• 한국농공학회지
• /
• 제39권2호
• /
• pp.9-18
• /
• 1997

Abstract This paper presents a heuristic method for optimal design of water distribution system with multiple sources and potential links. In multiple source pipe network, supply rate at each source node affects the total cost of the system because supply rates are not uniquely determined. The Linear Minimum Cost Flow (LMCF) model may be used to a large scale pipe network with multiple sources to determine supply rate at each source node. In this study the heuristic method based on the LMCF is suggested to determine supply rate at each source node and then to optimize the given layout. The heuristic method in turn perturbs links in the longest path of the network to obtain the supply rates which make the optimal design of the pipe network. Once the best tree network is obtained, the frequency count of reconnecting links by considering link failure is in turn applied to form loop to enhance the reliability of the best tree network. A sample pipe network is employed to test the proposed method. The results show that the proposed method can yield a lower cost design than the LMCF alone and that the proposed method can be efficiently used to design irrigation systems or rural water distribution systems.

• 한국멀티미디어학회논문지
• /
• 제3권3호
• /
• pp.272-279
• /
• 2000

다수의 영상 신호원들이 제한된 대역을 갖는 전송로를 통하여 동시에 전송되는 경우에 결합 대역할당방법이 필요하다. 본 논문은 영상 신호원들 사이에 일정한 화질 비율을 제공해 주기위한 결합 대역할당 방법을 제안한다. 먼저, 다수의 영상신호원의 다중화 시스템에서 왜곡과 부호화율 사이 의 근사화된 모델을 제시한다. 그리고나서, 간단한 구현을 위해서 근사화된 모델변수들을 사용하여 신호원들간 일정 왜곡비율을 갖도록 각 신호원에 부호화율을 할당한다. 실험결과로부터 기존의 독립적인 부호화율 제어방법에 비해서 제안된 부호화율 제어방법이 영상들 사이에서 거의 일정한 화질비율을 유지시켜줌을 보인다

• 소음진동
• /
• 제9권5호
• /
• pp.922-927
• /
• 1999

The objective of this paper is to obtain the contribution of each source to the spectrum of pressure, when there are multiple incoherent sources in near-field acoustic holography. For this objective, we have to obtain signals very coherent to the input signals of the sources. To obtain the very coherent signals, many people have measured pressure signals in the vincinity of the sources. However, it is sometimes difficult to locate microphones near to the sources so that the signals are very coherent to the input signals. This paper proposed a method to obtain the very coherent signals by near-field acoustic holography. Therefore, the proposed method does not require the measurement of pressure near to each source. Simulation results for two incoherent monopole sources showed the possibility of the proposed method.

• 정보보호학회논문지
• /
• 제30권6호
• /
• pp.1247-1254
• /
• 2020

스마트홈 시대가 도래하면서 실생활의 다양한 곳에 기밀성을 제공하거나 인증을 수행하는 장비들이 존재하게 되었다. 이에 따라 암호화 장비 및 인증 장비에 물리적인 공격으로부터의 안전성이 요구되고 있다. 특히 외부에서 인위적으로 오류를 주입하여 비밀 키를 복구하거나 인증 과정을 우회하는 오류 주입 공격은 매우 위협적인 공격 방법의 하나다. 오류 주입 공격에 사용되는 오류원은 레이저, 전자파, 전압 글리치, 클락 글리치 등이 있다. 오류 주입 공격은 오류가 주입되는 횟수에 따라 단일 오류 주입 공격과 다중 오류 주입 공격으로 분류된다. 기존의 다중 오류 주입 시스템은 일반적으로 단일 오류원을 사용하였다. 단일 오류원을 여러 차례 주입하도록 구성된 시스템은 물리적인 지연 시간이 존재한다는 점과 추가적인 장비가 필요하다는 단점이 존재한다. 본 논문에서는 이종(異種) 오류원을 사용하는 다중 오류 주입 시스템을 제안한다. 그리고 제안하는 시스템의 효용성을 보이기 위해 Riscure사의 Piñata 보드를 대상으로 다중 오류 주입 공격을 수행한 결과를 보인다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.490-495
• /
• 2009

An approach to 3D visualization of multiple sound sources has been developed with the application of a moving array technique. Frequency-domain beamforming algorithm is used to generate a beam power map and the sound source is modeled as a point source. When a conventional delay and sum beamformer is used, it is considered that 2D distribution of sensors leads to have deficiency in spatial resolution along a measurement distance. The goal of moving an array in this study is to form 3D array aperture surrounding multiple sound sources so that the improved spatial resolution in a virtual space can be expected. Numerical simulation was made to examine source localization capabilities of various shapes of array. The 3D beam power maps of hemispherical and spherical distribution are found to have very sharp resolution. For experiments, two sound sources were placed in the middle of defined virtual space and arc-shaped line array was rotated around the sources. It is observed that spherical array show the most accurate determination of multiple sources' positions.

