• Korean Management Science Review
• /
• v.29 no.3
• /
• pp.121-134
• /
• 2012

In this study, we consider a component procurement planning problem where the procurement amounts of components are determined under assemble-to-order systems with demand uncertainty. In the problem, procurement amount of each component is decided before the demands of finished products are known and after the demands are identified the assembly amounts of the finished products are decided. In this study, the objective function of the problem is minimizing the total costs which are composed of purchase and inventory costs of the components and the backorder costs of the finished products. We assume that the uncertain demand information is given as multiple scenarios of the demands, and we propose procurement planning methods based on stochastic models which considering the multiple demand scenarios. To evaluate the performances of the proposed methods, computational experiments were carried out on the proposed methods as well as benchmarks including a method based on deterministic mathematical model and a heuristic. From the results of the computational tests, the superiorities of the proposed methods were shown.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.8
• /
• pp.2875-2893
• /
• 2015

Existing coding aware routing algorithms focused on novel routing metric design that captures the characteristics of network coding. However, in packet coding algorithm, they use opportunistic coding scheme which didn't consider the queue state of the coding node and are equivalent to the conventional store-and-forward method in light traffic load condition because they never delay packets and there are no packets in the output queue of coding node, which results in no coding opportunity. In addition, most of the existing algorithms assume that all flows participating in the network have equal rate. This is unrealistic since multi-rate environments are often appeared. To overcome above problem and expand network coding to light traffic load scenarios, we present an enhanced coding-aware routing algorithm based on queue state and local topology (OQMCAR), which consider the queue state of coding node in packet coding algorithm where the control policy is of threshold-type. OQMCAR is a unified framework to merge single rate case and multiple rate case, including the light traffic load scenarios. Simulations results show that our scheme can achieve higher throughput and lower end-to-end delay than the current mechanisms using COPE-type opportunistic coding policy in different cases.

• Nuclear Engineering and Technology
• /
• v.43 no.3
• /
• pp.271-278
• /
• 2011

When performing fire PSA in a nuclear power plant, an event mapping method, using an internal event PSA model, is widely used to reduce the resources used by fire PSA model development. Feasible initiating events and component failure events due to fire are identified to transform the fault tree (FT) for an internal event PSA into one for a fire PSA using the event mapping method. A surrogate event or damage term method is used to condition the FT of the internal PSA. The surrogate event or the damage term plays the role of flagging whether the system/component in a fire compartment is damaged or not, depending on the fire being initiated from a specified compartment. These methods usually require explicit states of all compartments to be modeled in a fire area. Fire event scenarios, when using explicit identification, such as surrogate or damage terms, have two problems: (1) there is no consideration of multiple fire propagation beyond a single propagation to an adjacent compartment, and (2) there is no consideration of simultaneous fire propagations in which an initiating fire event is propagated to multiple paths simultaneously. The present paper suggests a fire propagation equation to identify all possible fire event scenarios for an explicitly treated fire event scenario in the fire PSA. Also, a method for separating fire events was developed to make all fire events a set of mutually exclusive events, which can facilitate arithmetic summation in fire risk quantification. A simple example is given to confirm the applicability of the present method for a $2{\times}3$ rectangular fire area. Also, a feasible asymptotic approach is discussed to reduce the computational burden for fire risk quantification.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.12
• /
• pp.5015-5027
• /
• 2015

Transceiver optimization in multiple input multiple output (MIMO) cognitive systems is studied in this paper. The joint transceiver beamformer design is introduced to minimize the transmit power at secondary base station (SBS) while simultaneously controlling the interference to primary users (PUs) and satisfying the secondary users (SUs) signal-to-interference-plus-noise ratio (SINR) based on the convex optimization method. Due to the limited cooperation between SBS and PUs, the channel state information (CSI) usually cannot be obtained perfectly at the SBS in cognitive system. In this study, both perfect and imperfect CSI scenarios are considered in the beamformer design, and the proposed method is robust to CSI error. Numerical results validate the effectiveness of the proposed algorithm.

• ETRI Journal
• /
• v.36 no.4
• /
• pp.625-634
• /
• 2014

This paper studies a dual-hop multiple-access relay network where two independent source nodes transmit information to a common destination node with the aid of multiple single-antenna amplify-and-forward relays. Each relay node is subject to an individual power constraint. We focus on the design of distributed beamforming schemes for the relays to support the transmission rate requirements of the two sources. To this end, we first characterize the achievable rate region for this network via solving a sequence of corner point optimization problems proposed in this paper. We also develop several low-complexity suboptimal schemes in closed form. Two inner bounds of the achievable rate region are theoretically shown to be approximately optimal in two special scenarios. Finally, numerical results demonstrate the effectiveness of our proposed approaches.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11B
• /
• pp.987-996
• /
• 2006

In NEMO scenarios, mobile node's variety of movements and mobile router's point of attachment changes can result in handover. This handover process needs additional time to finish due to the multiple levels of indirection involved in NEMO. And the performance issues of mobile node's handover such as handover delay and packet loss in above cases haven't been studied thoroughly. So, in this paper, we define fast handover failure cases in hierarchical mobile IPv6 network based NEMO. We briefly described NEMO architecture and handover procedures of FMIPv6 and HMIPv6. And then, we classified mobile node or mobile router's movement pattern into several scenarios. Analysis for the fast handover classified NEMO scenarios, in terms of handover latency and packet delivery cost have been performed.

