlled in an architectural way. Active control includes In-line, Regenerative, and Hybrid systems where the acoustics of a room is manipulated electronically. The mechanism and application of each passive control system in existing venues are reviewed and their pros and cons are discussed. Also, the concept of each active systems and product applications are looked at through literature reviews. Lastly, some considerations that need to be taken into in the planning and design stage of a multi-purpose hall using Variable Acoustics are suggested.

• Clean Technology
• /
• v.30 no.1
• /
• pp.13-22
• /
• 2024

In this study, blended 6,13-Bis(triisopropylsilylethynyl)pentacene (TP):2-Decyl-7-phenyl[1]benzothieno[3,2-b][1] benzothiophene (BT):Poly styrene (PS) TFT at different ratios were explored for their potential application as light absorption sensors. Due to the mixing of BT, both off current reduction and on/off ratio improvement were achieved at the same time. In particular, the TP:BT:PS (1:0.25:1 w/w) sample showed excellent light absorption characteristics, which proved that it is possible to manufacture a high-performance light absorption device. Through analysis of the crystal structure and electrical properties of the various mixing ratios, it was confirmed that the TP:BT:PS (1:0.25:1 w/w) sample was optimal. The results of this study outline the expected effects of this innovation not only for the development of light absorption devices but also for the development of mixed organic semiconductor (OSC) optoelectronic systems. Through this study, the potential to create a multipurpose platform that overcomes the limitations of using a single OSC and the potential to fabricate a high-performance OSC TFT with a fine-tuned optical response were confirmed.