• The Journal of Advanced Prosthodontics
• /
• v.5 no.1
• /
• pp.51-57
• /
• 2013

PURPOSE. The purpose of this study was to to analyze the effect of Type 2 diabetes on tooth mortality, implant treatment and prosthetic status. MATERIALS AND METHODS. 275 Type 2 diabetics and 300 non-diabetics, aged 40-80 years were selected for analysis. The assessment of number of teeth, missing teeth, fixed prostheses (bridge pontics), implants using panoramic radiographs and dental records were carried out. RESULTS. Diabetes mellitus (DM) patients had a higher number of missing teeth (P<.05) and placed implants (P=.074), age (P<.05), male gender percentage (P=.042), smoker percentage (P<.05) than non-DM patients. In univariate analysis, the patients in older group showed significantly higher number of tooth loss rate at the first dental examination than the patients in younger group. Tooth loss rate of smokers did not show higher value than that of non-smokers. When multiple variables including DM, age, smoking, gender were considered together, diabetics and older group patients showed significantly higher tooth loss rate at the first dental examination than non-diabetics and younger group patients, respectively. Smokers and male group did not show a significant difference than nonsmokers and female group, respectively. CONCLUSION. Tooth mortality and implant treatment rate were significantly higher in the DM group as indicated by univariate and multivariate logistic regression analysis. Old age groups showed significantly higher odds ratios and tooth loss rate. As diabetics showed the higher tooth loss rate than non-diabetics, diabetics also had more implant restorations than non-diabetics.

• Journal of Periodontal and Implant Science
• /
• v.51 no.2
• /
• pp.135-143
• /
• 2021

Purpose: To investigate factors affecting the antagonistic and adjacent teeth in patients after implant restoration and prosthetic rehabilitation. Methods: In total, 160 patients who visited Kyungpook National University Dental Hospital for implant surgery, prosthesis placement, and supportive periodontal therapy (SPT) were included in this study. The average follow-up period was 88.06 months, and the maximum was 175 months. Patients' history of smoking, diabetes, hypertension, and osteoporosis was investigated, and panoramic radiographs were taken after surgery and prosthetic treatment. During the follow-up period, extraction and prosthetic/endodontic treatments of the antagonistic and adjacent teeth were analyzed. The statistical analyses were performed using descriptive statistics, the chi-square test, the Fisher exact test, and multiple logistic regression analyses. Results: Treatment was performed on 29.4% of the studied antagonistic teeth with extraction performed in 20.0% and prosthetic treatment in 10.0%. Furthermore, 19.4% of the studied adjacent teeth underwent treatment, of which extraction was performed in 12.5% and prosthetic treatment in 7.5%. The treatment rate for adjacent teeth was 25.3% in smokers, which was higher than that of non-smokers (12.3%) (P=0.039). Patients who were non-adherent to SPT showed a significantly higher rate (19.6%) of antagonistic prosthetic treatment than did those who were adherent (5.5%) (P=0.006). Conclusions: Implant restoration can affect the adjacent and antagonistic teeth. Smoking, osteoporosis history, and absence of SPT may be risk factors for the treatment of the adjacent and antagonistic teeth.

• Imaging Science in Dentistry
• /
• v.52 no.2
• /
• pp.197-207
• /
• 2022

Purpose: This study evaluated the associations of the dental arch form, age-sex groups, and sagittal root position (SRP) with alveolar bone thickness of the maxillary central incisors using cone-beam computed tomography (CBCT) images. Materials and Methods: CBCT images of 280 patients were categorized based on the dental arch form and age-sex groups. From these patients, 560 sagittal CBCT images of the maxillary central incisors were examined to measure the labial and palatal bone thickness at the apex level and the palatal bone at the mid-root level, according to the SRP classification. The chi-square test, Kruskal-Wallis test, and multiple linear regression were used for statistical analyses. Results: Significant differences were found in alveolar bone thickness depending on the arch form and SRP at the apex level. The square dental arch form and class I SRP showed the highest bone thickness at both levels of the palatal aspect. The taper dental arch form and class II SRP presented the highest bone thickness at the apex level of the labial aspect. No association was found between the dental arch form and SRP. Elderly women showed a significant association with thinner alveolar bone. Age-sex group, the dental arch form, and SRP had significant associations with alveolar bone thickness at the apex level. Conclusion: The patient's age-sex group, dental arch form, and SRP were associated with alveolar bone thickness around the maxillary central incisors with varying magnitudes. Therefore, clinicians should take these factors into account when planning immediate implant placement.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.1
• /
• pp.63-72
• /
• 2023

