• Journal of the Korean Society for Nondestructive Testing
• /
• v.10 no.1
• /
• pp.84-90
• /
• 1990

By discriminating the wave propagation paths in cylindrical vessels, a technique for AE source location has been proposed. This method is based on the path difference between several propagating directions from a source to a sensor. One sensor can receive multiple waveforms sequentially including a direct arrival and several others propagated through the circumferential direction. An wave front normally propagates in all directions and as many waveforms can reach the sensor until the signal faded out by attenuation. Only the first four arrivals suffice the condition for calculating the source location. The proposed method was examined for an actual cylindrical vessel by the source location experiment using simulated AE sources. The test showed very promising results and the method can be utilized for a simple AE source location without multi-channel instruments.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.5
• /
• pp.109-116
• /
• 2010

In this paper, we propose a method for extracting predominant melody of polyphonic music based on harmonic structure. Since polyphonic music contains multiple sound sources, the process of melody detection consists of extraction of multiple fundamental frequencies and determination of predominant melody using those fundamental frequencies. Harmonic structure is an important feature parameter of monophonic signal that has spectral peaks at the integer multiples of its fundamental frequency. We extract all fundamental frequency candidates contained in the polyphonic signal by verifying the required condition of harmonic structure. Then, we combine those harmonic peaks corresponding to each extracted fundamental frequency and assign a rank to each after calculating its harmonic average energy. We finally run pitch tracking based on the rank of extracted fundamental frequency and continuity of fundamental frequency, and determine the predominant melody. We measure the performance of proposed method using ADC 2004 DB and 100 Korean pop songs in terms of MIREX 2005 evaluation metrics, and pitch accuracy of 90.42% is obtained.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.8 s.173
• /
• pp.143-150
• /
• 2005

To verify applicability of multi-dimensional spectral analysis (MDSA) fur noise source identification two different approaches which are frequency response and coherent function have been investigated. The coherence function approach appears able to separate the correlated system when the noise sources were coherent. In this study, we identify contribution of structure-borne-noise of vehicle HVAC system using MDSA method. Firstly, to identify the applicability of MDSA method, 4-inputs of vehicle HVAC system were the signals measured by accelerometers attached on the selected noise sources which were composed of blower, evaporator, heater and duct. While 1-output which was driver's position sound was the SPL signals measured by a remote microphone, when the blower motor was operating. We identify efficiency of systems modeled with four Inputs/single output through ordinary coherence function (OCF) and partial coherence function (PCF). As a result of experiment, the blower accounted for $62-88\%$ of the overall level of sound energy density. Also, according to the analysis of acoustic signal and vibration signals measurement, an investigation of the noise source identification in the vehicle HVAC is presented. With the sound intensity method, the major sources of the vehicle HVAC radiation are verified. Also the method of improving the noise reduction is proposed by attaching damping patch access to blower motor and noise reduction is verified.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.480-483
• /
• 2018

In this paper, we study the interference canceling and image sensing processing technology of multiple light sources for high speed transmission in CMOS sensor based visible light communication system. To improve transmission capacity in optical camera communications via image sensors, different data must be transmitted simultaneously from each LED. However, multiple LED light source environments for high-speed transmission can cause interference between adjacent LEDs. In this case, since the visible light communication system generally uses intensity modulation, when a plurality of LEDs transmit data at the same time, it is difficult to accurately detect the respective LEDs due to the light scattering interference of the adjacent LEDs. In order to solve this problem, the ON / OFF state of many LEDs of the light source is accurately recognized by using a dual CMOS sensor, and the spectral estimation technique and the pixel image signal processing technique of each LED are proposed. This technique can accurately recognize multiple LED pixels and improve the total average bit error rate and throughput of a MISO-VLC system.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.5
• /
• pp.923-930
• /
• 2018

In the wireless communication system based on an array antenna, the angle of arrival (AOA) information of signal is very important element and various AOA estimation algorithms have been studied. Although most AOA estimation algorithms employ the uniform linear array (ULA), some algorithms apply the planar array (PA) antenna. In this paper, we present an algorithm for efficiently estimating AOAs of adjacent multiple signals, based on the uniform rectangular array antenna. This approach has two steps; after approximately estimating AOA groups consisting of the closely located signal sources using CAPON, accurately estimating the individual AOA of each signal in the estimated AOA group using Beamsapce MUSIC. The estimation performance of the presented cascade AOA algorithm is illustrated through the computer simulation example.