• Architectural research
• /
• v.18 no.1
• /
• pp.13-20
• /
• 2016

Smart Home has achieved remarkable developments over the past few decades. In the ICT(Information and Communications Technology) field, 'app ecosystem'-a collection of multiple devices such as mobile phones and tablets, software (operating system and development tools), companies (manufacturers, carriers, app-stores, etc.) and the process through which data is transferred/shared by a user from one device to another device or by the device itself-has come into wide use since the advent of the smart phone. Due to the synergy effect of the 'app ecosystem', it has been applied to various fields such as televisions and automobile industries. As a result, both the Smart TV and connected vehicle have developed their own ecosystem. Although much research has been conducted on these two ecosystems, there is a lack of research regarding 'App Ecosystem based Smart Home' (AESH). This research focuses on the building scenarios based on 'Tracking, Analyzing, Imaging, Deciding, and Acting (T.A.I.D.A), a future prediction method process. Rather than taking an approach from the perspective of providing and applying advanced technology for research on building future scenarios, this paper focuses on research from the perspective of architectural planning. As a result, two future scenarios of AESH are suggested.

• Journal of Information Processing Systems
• /
• v.17 no.1
• /
• pp.14-27
• /
• 2021

Strong earthquakes have caused substantial losses in recent years, and earthquake risk prevention has aroused a significant amount of attention. Earthquake risk prevention products can help improve the self and mutual-rescue abilities of people, and can create convenient conditions for earthquake relief and reconstruction work. At present, it is difficult for earthquake risk prevention information systems to meet the information requirements of multiple scenarios, as they are highly specialized. Aiming at mitigating this shortcoming, this study investigates and analyzes four user roles (government users, public users, social force users, insurance market users), and summarizes their requirements for earthquake risk prevention products in the whole disaster chain, which comprises three scenarios (pre-quake preparedness, in-quake warning, and post-quake relief). A targeted recommendation rule base is then constructed based on the case analysis method. Considering the user's location, the earthquake magnitude, and the time that has passed since the earthquake occurred, a targeted recommendation model is built. Finally, an Android APP is implemented to realize the developed model. The APP can recommend multi-form earthquake risk prevention products to users according to their requirements under the three scenarios. Taking the 2019 Lushan earthquake as an example, the APP exhibits that the model can transfer real-time information to everyone to reduce the damage caused by an earthquake.

• Journal of Information Technology Services
• /
• v.9 no.2
• /
• pp.163-177
• /
• 2010

In this paper, we consider a channel ordering problem that seeks to maximize the service quality in mobile radio communication systems. If a base station receives a connection request from a mobile user, one of the empty channels belonging to the base station is assigned to the mobile user. In case multiple empty channels are available, we can choose one that incurs least interference with other channels assigned to adjacent base stations. However, note that a pair of channels that are not separated enough generates interference only if both channels are assigned to mobile users. That is, interference between channels may vary depending on the channel assignment sequence for each base station and on the distribution of mobile users. To find a channel assignment sequence that seems to generate minimum interference, we develop an optimization model considering various scenarios of mobile user distribution. Simulation results show that channel assignment sequence determined by the scenario based optimization model significantly reduces the interference provided that scenarios and interference cost are properly generated.

• MALSORI
• /
• no.58
• /
• pp.101-117
• /
• 2006

The development of efficient multimodal interfaces and fusion algorithms requires knowledge of usage patterns that show how people use multiple modalities. We analyzed multimodal usage patterns for TV-guide application scenarios (or tasks). In order to collect usage patterns, we implemented a multimodal usage pattern collection system having two input modalities: speech and touch-gesture. Fifty-four subjects participated in our study. Analysis of the collected usage patterns shows a positive correlation between the task type and multimodal usage patterns. In addition, we analyzed the timing between speech-utterances and their corresponding touch-gestures that shows the touch-gesture occurring time interval relative to the duration of speech utterance. We believe that, for developing efficient multimodal fusion algorithms on an application, the multimodal usage pattern analysis for the given application, similar to our work for TV guide application, have to be done in advance.