• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.7
• /
• pp.918-925
• /
• 2017

Multiple reflections on exterior equipment with complex shape on naval ships cause unexpectedly high Radar Cross Section (RCS) distributions, and the directions of reradiated electromagnetic waves are hard to predict. Therefore, the optimum arrangement of exterior equipments should be considered according to the Radar Absorbing Structure (RAS) method. In this paper, the optimum arrangement for exterior equipments was determined to reduce multiple reflections and RCS even with complex shapes. The sequential descending arrangement method was used to establish an optimum arrangement algorithm. An LCS-2 type model was selected for optimum exterior equipment arrangements. In order to reduce computational cost, RCS distributions and multiple reflection path analysis of exterior equipments was carried out to select exterior equipments for optimum arrangement, and an optimum arrangement was determined to find positions with minimum RCS values. Also, the RCS reduction effect was analyzed using detectable radar range.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.2
• /
• pp.115-124
• /
• 2015

A methodology is proposed to estimate a trajectory of a flying target and its velocity using the time and frequency analysis of the acoustic signal. The measurement of sound emitted from a flying acoustic source with a microphone above a ground shall receive both direct and ground-reflected sound waves. For certain frequency contents, the destructive interference happens in received signal waveform reflected path lengths are in multiple integers of direct path length. This phenomenon is referred to as the acoustical mirror effect and it can be observed in a spectrogram plot. The spectrogram of acoustic measurement for a flying vehicle measurement shows several orders of destructive interference curves. The first or second order of curve is used to find the best approximate path by using nonlinear least-square method. Simulated acoustic signal is generated for the condition of known geometric of a sensor and a source in flight. The estimation based on cepstrogram analysis provides more accurate estimate than spectrogram.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.4
• /
• pp.120-128
• /
• 2012

In this paper, we propose a modified iterative pre-whitening projection statistics (MIPPS) scheme for improving multi-target detection performance in non-homogeneous clutter environments. As a non-homogeneity detection (NHD) technique of space-time adaptive processing algorithm for airborne radar, the MIPPS scheme improves the average detection probability of weak target when multiple targets with different reflection signal intensities are located in close range. Numerical results show that the conventional NHD schemes suffers from the masking effect by strong targets and clutters and the proposed MIPPS scheme outperforms the conventional schemes with respect to the average detection probability of the weak target at low signal-to-clutter ratio.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.1
• /
• pp.37-42
• /
• 2016

PURPOSE. This study investigated the effect of amount of thickness reduction on color and translucency of dental monolithic zirconia ceramics. MATERIALS AND METHODS. One-hundred sixty-five monolithic zirconia specimens ($16.3mm{\times}16.3mm{\times}2.0mm$) were divided into 5 groups (Group I to V) according to the number of A2-coloring liquid applications. Each group was then divided into 11 subgroups by reducing the thickness up to 1.0 mm in 0.1-mm increments (Subgroup 0 to 10, n=3). Colors and spectral distributions were measured according to CIELAB on a reflection spectrophotometer. All measurements were performed on five different areas of each specimen. Color difference (${\Delta}E^*{^_{ab}}$) and translucency parameter (TP) were calculated. Data were analyzed using one-way ANOVA and multiple comparison $Scheff{\acute{e}}$ test (${\alpha}=.05$). RESULTS. There were significant differences in CIE $L^*$ between Subgroup 0 and other subgroups in all groups. CIE $a^*$ increased (0.52<$R^2$<0.73), while CIE $b^*$ decreased (0.00<$R^2$<0.74) in all groups with increasing thickness reduction. Perceptible color differences (${\Delta}E^*{^_{ab}}$>3.7) were obtained between Subgroup 0 and other subgroups. TP values generally increased as the thickness reduction increased in all groups ($R^2$>0.89, P<.001). CONCLUSION. Increasing thickness reduction reduces lightness and increases a reddish, bluish appearance, and translucency of monolithic zirconia ceramics.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.669-669
• /
• 2013

Hierarchical N doped TiO2 nanostructured catalyst with micro, meso and macro porosity have been synthesized by a facile self-formation route using ammonia and titanium isopropoxide precursor. The samples were calcined in different calcination temperature ranging from $300^{\circ}C$ to $800^{\circ}C$ at slow heating rate ($5^{\circ}C$/min) and designated as NHPT-300 to NHPT-800. $TiO_2$ nanostructured catalyst have been characterized by physico-chemical and spectroscopy methods to explore the structural, electronic and optical properties. UV-Vis diffuse reflectance spectra confirmed the red shift and band gap narrowing due to the doping of N species in TiO2 nanoporous catalyst. Hierarchical macro porosity with fibrous channel patterning was observed (confirmed from FESEM) and well preserved even after calcination at $800^{\circ}C$, indicating the thermal stability. BET results showed that micro and mesoporosity was lost after $500^{\circ}C$ calcination. The photocatalytic activity has been evaluated for methanol oxidation to formaldehyde in visible light. The enhanced photocatalytic activity is attributed to combined synergetic effect of N doping for visible light absorption, micro and mesoporosity for increase of effective surface area and light harvestation, and hierarchical macroporous fibrous structure for multiple reflection and effective charge transfer.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.6
• /
• pp.52-60
• /
• 1999

Fabricability of phase shifted grating filters has been theoretically studied by an effective index transfer matrix method. In the optical band-pass filter with multiple ${\lambda}/4$ phase-shifts, the phase-shift error and random variation of the grating period should be suppressed such that corresponding resonance frequency lies within, the filter pass-band. The tolerance for the relative error is less than $10^3$, and is quite stringent in typical filters for WDM application. End facet reflection produces ripple in the transmission spectra and the reflectivity should be less than 1% in order to keep the ripple less than 0.25dB. Also, the effect of waveguide absorption loss is enhanced by the resonance in the filter, and the absorption should be limited to 1dB/cm for the signal loss of less than 0.2dB.

