• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.5B no.2
• /
• pp.103-110
• /
• 2005

Broken rotor bars in induction motors can be detected by monitoring any abnormality of the spectrum amplitudes at certain frequencies in the motor current spectrum. Broken rotor bar fault detection schemes should rely on multiple signatures in order to overcome or reduce the effect of any misinterpretation of the signatures that are obscured by factors such as measurement noises and different load conditions. Multiple Discriminant Analysis (MDA) and Artificial Neural Networks (ANN) provide appropriate environments to develop such fault detection schemes because of their multi-input processing capabilities. This paper describes two fault detection schemes for broken rotor bar fault detection with multiple signature processing, and demonstrates that multiple signature processing is more efficient than single signature processing.

• Journal of Information Processing Systems
• /
• v.12 no.2
• /
• pp.295-309
• /
• 2016

Spectrum sensing is an essential function that enables cognitive radio technology to explore spectral holes and resourcefully access them without any harmful interference to the licenses user. Spectrum sensing done by a single node is highly affected by fading and shadowing. Thus, to overcome this, cooperative spectrum sensing was introduced. Currently, the advancements in multiple antennas have given a new dimension to cognitive radio research. In this paper, we propose a multiple energy detector for cooperative spectrum sensing schemes based on the evidence theory. Also, we propose a reporting mechanism for multiple energy detectors. With our proposed system, we show that a multiple energy detector using a cooperative spectrum sensing scheme based on evidence theory increases the reliability of the system, which ultimately increases the spectrum sensing and reduces the reporting time. Also in simulation results, we show the probability of error for the proposed system. Our simulation results show that our proposed system outperforms the conventional energy detector system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.7
• /
• pp.656-665
• /
• 1992

In this paper, the performance of the various multiple access techniques for the mobile computer network has been studiedi in the consideration of the charactersitics of the mobile cimmunication channel. In the case of the hidden node occurring. It could be seen that the performance of the code division multiple access (CDMA) technique with simultaneous access function is better than that of the other packet access methods such as carrier sendsed multiple access (CDMA), busy tone multiple access (BTMA) and idle signal multiple access (ISMA) in the view of the throughput and mean delay time. Also, it has been shown that the performance of the CDMA method is superior to that of other packet access techniques such as multiple access (CSMA), etc. when the fading effect or impulsive noise exists in the mobile channel, Especially, in the case of the distributed mobile network it has been shown that the receivertransmitter based CDMA method using the characteristics of CDMA effectively has better throughput and less mean delay time than the commontransmitter based CDMA technique.

• Structural Engineering and Mechanics
• /
• v.84 no.3
• /
• pp.295-310
• /
• 2022

This paper proposes a modified bar simulation method for analyzing the shear lag effect of variable sectional box girder with multiple cells. This theoretical method formulates the equivalent area of stiffening bars and the allocation proportion of shear flows in webs, and re-derives the governing differential equations of bar simulation method. The feasibility of the proposed method is verified by the model test and finite element (FE) analysis of a simply supported multi-cell box girder with constant depth. Subsequently, parametric analysis is conducted to explore the mechanism of shear lag effect of varied sectional cantilever box girder with multiple cells. Results show that the shear lag behavior of variable box-section cantilever box girder is weaker than that of box girder with constant section. It is recommended to make the gradient of shear flow in the web with respect to span length vary as smoothly as possible for eliminating the shear lag effect of box girder. An effective countermeasure for diminishing shear lag effect is to increase the number of box chambers or change the variation manner of bridge depth. The shear lag effect of varied sectional cantilever box girder will get more server when the length of central flanges is shorter than 0.26 or longer than 0.36 times of total width of top flange, as well as the cantilever length exceeds 0.29 times of total length of box's flange. Therefore, the distance between central webs can adjust the shear lag effect of box girder. Especially, the width ratio of cantilever plate with respect to total length of top flange is proposed to be no more 1/3.

