• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.2
• /
• pp.139-144
• /
• 2011

The modern digital logic technology does not yet satisfy the speed requirements of real-time DSP circuits due to synchronized operation of multiplication and accumulation. This operation degrades DSP performance. Therefore, the double-base number system (DBNS) has emerged in DSP system as an alternative methodology because of fast multiplication and hardware simplicity. In this paper, authors propose a novel multiplication architecture. One operand is an output of a flash analog-to-digital converter (ADC) in DBNS format, while the other operand is a coefficient in the IEEE standard floating-point number format. The DBNS digital output from ADC is produced through a new double base number encoder (DBNE). The multiplied output is in the format of the IEEE standard floating-point number (FPNS). The proposed circuits process multiplication and conversion together. Compared to a typical multiplier that uses the FPNS, the proposed multiplier also consumes 45% less gates, and 44% faster than the FPNS multiplier on Spartan-3 FPGA board. The design is verified with FIR filter applications.

• Journal of the Korean School Mathematics Society
• /
• v.22 no.3
• /
• pp.303-327
• /
• 2019

This study proposed an integrated approach to multiplication as a way to help students understand multiplication in elementary mathematics. The integrated approach to multiplication is to give students a broad understanding of multiplication by solving a situation of multiplication in a variety of ways in mathematics classes, exploring and discussing each other's methods. The integrated approach to multiplication was derived from a number of previous studies that emphasized various approaches, a consistent approach, and a specific approach to multiplication. As results, the integrated approach of multiplication can be interpreted in four ways as a situation of multiplication, and each method is connected to important characteristics of multiplication emphasized in previous studies. In addition, this study has theoretically confirmed that the integrated approach to multiplication is important not only for multiplication but also for division, fraction and operation of fractions, ratios, rates, and proportions. This study is expected to provide some implications for teachers with regard to multiplication in elementary school mathematics.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.1
• /
• pp.118-125
• /
• 2016

This paper presents a new high-efficient algorithm and architecture for an elliptic curve cryptographic processor. To reduce the computational complexity, novel modified Lopez-Dahab scalar point multiplication and left-to-right algorithms are proposed for point multiplication operation. Moreover, bit-serial Galois-field multiplication is used in order to decrease hardware complexity. The field multiplication operations are performed in parallel to improve system latency. As a result, our approach can reduce hardware costs, while the total time required for point multiplication is kept to a reasonable amount. The results on a Xilinx Virtex-5, Virtex-7 FPGAs and VLSI implementation show that the proposed architecture has less hardware complexity, number of clock cycles and higher efficiency than the previous works.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.18 no.1
• /
• pp.1-9
• /
• 2022

Galois field arithmetic is important in error correcting codes and public-key cryptography schemes. Hardware realization of these schemes requires an efficient implementation of Galois field arithmetic operations. Multiplication is the main finite field operation and designing efficient multiplier can clearly affect the performance of compute-intensive applications. Diverse algorithms and hardware architectures are presented in the literature for hardware realization of Galois field multiplication to acquire a reduction in time and area. This paper presents a low complexity semi-systolic multiplier to facilitate parallel processing by partitioning Montgomery modular multiplication (MMM) into two independent and identical units and two-level systolic computation scheme. Analytical results indicate that the proposed multiplier achieves lower area-time (AT) complexity compared to related multipliers. Moreover, the proposed method has regularity, concurrency, and modularity, and thus is well suited for VLSI implementation. It can be applied as a core circuit for multiplication and division/exponentiation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.784-787
• /
• 2004

The most time-consuming back-bone operation in an elliptic curve cryptosystem is scalar multiplication. In this paper, we propose a method of inducing a GF operation named point quadruple operation to be used in the quad-and-add algorithm, whith was achieved by refining the traditional double-and-add algorithm. Induced expression of the algorithm was verified and proven by C program in a real model of calculation. The point quadruple operation can be used in fast and efficient implementation of scalar multiplication operation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.12
• /
• pp.1882-1889
• /
• 2021