When oral restoration is performed with a full mouth implant-supported fixed restoration in an edentulous patient, it is very important to determine the shape and position of the definitive prosthesis in consideration of the anatomical state and the relationship with the antagonist, and the process of placing multiple implants in the planned direction and angle is very important. In this case, implants were ideally planned based on an upper prosthesis through a computer-guided surgical procedure for an edentulous maxillary patient who visited due to discomfort in the existing denture. Through this, we would like to report this because we obtained satisfactory functional and esthetic results for both the patient and the operator with the treatment of oral restoration by manufacturing a fixed prosthesis for maxillary and full jaw implants.

• Journal of dental hygiene science
• /
• v.14 no.3
• /
• pp.411-416
• /
• 2014

The purpose of this study was to examine the effects of conscious sedation on pain and anxiety of patients in implant surgery. A total of 95 patients who underwent implant surgery were included in the study. In this study, the patient's anxiety and pain to evaluate the pre-operative Visual Analogue Scale (VAS), during-operative Pain Question (PQ), post-operative (Short-form McGill Pain Questionnaire [SF-MPQ], VAS) was used for tools such as questionnaires. The data were analyzed using the chi-squire, independent-samples t-test, multiple linear regression analysis. As a result, the pain reduction was significantly different between the sedative dental treatment and non-sedative dental treatment (p<0.05). The finding of the study multiple linear regression analysis showed that operation time, implant surgery experience, gender, age, operation form and Pain Catastrophizing Scale (PCS) with factors that affect the pain and anxiety (p<0.05). According to the results of the study, considered to be necessary to develop intervention strategies effective using the PCS when managing pain and anxiety of behavior management of this implant patient. Thus, it is advised to provide necessary practical guidelines and dental utilization behaviors on patients with conscious sedation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.3
• /
• pp.468-482
• /
• 1998

Since the concept of osseointegration was introduced by Branemark of Sweden, dental implants have been used for various dental prosthetic treatments. The survival rate of dental implant is likely to be closely related to the total biomechanical role of each component of implant system. The use of interchangeable component is very attractive for dental practitioners because such an approach would save treatment cost, flexibility of prosthetic treatment options as well as conveniences. Therefore, the use of interchangeable implant system has been increasing without scientific assessment of safety and efficacy of various interchangeable implant system. The purpose of this study, therefore, were to compare the geometric characteristic of four interchangeable dental implant screws and the loosening torque of these screws. Four types of dental implant screws tested in this study were Nobelpharma, 3i, Impla-med, Restore. Four screws each of the test specimens were subjected for scanning electron microscopic examinations under the same condition and a 35x magnified standard SEM picture was objected from each test specimen using JSM-5200 scanning microscope. From each of the SEM pictures, eight parameters. i.e., diameter of screw head. screw length, thread pitch, major diameter. neck diameter, neck length, crest width and root width were determined using a caliper. The measurement for each parameters were then corrected for their magnification factor. The loosening torque were also determined by using a torque gauge. All of the measurements were statistically analyzed by ANOVA test and multiple range test. Statistical significance was set in advance at the probability level of less than 0.05. All analyses were done with SPSS software for the personal computer. The conclusion obtained from this studies were summarized as the following; 1. No statistically significances were noted in the thread pitch. and crest width in the four screws, and in the case of major diameter, the Impla-med screw was significantly smaller than the other three screws (p<0.05). Therefore, four implant bolts could be physically inserted in a abutment nuts. 2. The diameter of screw head was decreased in the order of Restore, 3i, Nobelpharma, Impla-med screws and the length of screws were decreased in the order of 3i, Restore, Nobelpharma and Impla-med. The diameter of neck was decreased in the order of Impla-med, Restore. Nobelpharma, 3i screws. The differences of each of these parameters were statistically significant (p<0.05). The width of root of screws were decreased in the order of Nobelpharma, Impla-med, Restore and 3i. The differences among Nobelpharma and Impla-med. Restore and 3i were statistically significant (p<0.05). 3. When the screws were loosening 1, 3, 4 and 5 times, the loosening torque for Impla-med and 3i screws were significantly higher than that of Nobelpharma or Restore screws (p<0.05). However, when statistically smaller than that of 3i, Restore or Nobelpharma screws(p<0.05).