• The Journal of Korean Medicine
• /
• v.16 no.1 s.29
• /
• pp.379-402
• /
• 1995

This study was performed to investigate the comparative effects of Apitoxin(0.1% bee venom 0.1cc) & Acupuncture therapy on the knee joint arthritis induced by 0.1% carrageenin solution at Rt. knee joint in rats. After carrageenin injection, the apitoxin was injected for two times (Experimental group I : 1 & 24hours later, Experimental group II : 48 & 72hours later) into the corresponding loci to Rt. $ST_{35}$(Group 3) & $EX-LE_4$(group 4) of the human body in rats. Acupuncture therapy was done same as above. And then the comparative effects of apitoxin and acupuncture therapy on the knee joint arthritis were estimated by the WBC count, RBC count, hemoglobin level, hematocrit level and ASO titer in serum. The results were summerized as follows : 1. The effects of apitoxin & acupuncture on WBC count showed remarkable decrease at group 3 & group 4 as compared with the control group in both experimental group I & experimental group II. There were not any statistical difference from apitoxin and acupuncture therapy by Duncan's multiple range test. 2. The effect of apitoxin on RBC count showed noticeable decrease at group 3 & group 4 as compared with the control group in both experimental group I & experimental group II. The acupuncture was not showed decrease at group 3 & group 4 as compared with the control group in both experimental group I & experimental group II. There were not any statistical difference from apitoxin and acupuncture therapy by Duncan's multiple range test. 3. The effects of apitoxin & acupuncture on hemoglobin level showed noticeable decrease at group 3 & group 4 as compared with the control group in both experimental group I & experimental group II. There were not any statistical difference from apitoxin and acupuncture therapy by Duncan's multiple range test. 4. The effect of apitoxin on hematocrit level showed noticeable decrease at group 3 & group 4 as compared with the control group in both experimental group I & experimental group II. The acupuncture was not showed decrease at group 3 & group 4 as compared with the control group in both experimental group I & experimental group II. There were not any statistical difference from apitoxin and acupuncture therapy by Duncan's multiple range test. 5. The effect of apitoxin on ASO titer showed noticeable decrease at group 3 & group 4 as compared with the control group only in experimental group I. The apitoxin & acupuncture showed decrease at group 3 & group 4 as compared with the control group in experimental group II. There were significantly statistical difference from apitoxin and acupuncture therapy by Duncan's multiple range test. The effect of apitoxin showed slightly decrease as compared with the acupuncture therapy by Duncan's multiple range test.

• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3236-3246
• /
• 2021

Lessons learned from the Fukushima Daiichi nuclear power plant accident directed that multiple failures should be considered more seriously rather than single failure in the licensing bases and safety cases because attempts to take accident management measures could be unsuccessful under the high radiation environment aggravated by multiple failures, such as complete loss of electric power, uncontrollable loss of coolant inventory, failure of essential safety function recovery. In the case of the complete loss of electric power called station blackout (SBO), if there is no mitigation action for recovering safety functions, the reactor core would be overheated, and severe fuel damage could be anticipated due to the failure of the active heat sink. In such a transient condition at CANDU-6 plants, the seal failure of the primary heat transport (PHT) pumps can facilitate a consequent increase in the fuel sheath temperature and eventually lead to degradation of the fuel integrity. Therefore, it is necessary to specify the regulatory guidelines for multiple failures on a licensing basis so that licensees should prepare the accident management measures to prevent or mitigate accident conditions. In order to explore the efficiency of implementing accident management strategies for CANDU-6 plants, this study proposed a realistic accident analysis approach on the SBO transient with multiple-failure sequences such as seal failure of PHT pumps without operator's recovery actions. In this regard, a comparative study for two PHT pump seal failure modes with and without coolant seal leakage was conducted using a best-estimate code to precisely investigate the behaviors of thermal-hydraulic parameters during transient conditions. Moreover, a sensitivity analysis for different PHT pump seal leakage rates was also carried out to examine the effect of leakage rate on the system responses. This study is expected to provide the technical bases to the accident management strategy for unmitigated transient conditions with multiple failures.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.8
• /
• pp.437-444
• /
• 2014

