• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.2
• /
• pp.76-93
• /
• 2013

The hydrodynamics in the Youngsan River Estuary has changed due to coastal developments such as the estuary dam and two tidal barriers. As the freshwater discharge is artificially controlled, the circulation pattern is different from those of natural estuaries and the river-born sediment supply is restricted. 3D numerical modeling system EFDC was applied to investigate the sediment transport pattern and budget in summer with river floods. The real-time driving forces and the fluvial sediment discharges from the watershed modeling were assigned for the simulation period. The size classes of sand, silt and clay were adopted based on the grain-size distribution of bottom sediments. The modeling results were calibrated and validated with the observed tides, tidal currents and suspended sediment concentrations. The suspended sediments are transported to the offshore at surface layer, whereas upstream toward the dam at mid- and bottom layers in August 2011. The characteristic estuarine circulation induced by the freshwater discharge from the dam, causes the deposition of silt-sized sediments on the whole and the sustained suspension of clay-sized sediments.

• Korean Journal of Materials Research
• /
• v.2 no.1
• /
• pp.65-75
• /
• 1992

0.4wt%C steel added with V and/or Nb were forged and followed by air cooling. The structure-property relationships were examined and multiple regression analysis was conducted to quantify the magnitudes of effects of microalloying elements on the properties of the steels. All material's tensile strength are greater than $70kg/\textrm{mm}^2$, so they are equal to or superior to Q/T material's(S45C). Their impact energies are less than 40J, so they are 50% of Q/T material's. Increasing the content of V from 0.10 to 0.15 wt% had brought improvement in UTS about 20% but with some sacrifice of impact energy. These were the results from the precipitation strengthening by fine dispersion of VC in ferrite, increment of pearlite volume fraction and decrement of pearlite interlamellar spacings. However, increasing the content of Nb from 0.05 to 0.l0wt % slightly improved UTS and impact energy. NbC precipitates were more effective in suppression of austenite grain coarsening than VC precipitates. Combined additions of V+Nb were more effective to bring impact toughness than sole addition. Optimum combination of strength and toughness was accomplished wish 0.4C-1. 19Mn-0.05S-0.12V-0.07Nb steel.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.20 no.1
• /
• pp.4575-4591
• /
• 1978

In order to investigate the effects of grain size distribution, cement content, and molding pressure on the strength and durability of soil-cement mixtures, a laboratory test of soil cement mixtures was performed at four levels of cement content, five levels of molding pressure, and four levels of normal curing periods. The results are summarized as follows: 1. Optimum moisture contents in loam soil and maximum dry density in sand soil increased with the increase of cement content, but in others, both optimum moisture contents and maximum dry density were changed ununiformly. 2. When the specimens were molded with molding pressure, 50kg/$\textrm{cm}^2$, strength of soil cement mixture with cement content, 2 and 4 per cent, was lower than the strength of soil cement mixture without cement content by more than 40 to 50 per cent. 3. The strength of soil-cement molded with molding pressure, 100kg/$\textrm{cm}^2$, was higher than the strength of soil-cement molded with M.D.D. obtained from standard compaction test more than 40 per cent in sand loam cement and 50 per cent in loamy cement. 4. There was highly significant positive correlation among molding pressure, cement content and unconfined compressive strentgh and so the following multiple regression equations were obtained. Loam: fc=1.9693C+0.197P-0.84 Sandy loam: fc=2.9065C+0.235P-0.77 5. When the specimens were molded with molding pressure, 20 to 100kg/$\textrm{cm}^2$, the regression equation between the 28-day and 7-day strenght was obtained as follows. Loam : q28=1.1050q7+7.59(r=0.9147) Sandy loam : q28=1.3905q7+3.17 (r=0.9801) 6. At the cement contents of above 50 per cent, the weight losses by freeeze-thaw test were negligible. At the cement content of below 8 per cent the weight losses were singnificantly high under low molding pressure and remarkably decreased with the increase of molding pressure up to 80kg/$\textrm{cm}^2$. 7. Resistance to damage from water and to absorption of water were not improved by molding pressure alone, but when the soil was mixtured with cement above 6 per cent, damage seldoms occurred and absorbed less than 5 per cent of water. 8. There was highly significant inverse-corelationship between the compressive strength of soil cement mixtures and their freeze-thaw loss as well as water absorption. By the regression equation methods, the relationships between them were expessed as followed fc=-7.3206Wa+115.6(r=0.9871) log fc=-0.0174L+1.59(r=0.7709) where fc=unconfined compressive stregth after 28-days curing. kg/$\textrm{cm}^2$ Wa=water absorption, % L : freeze-thaw loss rate, %

• Korean Journal of Materials Research
• /
• v.2 no.6
• /
• pp.452-460
• /
• 1992