• Journal of Information Processing Systems
• /
• v.10 no.1
• /
• pp.145-161
• /
• 2014

Recently, many large organizations have multiple data sources (MDS') distributed over different branches of an interstate company. Local patterns analysis has become an effective strategy for MDS mining in national and international organizations. It consists of mining different datasets in order to obtain frequent patterns, which are forwarded to a centralized place for global pattern analysis. Various synthesizing models [2,3,4,5,6,7,8,26] have been proposed to build global patterns from the forwarded patterns. It is desired that the synthesized rules from such forwarded patterns must closely match with the mono-mining results (i.e., the results that would be obtained if all of the databases are put together and mining has been done). When the pattern is present in the site, but fails to satisfy the minimum support threshold value, it is not allowed to take part in the pattern synthesizing process. Therefore, this process can lose some interesting patterns, which can help the decider to make the right decision. In such situations we propose the application of a probabilistic model in the synthesizing process. An adequate choice for a probabilistic model can improve the quality of patterns that have been discovered. In this paper, we perform a comprehensive study on various probabilistic models that can be applied in the synthesizing process and we choose and improve one of them that works to ameliorate the synthesizing results. Finally, some experiments are presented in public database in order to improve the efficiency of our proposed synthesizing method.

• Journal of KIISE:Information Networking
• /
• v.37 no.5
• /
• pp.409-414
• /
• 2010

The applications based on geographical location are increasing rapidly in wireless sensor networks (WSN). Recently, various localization algorithms have been proposed but the majority of algorithms rely on the specific hardware to measure the distance from the signal sources. In this paper, we propose the Weighted Multiple Rings Localization(WMRL). We assume that each deployed anchor node may periodically emit the successive beacon signals of the different power level. Then, the beacon signals form the concentric rings depending on their emitted power level, theoretically. The proposed algorithm defines the different weighting factor based on the ratio of each radius of ring. Also, If a sensor node may listen, it can find the innermost ring of the propagated signal for each anchor node. Based on this information, the location of a sensor node is derived by a weighted sum of coordinates of the surrounding anchor nodes. Our proposed algorithm is fully distributed and does not require any additional hardwares and the unreliable distance indications such as RSSI and LQI. Nevertheless, the simulation results show that the WMRL with two rings twice outperforms centroid algorithm. In the case of WMRL with three rings, the accuracy is approximately equal to WCL(Weighted Centroid Localization).

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.5
• /
• pp.881-888
• /
• 2020

In this paper, in order to improve the degraded BER performance of the stronger channel user in non-orthogonal multiple access(: NOMA) with interactive mobile users, we propose the negative correlation bit-to-symbol(: B2S) mapping. First, the closed-form expression for the BER of the negative correlation B2S mapping receiver is derived, and then it is shown that the BER of the negative correlation B2S mapping receiver is improved, compared with those of the ideal perfect successive interference cancellation(: SIC) receiver and positive correlation receiver. Additionally, based on the analytical expression, signal-to-noise(: SNR) gain is calculated, and the superiority of the negative correlation B2S mapping receiver is validated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.7
• /
• pp.715-722
• /
• 2016

In this paper, by applying the linear least squared error algorithm, we derive an estimation technique for three dimensional target location when a number of radars are used in detecting a target. The proposed technique is then enhanced by combining GPS information and by assigning variable weights to information sources. The enhanced performance of proposed techniques is confirmed via simulation. It is also observed from simulation results that the performance is robust to the uncertainty of information.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1811-1812
• /
• 2006

본 논문은 공간상에서 움직이는 다중신호원의 신호 도달 방향 추정과 신호원이 보낸 신호를 다중 센서 어레이를 이용하여 판별하는 문제를 다룬다. 일반적으로 정지하고 있는 신호원의 방향 추정은 어레이에서의 출력 방정식의 방향 벡터들이 시불변인 상수이기 때문에 잡음환경 하에서도 샘플링된 벡터(Snapshot) 수가 늘어날수록 훨씬 정확하게 방향 추정이 가능하지만 신호원이 움직이는 경우에는 신호원의 방향이 변하게 되어 결국 어레이 방정식의 방향 벡터들이 시변이므로 추정값의 분산(variance)이 커지게 되어 정확한 추정이 어렵게 된다. 이러한 경우에 대한 정량적인 분석 예는 드물어 실제 여러 가지 추정 기법들의 특성이 어떻게 나타나는지 가늠하기가 어렵다. 따라서 본 논문에서는 이러한 경우에 대한 시나리오 예를 설정한 후 이 시나리오에 따른 랜덤 가우시안 잡음 하에서의 수치 데이터 모델을 생성하여 수신기에서는 미지의 값인 이 데이터에 대해 기존의 DOA 추정 기법을 이용하여 추정을 수행하여 그 정량적인 결과들을 계산해 봄으로써 시변인 경우에서의 그 성능을 판단해 보기로 한다.