In this paper, we propose a path loss model with the multiple antennas and doppler shift for high speed railroad communication. Path loss model is very important in order to design consider diverse characteristic in high-speed train communication. Currently wireless communication systems use the multiple antennas in order to improve the channel capacity or diversity gain. However, until recently, many researches on path loss model only consider geographical environment between the transmitter and the receiver. There is no study about path loss model considering diversity effect and doppler shift. In order to make average residuals considering doppler shift we use tuned free space path loss model which is utilized for measurement results at high speed railroad. The environment of high speed rail is mostly at viaduct and flatland over than 50 percent. And in order to make average residuals considering multiple antenna we use theoretical estimation of diversity gain with MRC scheme. proposed model predict loss of received signal by estimating average residuals between diversity effect and doppler shift.

• Nutrition Research and Practice
• /
• v.18 no.4
• /
• pp.554-566
• /
• 2024

BACKGROUND/OBJECTIVES: Urban-rural inequities in health and mortality exist in Korea, a highly centralized developed country. The potential impact of multiple health-related lifestyle behaviors on mortality and difference between urban and rural areas is not fully understood. This study aimed to investigate the effect of high-risk health behaviors on all-cause mortality among residents living in urban and rural in Korea. SUBJECTS/METHODS: Cross-sectional analyses were conducted on 8,298 adults aged 40 yrs and older from the Korea National Health and Nutrition Examination Survey 2013-2015. High-risk behaviors were defined as having poor diet quality, current smoking, high-risk drinking, or insufficient physical activity. Mortality status was linked to the Cause of Death data followed up to December 31, 2019. The associations between all-cause mortality and high-risk behaviors were evaluated using Cox proportional hazard regression models adjusted for age, sex, education, income, and survey year. Population attributable fractions (PAFs) were calculated, and effect modification analysis was conducted. Participants were stratified by residential area (urban or rural). RESULTS: During the follow-up (median: 5.4 yrs), 313 deaths occurred. A higher proportion of rural residents than urban residents engaged in multiple high-risk behaviors (28.9% vs. 22.6%; P < 0.0001). As individual factors, a greater risk of mortality was associated with poor diet quality, current smoking, and inadequate physical activity, and these tendencies persisted in rural residents, especially for diet quality. Multiple high-risk behaviors were positively associated with a higher risk of mortality in Koreans living in urban and rural areas. PAF (95% confidence interval) was 18.5% (7.35-27.9%) and 29.8% (16.1-40.2%) in urban and rural residents, respectively. No additive or multiplicative effect of the region was observed. CONCLUSION: The higher prevalence of multiple high-risk lifestyle behaviors in rural residents may explain the higher mortality in rural areas compared to urban areas. Comprehensive public health policies to improve health-related behaviors in rural populations may be needed.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.19 no.2
• /
• pp.215-219
• /
• 2009

The effect of mating duration and multiple use of male on fecundity and fertility was investigated in the hybrids of Silkworm, Bombyx mori L. One hour to five hours of mating duration did not affect egg laying (fecundity) significantly, while fertilization affected significantly. Below 50% fertility was noticed when mating duration was reduced to below two hours. Similarly multiple use of male caused significant reduction in fertility but not fecundity. Till fourth mating no significant reduction in fertility was observed, thereafter fertility reduced considerably.

• ETRI Journal
• /
• v.30 no.3
• /
• pp.355-364
• /
• 2008

Multiple-input multiple-output (MIMO) systems can provide significant increments in capacity; however, the capacity of MIMO systems degrades severely when spatial correlation among multipath channels is present. This paper demonstrates that the influence of shadowing on the channel capacity is more substantial than that of multipath fading; therefore, the shadowing effect is actually the dominant impairment. To overcome the composite fading effects, we propose combining macroscopic selection diversity (MSD) schemes with MIMO technology. To analyze the system performance, the capacity outage expression of MIMO-based MSD (MSD-MIMO) systems using a characteristic function is applied. The analytic results show that there are significant improvements when MSD schemes are applied, even for the two-base-station diversity case. It is also observed that the effect of spatial correlation due to multipath fading is almost negligible when multiple base stations cooperatively participate in the mobile communication topology.