• IEMEK Journal of Embedded Systems and Applications
• /
• v.5 no.4
• /
• pp.234-242
• /
• 2010

Two-way ranging methods such as TWR and SDS-TWR have been considered for many ranging systems because these methods are useful in the absence of synchronization. To estimate the location of a mobile node, complicated ranging procedures consisting of ranging frames between an anchor node and the mobile node are performed. Supporting multiple mobile nodes such as a few hundreds or thousands and several anchor nodes, the ranging procedures have the fatal disadvantage of processing delay and inefficient traffic bandwidth. On the other hand, the one-way ranging method is simple and fast, but susceptible to network synchronization. In this paper, we propose a method to modify asynchronous ranging equations to establish exact frequency or frequency offset, a method to estimate frequencies or frequency offsets, and a method to establish post-facto synchronization with anchor nodes. The synchronization for a node pair is adapted using instantaneous time information and corresponding difference of distances can be determined. We evaluate the performance of TWR, SDS-TWR and proposed ranging algorithms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.9B
• /
• pp.563-568
• /
• 2007

This paper proposes a routing establishment method for improving path stability in mobile ad-hoc networks. In mobile ad-hoc networks, the network topology is highly dynamic due to the node mobility unlike wired networks. Since the existing methods are based on the shortest path algorithm with the minimum hop count regardless of the path stability, it could lead to packet loss and path disconnection in mobile ad-hoc networks. In particular, if control packets and critical data are transmitted on the unstable path, it causes serious problems. Therefore, this paper proposes one approach in order to minimize packet loss and path disconnection by considering the node mobility. After the destination node receives multiple RREQ messages, it selects the stable path through the proposed MinMax algorithm according to the node speed.

• The KIPS Transactions:PartD
• /
• v.8D no.4
• /
• pp.439-450
• /
• 2001

Mobile agent is one of the promising ways of overcoming network load and latency. It is also a new software paradigm including those concepts of client/server, applet/servelet, and code-on-demand. In this paper, a new mobile agent concept with flexible replay scheme is proposed, which can deal with embarrassing situation when replying results should be accomplished in various distributed applications. For example, they are 1) a burden of bulky result, 2) a need of different replay scheme dependent on work type, 3) connection failure to the target node, and 4) a need of fast migration to next node to keep the itinerary. Regarding the source node, there may be another situation that it wants to be aware of whether its wi가 is completed or not. Three kinds of reply schemes are proposed for dealing flexibly with such situations. They are based on priority reply list where nodes to be replied are stored according to their priorities. An experimental supply chain management model using the proposed reply schemes is designed and implemented. It is one of good distributed applications appropriate for our reply schemes, because it requires different reply schemes according to work types and it is important to gather required information in time.

• The Journal of Engineering Research
• /
• v.7 no.1
• /
• pp.37-51
• /
• 2005

An and hoc network is a collection of wireless mobile nodes forming a temporary network without the centralized administration. Due to the limited transmission range of wireless work interface, multiple networks "hops" maybe needed for one node to exchange data with adjacent node. In recent years, a variety of new routing protocol about ad hoc network was developed. This paper presents a new routing protocol based on the Dynamic Source Routing which is not suitable for the high mobility ad hoc network. The Enhanced DR adapts quickly to routing changes when node movement is frequent. When a trunk route is broken, this protocol will utilize the alternative route saved in the route to discovery quickly the new route. It improves the performance of the existing DSR algorithm, so that the negative impacts from weakness of DSR are reduced.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.4
• /
• pp.677-685
• /
• 2012

Recently, wireless multi-networking technology has been studied for supporting multi-interface in mobile node. As the related work, in the IETF NetExt WG, the extension of Proxy Mobile IPv6 protocol for supporting flow mobility is actively on going in discussion. PMIPv6 protocol supports simultaneous access through the multi-interface in a mobile node and inter-technology handover between multiple interfaces. However, this protocol can not support flow mobility. Thus, in this paper, when a mobile node connects to PMIPv6 domain through multi-interface, as a way to support flow mobility, the design of logical interface and Home Network Prefix change scheme based on logical interface are proposed, We show that the proposed scheme can perform flow mobility service without end-to-end disconnection in PMIPv6 domain.