• Journal of Oral Medicine and Pain
• /
• v.30 no.1
• /
• pp.35-44
• /
• 2005

Purpose: The aim of this preliminary study was to evaluate the effect of Problem-Based Learning (PBL) curriculum on development of comprehension of basic medical knowledge and quality of semi-structured problem solving including scientific reasoning skill. This scientific reasoning contained five components including: size of simple, design of research cause-effect, construction of risk factor, analysis statistic of data, interpretation of result. Materials and Methods: Seoul National University Dental students (100) participated in this experience during two weeks, 2004. Forty eight multiple-choice questions (MCQ) concerned "Infection Control and Prevention" were asked before and after two sections of Lecture-Based Learning (LBL) and PBL (pretest-posttest control group design). A semi-structured problem in epidemiological research was asked to these students after two sections (posttest-only control group design). Data (mean and SD) were analysed using the t Test for two independent samples (p<.05), comparing PBL versus LBL. Results: Our analyse of scores show no difference between LBL and PBL in the development of comprehension of "Infection Control and Prevention". The quality problem solving (epidemiological research) was significantly different between the two groups (p=.029); specially, two components' scores of reflection on scientific reasoning cause-effect (p=.000) and interpretation of result (p=.001) were significantly better for PBL than for LBL. Conclusion: Theses results indicate that comparing LBL and PBL, PBL curriculum have not been disadvantaged in comprehension of basic knowledge, and have contributed to develop the scientific reasoning in problem solving.

• Asia-Pacific Journal of Business
• /
• v.6 no.2
• /
• pp.81-95
• /
• 2015

This study is an investigative study into the effects that the 'travel motivations' of participants on walking tourism has on their 'degree of satisfaction' by identifying tourist motivations for selecting walking tour among many types of tourism and their effects on hikers' degree of satisfaction. This study was conducted with hikers affiliated with 'walking on beautiful roads '-one of Busan's preliminary social enterprises- with a total of 176 copies used for a final effective sample. Data collected was analyzed using SPSS WIN 18.0 to conduct a frequency analysis of the sample. Along with exploratory factor analysis, Cronbach's ${\alpha}$ coefficient was used as an estimate of the validity and reliability of each factor. Multiple regression analysis was done for an analysis of travel motivations and their effects on satisfaction. The scale rates items in the questionnaire in the following categories: 'Motivations' for walking tours consist of 5 factors- vacation, soul-searching, social get-togethers, nature tour, community experience-with a total of 20 items. 'The degree of satisfaction' is made up of a factor with a total of 4 items. The results of the study are as follows: with respect to the hypothesis that motivations for walking tour would have a positive effect on the degree of satisfaction, test results show that 'motivations' have significant partial effects on the 'degree of satisfaction'. Motivations affect the degree of satisfaction in the order of nature tour and soul-searching except for experience and social get-togethers- an indication that participants on walking tours tend to travel for the attractiveness of nature, wanting time for reflection and meditation. As the first investigative study into participants in walking tours products offered by travel agencies, the study has the following implications for marketers: First, travel agencies selling walking tour products and government institutions concerned about the development of hiking trails need to discuss ways to make the most of natural resources as they are- rather than using development-oriented approaches. The study has its own limitation: it is that with the lack of domestic and international studies on walking tours, the study has not gained access to precedent studies on the subject so it has not established a systemic approach to the emerging type of tourism. Hopefully, this study will make a small contribution to its development.

• Geophysics and Geophysical Exploration
• /
• v.13 no.1
• /
• pp.1-8
• /
• 2010

Seismic reflection surveying is one of the most widely used and effective techniques for coal seam structure delineation and risk mitigation for underground longwall mining. However, the ability of the method can be compromised by the presence of volcanic cover. This problem arises within parts of the Bowen and Sydney Basins of Australia and seismic surveying can be unsuccessful. As a consequence, such areas are less attractive for coal mining. Techniques to improve the success of seismic surveying over basalt flows are needed. In this paper, we use elastic wave-equation-based forward modelling techniques to investigate the effects and characteristics of seismic wave propagation under different settings involving changes in basalt properties, its thickness, lateral extent, relative position to the shot position and various forms of inhomogeneity. The modelling results suggests that: 1) basalts with high impedance contrasts and multiple flows generate strong multiples and weak reflectors; 2) thin basalts have less effect than thick basalts; 3) partial basalt cover has less effect than full basalt cover; 4) low frequency seismic waves (especially at large offsets) have better penetration through the basalt than high frequency waves; and 5) the deeper the coal seams are below basalts of limited extent, the less influence the basalts will have on the wave propagation. In addition to providing insights into the issues that arise when seismic surveying under basalts, these observations suggest that careful management of seismic noise and the acquisition of long-offset seismic data with low-frequency geophones have the potential to improve the seismic results.