This paper describes a high-performance hardware implementation of modular multiplication used as a core operation in elliptic curve cryptography. A 521-bit high-performance modular multiplier for NIST P-521 curve was designed by adopting 3-way Toom-Cook integer multiplication and fast reduction algorithm. Considering the property of the 3-way Toom-Cook algorithm in which the result of integer multiplication is multiplied by 1/3, modular multiplication was implemented on the Toom-Cook domain where the operands were multiplied by 3. The modular multiplier was implemented in the xczu7ev FPGA device to verify its hardware operation, and hardware resources of 69,958 LUTs, 4,991 flip-flops, and 101 DSP blocks were used. The maximum operating frequency on the Zynq7 FPGA device was 50 MHz, and it was estimated that about 4.16 million modular multiplications per second could be achieved.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.2
• /
• pp.44-50
• /
• 1993

In this paper, we will present an array processor for implementation of digital neural networks. Back-propagation model can be formulated as a consecutive matrix-vector multiplication problem with some prespecified thresholding operation. This operation procedure is suited for the design of an array processor, because it can be recursively and repeatedly executed. Systolic array circuit architecture with Residue Number System is suggested to realize the efficient arithmetic circuit for matrix-vector multiplication and compute sigmoid function. The proposed design method would expect to adopt for the application field of neural networks, because it can be realized to currently developed VLSI technology.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.6
• /
• pp.736-743
• /
• 2020

Modular multiplication is one of the most important arithmetic operations in public-key cryptography such as elliptic curve cryptography (ECC) and RSA, and the performance of modular multiplier is a key factor influencing the performance of public-key cryptographic hardware. An efficient hardware implementation of word-based Montgomery modular multiplication algorithm is described in this paper. Our modular multiplier was designed to support eleven field sizes for prime field GF(p) and binary field GF(2k) as defined by SEC2 standard for ECC, making it suitable for lightweight hardware implementations of ECC processors. The proposed architecture employs pipeline scheme between the partial product generation and addition operation and the modular reduction operation to reduce the clock cycles required to compute modular multiplication by 50%. The hardware operation of our modular multiplier was demonstrated by FPGA verification. When synthesized with a 65-nm CMOS cell library, it was realized with 33,635 gate equivalents, and the maximum operating clock frequency was estimated at 147 MHz.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.5 s.311
• /
• pp.36-43
• /
• 2006

In this paper we present a new high-speed parallel multiplier for Performing the bit-parallel multiplication of two polynomials in the finite fields $GF(2^m)$. Prior to construct the multiplier circuits, we consist of the MOD operation part to generate the result of bit-parallel multiplication with one coefficient of a multiplicative polynomial after performing the parallel multiplication of a multiplicand polynomial with a irreducible polynomial. The basic cells of MOD operation part have two AND gates and two XOR gates. Using these MOD operation parts, we can obtain the multiplication results performing the bit-parallel multiplication of two polynomials. Extending this process, we show the design of the generalized circuits for degree m and a simple example of constructing the multiplier circuit over finite fields $GF(2^4)$. Also, the presented multiplier is simulated by PSpice. The multiplier presented in this paper use the MOD operation parts with the basic cells repeatedly, and is easy to extend the multiplication of two polynomials in the finite fields with very large degree m, and is suitable to VLSI. Also, since this circuit has a low propagation delay time generated by the gates during operating process because of not use the memory elements in the inside of multiplier circuit, this multiplier circuit realizes a high-speed operation.

• Korean Journal of Mathematics
• /
• v.22 no.1
• /
• pp.181-206
• /
• 2014

Let $R={\bigoplus}_{\alpha{\in}\Gamma}R_{\alpha}$ be a graded integral domain graded by an arbitrary grading torsionless monoid ${\Gamma}$, and ⋆ be a semistar operation on R. In this paper we define and study the graded integral domain analogue of ⋆-Nagata and Kronecker function rings of R with respect to ⋆. We say that R is a graded Pr$\ddot{u}$fer ⋆-multiplication domain if each nonzero finitely generated homogeneous ideal of R is ⋆$_f$-invertible. Using ⋆-Nagata and Kronecker function rings, we give several different equivalent conditions for R to be a graded Pr$\ddot{u}$fer ⋆-multiplication domain. In particular we give new characterizations for a graded integral domain, to be a $P{\upsilon}MD$.