Effects of the microalloyed elements, temperatures and cooling rates on the strength and toughness of the medium carbon microalloyed hot forging steels obtained by air cooling(A.C.) method and the low carbon microalloyed forging steels by direct quenching(D.Q.) method were investigated. Combined additions of V+Nb produced the optimum combination of strength and toughness with ferrite-pearlite structure of the medium carbon steel by the A.C. method. 831MPa in UTS and 52.1J in toughness were obtained for 0.40c+0.12V+0.07Nb. It was martensite structure for the low carbon steel by the D.Q. method. The highest UTS and toughness obtained by Mo additions were 855MPa and 108j by 0.12C+0.10V+0.03Nb+1.13Mo respectively. Especially, the toughness of the low carbon steel was twice better than that of the medium carbon steel. 110$0^{\circ}C$was more appropriate than 120$0^{\circ}C$ for the reheating and forging temperature and 1.$2^{\circ}C$ /s was the best cooling rate from the viewpoint of the strength and toughness. Multiple regression analysis was used to quantify the influence of the microalloyed elements, temperatures and cooling rates on the strength, toughness, austenite grain size, and the pearlite interlamellar spacing.

• Journal of Food Hygiene and Safety
• /
• v.25 no.4
• /
• pp.281-288
• /
• 2010

Total aflatoxin ($B_1+B_2+G_1+G_2$) maximum levels of 15 ${\mu}g/kg$ ($B_1=10\;{\mu}g/kg$) were set for grain, beans, peanut, nuts & their processed food (grinding, cutting etc.), processed cereal product & processed bean product, confectionaries (peanut or nut-containing food), soybean paste, red pepper paste, dried red pepper, processed com products for popcorn and steamed rice. The maximum levels for aflatoxin $M_1$ are 0.5 ${\mu}g/kg$ for raw milk and milks before manufacturing processing. The patulin maximum level is 50 ${\mu}g/kg$ in apple juice and apple juice concentrate (including concentrate to use as raw material and converted by concentration multiple). The ochratoxin A is managed at the maximum levels of 5 ${\mu}g/kg$ in wheat, barley, rye, coffee beans and roasted coffee, 10 ${\mu}g/kg$ in instant coffee and raisin, 2 ${\mu}g/kg$ in Grape juice, concentrated grape juice as reconstituted and wine. The fumonisins ($B_1+B_2$) maximum levels are 4000 ${\mu}g/kg$ in com, 2000 ${\mu}g/kg$ in com processed food (grinding, cutting etc.) and com powder, 1000 ${\mu}g/kg$ in processed com products. Standards for mycotoxins in food have been established and the mycotoxin risk in food is managed reasonably and scientifically, based on risk assessment and exposure analysis.

• Economic and Environmental Geology
• /
• v.35 no.3
• /
• pp.191-201
• /
• 2002

The Gubong gold-silver deposits if gold-silver-bearing hydrothermal massive quartz veins which were filled the fractures along fault shear (NE, NW) zones within Precambrian banded or granitic gneiss of Gyeonggi massif. Ore mineralization of this deposits is contained within a single stage of quartz vein which was formed by multiple episodes of fracturing and healing. Ore minerals are comported mainly of arsenopyrite, pyrite, sphalerite, chalcopyrite, galena with minor amounts of pyrrhotite, marcasite and electrum. The frequency and volume percentages of electrum associated with ore minerals from this deposits are recognized as follows; 44.5% and 54.3% with arsenopyrite, 24.3% and 33.8% with quartz, 12.6% and 0.1% with pyrite, 11.0% and 4.8% with galena, 5.0% and 7.0% with sphalerite and 2.5% and 0.02% with chalcopyrite, respectively. They show irregular (41.6%), subround (34.7%), elongate (17.0%) and granular (6.6%) shapes, respectively. Their grain size ranges from 2 to 150 um, but 90.9 percent of the grains are below 30 um. The chemical composition of electrums ranges from 26.39 to 72.51 Au atomic %. These composition (Au atomic %) on the basis of associated minerals are from 44.97 to 71.75 with arsenopyrite, pyrite, sphalerite and quartz, from 44.37 to 72.51 with quartz, from 35.40 to 41.01 with sphalerite and chalcopyrite, from 26.39 to 54.84 with pyrite, chalcopyrite, quartz and galena, from 28.49 to 53.28 with galena, respectively. We suggest that optimum recovery of gold would be obtained with reference to these results.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.2
• /
• pp.113-118
• /
• 2013

The current GPU virtualization techniques incur large overheads when executing application programs mainly due to the fine-grain time-sharing scheduling of the GPU among multiple Virtual Machines (VMs). Besides, the current techniques lack of portability, because they include the APIs for the GPU computations in the VM monitor. In this paper, we propose a low overhead and high performance GPU virtualization approach on a heterogeneous HPC system based on the open-source Xen. Our proposed techniques are tailored to the bio applications. In our virtualization framework, we allow a VM to solely occupy a GPU once the VM is assigned a GPU instead of relying on the time-sharing the GPU. This improves the performance of the applications and the utilization of the GPUs. Our techniques also allow a direct pass-through to the GPU by using the IOMMU virtualization features embedded in the hardware for the high portability. Experimental studies using microbiology genome analysis applications show that our proposed techniques based on the direct pass-through significantly reduce the overheads compared with the previous Domain0 based approaches. Furthermore, our approach closely matches the performance for the applications to the bare machine or rather improves the performance.