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.4
• /
• pp.425-442
• /
• 2004

Statement of problem: A difficulty in achieving a passive-fitting prosthesis can be overcome by individual crown restoation of multiple implants. But individualized crown has another difficulty in control of contact tightness and stress distribution. Purpose: This in vitro study is to evaluate the stress distribution and the magnitude in the supporting tissues around Endopore implants with different crown lengths, interproximal contact tightness, and the splinting effects. Material & methods: Three Endopore implants($4.1{\times}9mm$) were placed in the mandibular posterior edentulous area distal to the canine and photoelastic model was made with PL-2 resin(Measurements Group, Raleigh, USA). Restorations were fabricated in two crown lengths: 9, 13 mm. For non-splinted restorations, individual crowns were fabricated on three custom-milled titanium abutments. After the units were cemented, 4 levels of interproximal contact tightness were evaluated: open, ideal($8{\mu}m$ shim stock drags without tearing), medium($40{\mu}m$), and heavy($80{\mu}m$). For splinted restorations, 3-unit fixed partial dentures were fabricated. This study was examined under simulated non-loaded and loaded conditions(6.8 kg). Photoelastic stress analysis was carried out to measure the fringe order around the implant supporting structure. Results: 1. When restorations were not splinted, the more interproximal contact tightness was increased among the three implants, the more stress was shown in the cervical region of each implant. When crown length was increased, stresses tended to increase in the apex of implants but there were little differences in stress fringes. 2. When nonsplinted restorations were loaded on the first or third implant, stresses were increased in the apex and cervical region of loaded implant. Regardless of interproximal contact tightness level, stresses were not distributed among the three implants. But with tighter interproximal contact, stresses were increased in the cervical region of loaded first or third implant. 3. When the nonsplinted restorations were not loaded, there were little stresses on the supporting structure of implants, but low level stresses were shown in the splinted restorations even after sectioning and soldering. 4. With splinted restorations, there were little differences in stresses between different crown lengths. When splinted restorations were loaded, stresses were increased slightly on the loaded implant, but relatively even stress distribution occurred among the three implants. Conclusions: Splinting the crowns of adjacent implants is recommended for Endopore implants under the overloading situation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.3
• /
• pp.228-233
• /
• 2015

Loss of teeth may not only imply impaired oral function and loss of alveolar bone but is also often accompanied by reduced self-confidence. This results in a larger problem with the fully edentulous patient. The patient introduced in this study showed multiple missing teeth and mobility of remaining teeth and wanted to have fixed dental prosthesis using implants. Remaining teeth were extracted because of periodontally bad prognosis. This article reports a satisfactory clinical and esthetic outcome of full mouth rehabilitation using implant hybrid prosthesis in fully edentulous patient.

• Journal of Korean society of Dental Hygiene
• /
• v.22 no.5
• /
• pp.401-410
• /
• 2022

Objectives: This study aims to provide data that will improve the scope of national health insurance coverage by surveying the awareness of health insurance benefits, specifically for implants and dentures, among dental workers. Methods: Information was collected through questionnaires completed by 194 dental workers at dental hospitals and clinics. The multiple logistic regression analysis was conducted to confirm influential factors in recognizing the health insurance benefits application for dentures and implants. Results: Regarding the awareness about the validity of health insurance benefits, satisfaction with the appropriateness on the subjects of the denture application and implant application are appeared to be high with each 3.369 and 3.673. Regarding satisfaction with the appropriateness of free post-maintenance for implants, the awareness level regarding the validity of health insurance benefits was indicated as high at 3.673. Conclusions: The categories and levels of appropriate insurance benefits must be restructured continuously.

• The Journal of Advanced Prosthodontics
• /
• v.3 no.1
• /
• pp.37-42
• /
• 2011

Partial edentulism has multiple implications in relation to function, esthetics and future rehabilitative treatment. This case report illustrates the management of a patient with extreme consequences of partial edentulism. The main clinical findings were unopposed remaining teeth, overeruption of the remaining teeth, loss of vertical dimension of occlusion, and significant disfigurement of the occlusal plane. Following the diagnostic procedure, a well-coordinated prosthodontic treatment involving liaison with other dental disciplines was indicated. The management involved an innovative combination of fixed and removable prostheses in conjunction with crown lengthening surgery and strategic implant placement. Series of provisional prostheses were applied to facilitate the transition to the final treatment.