• Journal of Communications and Networks
• /
• v.17 no.3
• /
• pp.241-246
• /
• 2015

In this paper, we consider a relaying system which employs a single relay in a wireless network with distributed sources and destinations. Here, all source, destination, and relay nodes are equipped with multiple antennas. For amplify-and-forward relay systems, we confirm the achievable sum rate through a joint multiple source precoders and a single relay filter design. To this end, we propose a new linear processing scheme in terms of maximizing the sum rate performance by applying a blockwise relaying method combined with geometric programming techniques. By allowing the global channel knowledge at the source nodes, we show that this joint design problem is formulated as a standard geometric program, which can guarantees a global optimal value under the modified sum rate criterion. Simulation results show that the proposed blockwise relaying scheme with the joint power allocation method provides substantial sum rate gain compared to the conventional schemes.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.1
• /
• pp.50-67
• /
• 2015

The Cognitive Radio (CR) paradigm in tactical ad hoc networks is an important element of future military communications for network-centric warfare. This paper presents a novel Cognitive Link State Routing protocol for CR-based tactical ad hoc networks. The proposed scheme provides prompt and reliable routes for Primary User (PU) activity through procedures that incorporate two main functions: PU-aware power adaptation and channel switching. For the PU-aware power adaptation, closer multipoint relay nodes are selected to prevent network partition and ensure successful PU communication. The PU-aware channel switching is proactively conducted using control messages to switch to a new available channel based on a common channel list. Our simulation study based on the ns-3 simulator demonstrates that the proposed routing scheme delivers significantly improved performance in terms of average end-to-end delay, jitter, and packet delivery ratio.

• Journal of information and communication convergence engineering
• /
• v.12 no.2
• /
• pp.67-74
• /
• 2014

In multi-hop communication systems, two-way relaying is one of the solutions to mitigate the spectral efficiency loss caused by a half-duplex transmission. In this paper, a simple two-way relaying scheme is proposed for two-hop two-user multiple input multiple output (MIMO) systems. In the proposed system, a base station and a relay station (RS), both equipped with two antennas, form a point-to-point MIMO channel, while the RS and two single-antenna mobile users form a point-to-multipoint multiuser (MU)-MIMO channel. Numerical examples show that the proposed system achieves a significant sum rate gain as compared to a one-way relaying system as the distance between a relay and the two users decreases. We also show that although we can expand the proposed scheme to more than two users, its performance gain as compared to that of one-way relaying decreases with an increase in the number of users.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9B
• /
• pp.1601-1607
• /
• 1999

LMDS(Local Multipoint Distribution Service) is a broadband wireless transmission system in millimeter wave frequency. LMDS system is consisted with relay system to connect between head-end and hub and distribution system to connect between hub and subscribers. In this study, we develop point-to-point relay system to use back-bone system n LMDS network. We develop STM-1 transceiver over 27GHz and analyze the system performance. We can get the similar measurement results comparing the theoretical results and then prove that this system can fit LMDS back-bone network requirement. This is the first system in Korea and we expect this system can apply the various network.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.4
• /
• pp.1571-1589
• /
• 2016

Nodes in MANETs are battery powered which makes energy an invaluable resource. In OLSR, MPRs are special nodes that are selected by other nodes to relay their data/control traffic which may lead to high energy consumption of MPR nodes. Therefore, employing energy efficient MPR selection mechanism is imperative to ensure prolonged network lifetime. However, misbehaving MPR nodes tend to preserve their energy by dropping packets of other nodes instead of forwarding them. This leads to huge energy loss and performance degradation of existing energy efficient MPR selection schemes. This paper proposes an energy efficient secure MPR selection (ES-MPR) technique that takes into account both energy and security metrics for MPR selection. It introduces the concept of 'Composite Eligibility Index' (CEI) to examine the eligibility of a node for being selected as an MPR. CEI is used in conjunction with willingness to provide distinct selection parameters for Flooding and Routing MPRs. Simulation studies reveal the efficiency of ES-MPR in selection of energy efficient secure and stable MPRs, in turn, prolonging the network operational lifetime.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8B
• /
• pp.657-667
• /
• 2012

In the MPR selection algorithm of Optimized Link State Routing (OLSR), each node selects own MPRs independently, so most of nodes are selected to MPR at least once. To cope with this problem, the MPR candidate selection algorithm was proposed. The MPR candidate selection algorithm can reduce the number of MPRs, but the efficiencies of route and connectivity decline due to decreased number of MPRs. So, in this paper, we propose the Significant Multi-Point Relay (S-MPR) selection algorithm which can enhance the performance of ad hoc network by improving the MPR selection algorithm of OLSR. In proposed S-MPR selection algorithm, each node selects the most important node to S-MPR to guarantee the connectivity then selects remaining MPRs in MPR candidates. So proposed S-MPR selection algorithm can reduce the overhead of many MPRs without decline of routing performance. To show the performance gain of proposed S-MPR selection algorithm, we simulate the proposed S-MPR selection algorithm by using OPNET.