• Korean Journal of Breeding Science
• /
• v.40 no.3
• /
• pp.295-298
• /
• 2008

"Dongjin2" is a new japonica rice cultivar developed from the cross between Milyang165 with short culm and lodging resistance and $F_1$ plant of Iksan438, HR14018-B-1-1 and Iksan435 with high palatability at Honam Agricultural Research Institute (HARI), NICS, RDA in 2005. This cultivar has short grain shape and about 143 days growth duration from direct seeding to harvesting under Korean climate condition. The milled kernels of "Dongjin2" is translucent with non-glutinous endosperm. It has about 19.3% of amylose content and better palatability of cooked rice compared with "Nampyeongbyeo". This cultivar shows high resistance reaction to the bacterial blight pathogene race from $K_1$ to $K_3$, blast and stripe virus but susceptible to insect pests. "Dongjin2" yields about 5.71 and 5.74 MT/ha under the wet direct seeding and the transplanting at standard fertilizer level. "Dongjin2" would be adaptable for the southern plain area of Korea.

• Korean Journal of Breeding Science
• /
• v.40 no.4
• /
• pp.452-455
• /
• 2008

"Baegseolchal" is a new Japonica type waxi rice variety developed and registered by the rice breeding team of Department of Rice and Winter Cereal Crop, NICS, RDA in 2007. This variety was derived from a across between Iksan435 which is highly tolerant to lodging and high yield potential, and Iksan425 which is resistance to multiple diseases. This variety has about 120 days of growth duration from transplanting to harvesting in middle, Honam and Youngnam plain of Korea. It is about 80 cm in culm length and tolerant to lodging. It is moderately resistant to blast, and resistance to bacterial blight pathogen races from $K_1$ to $K_3$, but susceptible to other major diseases and insect pests. "Baegseolchal" is midium-short grain and the milled rice exhibits high whiteness. The milled rice yield was about 5.37 MT/ha in local adaptability test for three years. "Baegseolchal" would be adaptable to plain areas south of the Chungnam Province of Korea.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.92-92
• /
• 2022

In preparation for the ever-changing climate and unification of North Korea and South Korea, it is necessary to increase the grain self-sufficiency rate by selecting crops with good utilization in high-altitude regions. The principle is to sow pastures at the end of August. However, sowing occurs in spring because the sowing period is missed when the weather is bad or when the workforce is insufficient. Sometimes when the grassland is completely devastated, it is frequently sowed in spring. In addition, North Korea consists of a high-altitude regions, and has been devastated in a general mountainous region. As a result, the landscape is not good and it is vulnerable to natural disasters such as landslides. Therefore, to prevent this, pasture must be sowed in the high-altitude regions. The goal of this study was to evaluate and compare yield and feed value of pasture species and varieties by spring sowing in high-latitude regions. The study was conducted in Pyeongchang, Gangwon-do, which is 700m height above sea level. The pasture species and varieties was sown on April 24, 2022. Each treatment was carried out by sowing 30 kg/ha, the experiment field size was 1 m²(1m×1m), and randomized block design with tri-repeat. The total of 14 varieties was used in the study, 6 varieties of Orchardgrass (OG), 6 varieties of Tall fescue (TF) and 2 varieties of Perennial ryegrass (PRG). The grassland composition fertilization using (N:P₂O₅:K₂O at 80:200:70 kg/ha) was conducted and management fertilizer was N:P₂O₅:K₂O at 210:150:180 kg/ha. The first harvest was June 26,2022 and the second harvest was on August 16, 2022. For statistical analysis of the data, an Analysis of Variance (ANOVA) was performed using the R3.6.3 software program, and all data was subjected to analysis using Duncan's multiple range test. Significance was set at the 5% level. The dry matter yield at the first harvest was the highest in PRG, and second harvest was the highest in TF (p < 0.05). Overall, PRG showed a trend of gradually decreasing growth, OG and TF showed a trend of gradually improving growth. This showed that PRG was considerably weaker to summer depression than other pasture species. Comparing the total dry matter yield, TF was the highest (4,565.45 kg/ha), but there was no significance difference with PRG (4,487.24 kg/ha) (p < 0.05). In addition, comparing the total TDN (total digestible nutrient) yield, TF was the highest (3147.33 kg/ha), second in PRG (2975.67 kg/ha) and third in OG (2052.33 kg/ha). Since this result is the data of the second harvests, if the result is derived by the end of next year, it will be provided as basic data for selection of pasture species and varieties suitable for spring seeding in high-altitude regions.