• Journal of Korea Multimedia Society
• /
• v.17 no.8
• /
• pp.977-987
• /
• 2014

Many of the recent performance evaluation of clustering schemes in wireless sensor networks considered one sink node operation and fixed sink node location without mentioning about any network application requirements. However, application environments have variable requirements about their networks. In addition, network performance is sufficiently influenced by different sink node location scenarios in multi-hop based network. We also know that sink location can influence to the sensor network performance evaluation because of changed multipath of sensor nodes and changed overload spots in multipath based wireless sensor network environment. Thus, the performance evaluation results are hard to trust because sensor network is easily changed their network connection through their routing algorithms. Therefore, we suggest that these schemes need to evaluate with different sink node location scenarios to show fair evaluation result. Under the results of that, network performance evaluation results are acknowledged by researchers. In this paper, we measured several clustering scheme's performance variations in accordance with various types of sink node location scenarios. As a result, in the case of the clustering scheme that did not consider various types of sink location scenarios, fair evaluation cannot be expected.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2A
• /
• pp.103-109
• /
• 2006

OFDM system has a disadvantage of sensitiveness about the effect of the frequency offset caused by the discord of oscillators in transmitter and receiver. The frequency offset can be divided into integral part and decimal part. Although the frequency offset of integral part do not effect orthogonality between subcarriers, it makes the bit error probability become to 0.5 because of circular transient among transmitted data symbols. This paper proposes a new estimation scheme of the frequency offset of integral part by Maximum Likelihood (ML) demanding only one training symbol in multipath fading channel environment. This proposed scheme not only can reduce the number of training symbol but do not increase the complexity and it shows the better performance by simulation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.61-65
• /
• 2014

In this paper, we propose a method using cooperative spectrum sensing to avoid multipath and frequency selective fading. One of methods in conventional scheme was multi input multi output (MIMO) solution. However, in the wireless environment, mobile device hardly supports multi antenna because of limitation of hardware. Motivated from above problems, the proposed method provides the information of excellent channel to transmitter. As a result, quality of service (QoS) required by users can be satisfied. Finally, performance of the proposed protocol is analyzed in term of bit error rate (BER).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.9
• /
• pp.1812-1823
• /
• 1994

In this paper, we focus on the simulation of receiver algorithms for the Q-CDMA reverse link modem to analyze its structure and performance. Receiver algorithm is to be characterized by processing a large amount of data for reliable data transmission through poor mobile channel environment. According to Q-CDMA receiver scheme, we connect the code acqusition and code tracking models for despreading of input signals and the RAKE structure demodulator used to resolve the time diversity signal due to multipath propagation. And this connected system is under test. The bit error rates are found for an arbitrary user under the AWGN and multipath fading environments.

• Journal of Communications and Networks
• /
• v.13 no.3
• /
• pp.221-231
• /
• 2011

A joint multipath routing algorithm and channel allocation and scheduling for wireless multihop and multichannel systems is discussed. In packet transmission, distribution of packets to multiroutes makes it possible to reduce the transmission cost of the channels. Cross-layer cooperation of routing, channel allocation, and scheduling is an effective method of packet distribution. As a framework for the cooperation, we propose a multiroute distance vector routing (MDVR) scheme. In the MDVR scheme, the routing table is logically placed in between the routing and link layers, and the table plays the role of a service access point between these two layers. To evaluate the performance of MDVR, simulation is performed in a multichannel, multihop environment. The simulation results show that the MDVR framework can be efficiently implemented in the form of a distributed routing algorithm. It is also shown that in MDVR, the system-wise channel efficiency is almost 25% higher than that in a conventional single-route routing approach.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.3
• /
• pp.254-260
• /
• 2011

Telemetry link is dynamic communication link that antenna gain and polarization are varying with the movement of the airplane. In this paper we calculated the antenna gain, polarization mismatch using the flight trajectory, motion of the airplane and 3D antenna pattern. And we modeled the multipath environment to the 2-Ray spherical earth reflection geometry, estimated the received signal strength when the narrow beam antenna received the RF signal transmitted from the airplane. Also we performed the flight test and after comparing measured value with the estimated value, we confirmed to almost coincide with each other.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.3
• /
• pp.1-10
• /
• 2010

Impulse Radio Ultra-wideband (IR-UWB) system employing the short pulse has the tolerable characteristics for the multipath environment. The corresponding transceiver with low power consumption can be simply implemented. On the other hand, in the receiver side, the precise channel estimation is required for the knowledge of essence in channel due to the short period of pulse. The estimated gains and delays in channel are used in the rake receiver. The resulting parameters we search have a strong influence on the performance in the entire system. We introduce that the essential parameters can be obtained more precisely through the preamble in receiver side for the channel estimation and related technologies are presented.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.3
• /
• pp.405-413
• /
• 2011

Defense Systems Test Center in ADD supports increasingly various missile test requirements such as higher altitude event, multi target operation and low-altitude, high velocity target tracking. In this paper, we have proposed the development of instrumentation radar tracking status simulator based on virtual reality. This simulator can predict the tracking status and risk of failure using several modeling algorithms. It consists of target model, radar model, environment model and several algorithms includes the multipath interference effects. Simulation results show that the predict tracking status and signal are similar to the test results of the live flight test. This simulator predicts and analyze all of the status and critical parameters such as the optimal site location, servo response, optimal flight trajectory, LOS(Line of Sight). This simulator provides the mission plan with a powerful M&S tool to rehearse and analyze instrumentation tracking radar measurement plan for live flight test at DSTC(Defense Systems Test Center).

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.2
• /
• pp.415-421
• /
• 2009

TOA(time-of-arrival) and TDOA(time-difference-of-arrival) positioning techniques are commonly used in many radio-navigation systems. From the literature, it is known that the position estimate and error covariance matrix of TDOA obtained by GN(Gauss-Newton) method is exactly the same as that of TOA when the error source of the range measurement is only an IID white Gaussian noise. In case of geo-location and indoor positioning, however, multi-path or NLOS(non-line-of-sight) error is frequently appeared in range measurements. Though its occurrence is random, the multipath acts like a bias for a stationary user if it occurs. This paper presents the comparisons of error characteristics between TOA and TDOA positioning in presence of multi-path or NLOS error. It is analytically shown that the position estimate of TDOA is exactly the same as that of TOA even when bias errors are included in range measurements with different magnitudes. By computer simulation, position estimation error and error distribution are analyzed in presence of range bias errors.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.7A
• /
• pp.629-634
• /
• 2002

The next generation of wireless communication system is expected to provide users with wireless multimedia services such as high speed internet access and wireless mobile computing. Depending on the Quality of Service(QoS) requirements and different applications per user, many wireless communication systems have been proposed. The simple decoding algorithm of space-time block coding is based on the assumption of flat fading channel, where no intersymbol interference exists. In this paper, we propose to combine space-time transmit diversity with adaptive equalizer. The proposed system effectively eliminates interference caused by multipath environment. Simulation results show that the proposed system provides improved bit error rate performance.