• Journal of KIISE:Information Networking
• /
• v.36 no.5
• /
• pp.405-412
• /
• 2009

Mobile ad hoc networks (MANETs) allow mobile nodes to communicate among themselves via wireless multiple hops without the help of the wired infrastructure. In the MANET, it is required not only a route setup mechanism that makes nodes not within each other's transmission range communicate but also mechanism in order for a node to auto-configure a unique address. In this paper, we propose an address auto-configuration mechanism when MANET is connected to the Internet via several Internet Gateways and all gateways advertise the same network prefix. By using the proposed mechanism, once a node configures an Internet topologically correct and globally unique IP address, then the node can utilize the configured address even though the node moves within the MANET. Through the simulations, we analyze the performance of our proposed mechanism and, from the simulation results, we show that out proposed mechanism outperforms the existing mechanism.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.12
• /
• pp.71-80
• /
• 2014

Recently, most mobile nodes, such as smartphones, will have multiple wireless radio interfaces. This feature allows a mobile node to access a multi-network through multiple wireless radio interfaces simultaneously. Accordingly, various networking technology has been studied to use wireless multi-interface more efficiently. In this paper, MPTCP based handover scheme is proposed to reduce data loss and end-to-end latency during the handover in PMIPv6 domain. The proposed scheme performs 2-step flow mobility on the multi-path established through the multi-interface of mobile node in the handover procedure and uses MPTCP subflow function to overcome end-to-end disconnection during the handover. Therefore, the proposed scheme takes the advantage of being able to minimize data loss and a latency generated during performing the handover of mobile node.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.7
• /
• pp.641-655
• /
• 1992

In this paper, the performance of the various multiple accesstechniques for the mobile computer network has been studied in the consideration of the characteristics. Of the mobile communication channel. In the case of the hidden node occurring, it could be seen that the performance of the code division multiple access(CDMA) technique. With simultaneous access function is better than that of the other packet access methods such as carrier sensed multiple access(CAMA). Busy tone mulitiple access(BTMA)and idle signal muitiple access(ISMA) in the view of the throuhtput and mean delay time. Also it has been shown that the performance of the CDMA method is superior to that of other packet access techniques such as multiple access(CSMA).etc when the fading effect or impulsive noise exists in the mobile channel. Especially in the case of the distributed mobile network. It has been shown that the receiver-transmitter based CDMA method using the characteristics of CDMA effectively has better throughput and less mean delay time than the commontransmitter based CDMA technique.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.6
• /
• pp.235-242
• /
• 2007

Network Mobility Basic Support protocol reduces location-update signaling by making network movements transparent to the mobile nodes (MNs) behind the mobile router (MR), but causes some problems such as sub-optimal routing and multiple encapsulations. This paper proposes an Route Optimization Employing HMIP Extension for Mobile Networks (ROHMIP) scheme for nested nubile networks support which introduces HMIP concept with relation information between MNNs behind a MR and the MR in order to localize handoff, to optimize routing and especially reduce handoff signal overhead. With ROHMIP, a mobile network node (MNN) behind a MR performs route optimization with a correspondent node (CN) as the MR sends a binding update message (BU) to mobility anchor point (MAP) via root-MR on behalf of all active MNNs when the mobile network moves. This paper describes the new mechanisms and provides simulation results which indicate that our proposal reduces transmission delay, handoff latency and signaling overhead.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.3
• /
• pp.1287-1300
• /
• 2018

Target-tracking algorithm based on ad hoc camera sensor networks (ACSNs) utilizes the distributed observation capability of nodes to achieve accurate target tracking. A compressed sensing-based multiple-target tracking algorithm (CSMTTA) for ACSNs is proposed in this work based on the study of camera node observation projection model and compressed sensing model. The proposed algorithm includes reconfiguration of observed signals and evaluation of target locations. It reconfigures observed signals by solving the convex optimization of L1-norm least and forecasts node group to evaluate a target location by the motion features of the target. Simulation results show that CSMTTA can recover the subtracted observation information accurately under the condition of sparse sampling to a high target-tracking accuracy and accomplish the distributed tracking task of multiple mobile targets.