• International Journal of Computer Science & Network Security
• /
• v.22 no.4
• /
• pp.131-138
• /
• 2022

A Mobile Ad-hoc Network (MANET) is a collection of moving nodes that communicate and collaborate without relying on a pre-existing infrastructure. In this type of network, nodes can freely move in any direction. Routing in this sort of network has always been problematic because of the mobility of nodes. Most existing protocols use simple routing algorithms and criteria, while another important criterion is path selection. The existing protocols should be optimized to resolve these deficiencies. 'Particle Swarm Optimization (PSO)' is an influenced method as it resembles the social behavior of a flock of birds. Genetic algorithms (GA) are search algorithms that use natural selection and genetic principles. This paper applies these optimization models to the OLSR routing protocol and compares their performances across different metrics and varying node sizes. The experimental analysis shows that the Genetic Algorithm is better compared to PSO. The comparison was carried out with the help of the simulation tool NS2, NAM (Network Animator), and xgraph, which was used to create the graphs from the trace files.

• International Journal of Computer Science & Network Security
• /
• v.22 no.10
• /
• pp.137-144
• /
• 2022

Wireless community networks (WCNs) are considered another form of ownership of internet protocol (IP) networks, where community members manage and own every piece of equipment in a decentralized way, and routing for traffic is done in a cooperative manner. However, the current routing protocols for WCNs suffer from stability and scalability issues. In this paper, an enhanced routing protocol is proposed based on the optimized link state routing (OLSR) protocol to meet the standards of efficiency in terms of stability and scalability. The proposed routing protocol is enhanced through two phases: multicasting expansion and multipoint relay (MPR) selection based on an analytical hierarchical process (AHP). The experimental results demonstrate that the proposed routing protocol outperforms the OLSR protocol in terms of network control overhead and packet delivery ratio by 18% and 1% respectively.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.9
• /
• pp.3449-3467
• /
• 2015

A broadcast operation is the fundamental transmission technique in mobile ad-hoc networks (MANETs). Because a broadcast operation can cause a broadcast storm, only selected forwarding nodes have the right to rebroadcast a broadcast message among the one-hop and two-hop neighboring nodes of a sender. This paper proposes the maximum intersection self-pruning (MISP) algorithm to minimize broadcasting redundancy. Herein, an example is given to help describe the main concept of MISP and upper bounds of forward node have been derived based on induction. A simulation conducted demonstrated that when conventional blind flooding (BF), self-pruning (SP), an optimized link state routing (OLSR) multipoint relay (MPR) set, and dominant pruning (DP), are replaced with the MISP in executing Strong duplicate address detection (DAD), the performances in terms of the energy consumption, upper bounds of the number of forward nodes, and message complexity have been improved. In addition, to evaluate the performance in reference to the link error probability, P_e, an enhancement was achieved by computing a proposed retransmission limit, S, for error recovery based on this probability. Retransmission limit control is critical for efficient energy consumption of MANET nodes operating with limited portable energy where Strong DAD reacts differently to link errors based on the operational procedures.

• Journal of Integrative Natural Science
• /
• v.11 no.4
• /
• pp.197-203
• /
• 2018

Long Term Evolution-Advanced (LTE-A) is the next drive in the broadband mobile communication, which allows operators to improve networks performance and service capabilities. LTE-A targets the peak data rates of 1Gbps in the downlink and 500Mbps in the uplink. This requirement is only fulfilled by a transmission bandwidth of up to 100MHz. However the accessibility of such large part of the contiguous spectrum is uncommon in practice. Therefore LTE-A uses some new features on top of the existing LTE standards to provide very high data rate transmission. Some of the most significant features introduced in LTE-A are carrier aggregation, heterogeneous network enhancement, coordinated multipoint transmission and reception, enhanced multiple input and multiple output, and development relay nodes with universal frequency reuse. This review paper presents an overview of the above mentioned LTE-A key features and functionalities. Based on this review, in the conclusion we discuss the current technical challenges for future broadband mobile communication systems.