• 한국소음진동공학회논문집
• /
• 제19권9호
• /
• pp.907-914
• /
• 2009

An approach to 3D visualization of multiple sound sources has been developed with the application of a moving array technique. Frequency domain beamforming algorithm is used to generate a beam power map and the sound source is modeled as a point source. When a conventional delay and sum beamformer is used, it is considered that 2D distribution of sensors leads to have deficiency in spatial resolution along a measurement distance. The goal of moving an array in this study is to form 3D array aperture surrounding multiple sound sources so that the improved spatial resolution in a virtual space can be expected. Numerical simulation was made to examine source localization capabilities of various shapes of array. The 3D beam power maps of hemispherical and spherical distribution are found to have very sharp resolution. For experiments, several sound sources were placed in the middle of defined virtual space and arc-shaped line array was rotated around the sources. It is observed that spherical array shows the most accurate determination of multiple sources' positions.

• 기술혁신연구
• /
• 제13권3호
• /
• pp.27-49
• /
• 2005

In this Paper, we analyzed the relative importance of multiple sources and their effects on innovative activities. Through factor analysis, we found 5 sources of innovative activities; university/laboratory source, within firm source, general information source, vertical/competitive relation source, and horizontal relation source. Through regression analysis, we found that (1) 'within firm source' is the most important source on innovative activities, (2) from inputs' point of view, the more 'vertical/competitive relation source' is, the less innovative activities we, (3) from outputs' point of view, innovations are more activated when 'university/laboratory source' is abundant. but, they are less activated when 'general information source' and 'vertical/competitive relation source' is abundant, and (4) according to firm size and innovation stages(newproduct innovation, upgraded product innovation, and process innovation), the effect of sources on innovative activities is different.

• 한국음향학회지
• /
• 제31권4호
• /
• pp.214-224
• /
• 2012

The objective of this paper is to design multichannel spherical loudspeaker array by considering various positioning methods such as Gaussian grid, Lebedev grid and packing method. For the spatial sound manipulation, which is to make desired sound field by controling multiple sound sources, the Kirchhoff-Helmholtz integral states that sound fields can be reproduced in terms of infinite control sources on the integral surface. But since we cannot control infinite number of sources for the implementation, we have to allocate finite number of sound sources which can approximately act as infinite number of sources. To manipulate sound field inside of a sphere (which is typical example of three dimensional array) by controlling sound sources on the surface, three methods of allocating sound sources, which are Gaussian grid, Lebedev grid and packing method, are reviewed. For each geometry, the performances of manipulation rendered by time-reversal operator and higher-order ambisonics are compared.

• Journal of Power Electronics
• /
• 제18권5호
• /
• pp.1479-1488
• /
• 2018

Power packet (PP) distribution system distributes power to different loads that share the same distribution cable in a packetized form. When compared with conventional power systems, a PP distribution system (PPDS) can reduce standby power, eliminate Point-of-Load (PoL) power conversion, and intelligently control the load demand from the source side. Due to the absence of PoL conversion, when multiple power sources at different voltage levels and conditioning requirements jointly send power to various loads at different voltage ratings, the generated voltage has an irregular shape. A large filter at each of the load sides is required to reduce such a large voltage ripple. In this paper, a single-inductor, multiple-input-single-output converter structure based multiple-energy-source mixer is proposed. It combines PP generation, maximum power point tracking (MPPT) of renewable energy sources (RESs) and filtering at the source side. To demonstrate the possible renewable energy integration, a PV panel is used as a power source together with other constant voltage sources. The PV power is approximately tracked using the constant voltage method and it is used for each of the PP generations. The proposed PP distribution system is experimentally verified and it is shown that a conventional PI controller is sufficient for stable system operation.

• 한국통신학회논문지
• /
• 제27권2A호
• /
• pp.130-136
• /
• 2002

위성, 지상파 방송 등과 같이 대역이 제한된 전송로를 통하여 다수의 영상 신호원들이 전송될 경구에, 신호원들 사이에 화질을 제어해 주는 방법이 필요하다. 본 논문에서는 영상 신호원들간 화질이 균등하게 분배되도록 화질을 제어하는 방법을 제안한다. 먼저, 다수의 영상신호원의 다중화 시스템에서 왜곡과 부호화율 사이의 관계를 찾는다. 그리고 나서, 왜곡-부호화율 관계를 사용하여 시간 지연 없이 실시간 구현으로 신호원들간 화질이 균등하게 분배되도록 각 신호원에 부호화 율을 할당한다. 실험결과로부터 기존의 제어방법에 비해서 제안된 화질 제어방법이 영상들 사이에 거의 균등한 화질을 유지시켜줌을 보인다.