• The Journal of Information Technology
• /
• v.6 no.2
• /
• pp.1-8
• /
• 2003

This paper is about power line communication(PLC) over the low power voltage grid. The main advantage with power line communication is the use of an existing infrastructure. The PLC channel can be modeled as having multi-path propagation with frequency-selective fading, typical power lines exhibit signal attenuation increasing with length and frequency. OFDM(Orthogonal Frequency Division Multiplexing) is a modulation technique where multiple low data rate carriers are combined by a transmitter to form a composite high data rate transmission. To implement the multiple carrier scheme using a bank of parallel modulators would not be very efficient in analog hardware. Each carrier in an OFDM is a sinusoid with a frequency that is an integer multiple of a base or fundamental sinusoid frequency. Therefore, each carrier is a like a Fourier series component of the composite signal. In fact, it will be shown later that an OFDM signal is created in the frequency domain, and then transformed into the time domain via the Discrete Fourier Transform(DFT).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.95-98
• /
• 2006

Data collected by sensors in field are transmitted to the base station gathering all of data. Because sensors have to gather data in surroundings and periodically transmit data to the base station, it makes energy consumed much. In this paper, we propose the scheme that is to avoid traffic congestion with achievement of energy efficiency, so collected data is transmitted efficiently. This is to adjust transmission rate differently in case of increasing or decreasing traffic and minimize the energy consumption with setting ideal options up basic CSMA(Carrier Sense Multiple Access) protocol in each sensor. Through the simulation, we find the ideal CSMA options and apply the proposed scheme of traffic control mechanism to them, then show energy efficiency and effective traffic control mechanism.

• Journal of Internet Computing and Services
• /
• v.12 no.4
• /
• pp.1-14
• /
• 2011

This paper analyzes the fairness and efficiency of channel sharing when heterogeneous wireless networks that have different transmission power and/or coverage coexist with the contention-based channel access protocol. First, we show that the existing CSMA (carrier sensing multiple access) protocol, that is a prevailing contention-based mechanism, results in significant unfairness of channel access because of (1) the asymmetric capability of carrier sensing and (2) the blindness of binary exponential backoff and link adaptation mechanisms to the interference-driven transmission failures. Next, we derive the feasible region of carrier sensing thresholds that assures spatial reuse and fair channel sharing simultaneously. Moreover, we establish an analytical model for per-system throughput and investigate the effect of contention window size and transmission rate on the fairness and efficiency of channel sharing. Finally, we compare the performance of several approaches for fair channel sharing via simulations under various network configurations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.294-301
• /
• 2013

OFDM technique uses multiple sub-carriers for the data transmission. Therefore, bit error rate increases because of inter-carrier interference caused by nonlinear high power amplifier and carrier frequency offset. Wireless OFDM transmission over multi path fading channels is characterized by small transmission gain in multiple sub-carrier frequency interval. Therefore bit error rate increases because of burst errors. Inter-leaver and convolution error control coding are effective for the reduction of this burst error. Pilot symbol is used for the channel estimation in OFDM systems. However, imperfect channel estimates in this systems degrade the performance. The performance of this convolution coding OFDM systems using inter-leaver, gauged by the bit error rate, is analyzed considering the nonlinear high power amplifier, carrier frequency offset and channel estimation error.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.12
• /
• pp.2226-2234
• /
• 2016

Orthogonal Frequency Division Multiplexing (OFDM) technique uses multiple sub-carriers for the data transmission. Therefore, Inter Carrier Interference(ICI) is generated because of nonlinear high power amplifier and carrier frequency offset. Wireless OFDM transmission over Doppler fading channels also causes ICI. In OFDMA(Orthogonal Frequency Division Multiplexing Access), multiple sub-carriers are allocated to each user. Therefore, inter carrier interference causes interference to other users. I evaluate the BER performance of OFDMA systems in frequency selective fading channel, considering Multi-User Interference (MUI) owing to the carrier frequency offset, the nonlinear high power amplifier, and the Doppler fading. In the uplink OFDMA, multi-user interference introduces larger BER degradation than in the downlink. I explain the reason and obtain the required characteristics of the nonlinear amplifier and the value of frequency offset for good BER performance. And I also analyze the BER degradation upon Doppler fading channel.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.6
• /
• pp.589-594
• /
• 2015

In this paper, we described the Cramer-Rao Lower Bound (CLRB) performances of Time Difference of Arrival (TDOA) and Frequency Difference of Arrival (FDOA) methods when there are multiple emitters. The TDOA and FDOA values between two receivers can be simultaneously estimated by using the so-called Complex Ambiguity Function (CAF). In the case of multiple emitters, there exist Inter Symbol Interferences (ISIs) in the measurement data. Therefore, it is required to reduce the effect of ISI and provide a performance evaluation method of TDOA and FDOA estimations. In order to eliminate the ISIs, using of a filter bank before calculating CAF is proposed when the carrier frequencies of the emitters are different to one another. Angle of Arrival (AOA) or Received Signal Strength (RSS) methods before calculating CAF were proposed to reduce the ISIs when the carrier frequencies are the same. In order to evaluate the CRLB of TDOA and FDOA estimations, we employed the conditional probability distribution method and described the numerical comparison results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.12
• /
• pp.1065-1075
• /
• 2012

For the purpose of providing high data rate real-time services, radio transmission technologies (RTT) for ship ad-hoc network (SANET) based on the Recommendation ITU-R 1842-1 are designed. Physical layer parameters of SANET are contrived to meet the requirements of the specification. In order to improve the link reliability for SANET, in this paper, we investigate the performance of the SANET with the multiple antennas, where receive combining (RC), transmit diversity (TD), and beamforming (BF) are employed, respectively. Based on the analysis of the packet error rate (PER) under the highly correlated maritime wireless channel model, we select the efficient multiple antenna schemes for SANET to improve the link reliability. In addition, the optimal MCS levels for the single-carrier (SC) SANET with the bandwidth of 25 kHz, and the multi-carrier (MC) SANET with the bandwidth of 50 kHz and 100 kHz are finalized.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.5
• /
• pp.10-22
• /
• 2015

Recently, 3rd Generation Partnership Project (3GPP) has developed sidehaul system to cope with the explosively increasing mobile data traffic. The sidehaul system is based on single carrier-frequency division multiple access (SC-FMDA) due to its low peak to average power ratio (PAPR). Also, antenna array is designed to support multiple input multiple output (MIMO) in a restricted space. In this paper, we design the antenna array about uniform linear array (ULA), uniform circular array (UCA) and uniform planar array (UPA), and analysis the performance in sidehaul system. In addition, we propose the novel hybrid receiver full suppression cancellation (FSC) to reduce the interference from neighbor cell in sidehaul system. The proposed receiver can suppress and cancel the interference by combining interference rejection combining (IRC) with successive interference cancellation (SIC).

• Journal of Communications and Networks
• /
• v.16 no.4
• /
• pp.447-457
• /
• 2014

In this paper, we investigate the frequency domain channel estimation for multiple-input multiple-output (MIMO) single-carrier frequency-division multiple-access (SC-FDMA) systems. In MIMO SC-FDMA, code-division multiplexed (CDM) pilots such as cyclic-shifted Zadoff-Chu sequences have been adopted for channel estimation. However, most frequency domain channel estimation schemes were developed based on frequency-division multiplexing of pilots. We first develop a channel estimation error model by using CDM pilots, and then analyze the mean-square error (MSE) of various minimum MSE (MMSE) frequency domain channel estimation techniques. We show that the cascaded one-dimensional robust MMSE (C1D-RMMSE) technique is complexity-efficient, but it suffers from performance degradation due to the channel correlation mismatch when compared to the two-dimensional MMSE (2D-MMSE) technique. To improve the performance of C1D-RMMSE, we design a robust iterative channel estimation (RITCE) with a frequency replacement (FR) algorithm. After deriving the MSE of iterative channel estimation, we optimize the FR algorithm in terms of the MSE. Then, a low-complexity adaptation method is proposed for practical MIMO SC-FDMA systems, wherein FR is performed according to the reliability of the data estimates. Simulation results show that the proposed RITCE technique effectively improves the performance of C1D-RMMSE, thus providing a better performance-complexity tradeoff than 2D-MMSE.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.6 s.360
• /
• pp.48-56
• /
• 2007

OFDMA (Orthogonal Frequency Division Multiple Access) is widely used as multiple access techniques for next generation mobile communication systems. However, OFDMA has a disadvantage of high peak-to-average power ratio and SC-FDMA (Single-Carrier Frequency Division Multiple Access) was proposed for uplink systems to overcome the drawback. SC-FDMA also has several demerits including degraded performance with high-order modulations or with multiple antenna techniques, and less flexibility in resource allocation and pilot patterns. In order to achieve the best performance over a wide range of environments, each mobile station should select either of OFDMA and SC-FDMA according to the given condition and a pilot structure for SC-FDMA systems should be similar to that of OFDMA to maintain the same frame structure. While conventional SC-FDMA schemes require an entire SC-FDMA symbol or a separate short symbol for pilots, this paper proposes a method which supports the pilots included in SC-FDMA data parts and enables a SC-FDMA frame to hold the same structure as an OFDMA frame.