• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.4
• /
• pp.2002-2019
• /
• 2017

RPL routing protocol for low-power and lossy networks is an Internet Engineering Task Force (IETF) recommended IPv6 based protocol for routing over Low power Lossy Networks (LLNs). RPL is proposed for networks with characteristics like small packet size, low bandwidth, low data rate, lossy wireless links and low power. RPL is a proactive routing protocol that creates a Directed Acyclic Graph (DAG) of the network topology. RPL is increasingly used for Internet of Things (IoT) which comprises of heterogeneous networks and applications. RPL proposes a single path routing strategy. The forwarding technique of RPL does not support multiple paths between source and destination. Multipath routing is an important strategy used in both sensor and ad-hoc network for performance enhancement. Multipath routing is also used to achieve multi-fold objectives including higher reliability, increase in throughput, fault tolerance, congestion mitigation and hole avoidance. In this paper, M-RPL (Multi-path extension of RPL) is proposed, which aims to provide temporary multiple paths during congestion over a single routing path. Congestion is primarily detected using buffer size and packet delivery ratio at forwarding nodes. Congestion is mitigated by creating partially disjoint multiple paths and by avoiding forwarding of packets through the congested node. Detailed simulation analysis of M-RPL against RPL in both grid and random topologies shows that M-RPL successfully mitigates congestion and it enhances overall network throughput.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.359-362
• /
• 2001

Analog communication systems using AM, FM modem have been developed. Digital communication systems using digital modems, which is by expansion of digital hardware skill have been recently developed. In order to accomplish a reliable communication it is important to overcome ocean environmental channel characteristics such as transmission loss, ambient noise and multipath effect etc. Specially, the effect of multipath is the most important element that determines the performance of underwater communication system in shallow water. Multipath channel can be divided a vertical and horizontal channel. the former is defined the channel to have large path-delay times between a direct wave and reflected waves. The latter shows relatively small path-delay times between a direct and reflected waves in compared with a vertical channel. In this paper, The performance of FSK, PSK and DPSK modem with respect to the vertical and horizontal multipath communication channels it described and compared.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.8B
• /
• pp.745-751
• /
• 2002

The performance of existing CDMA-type multiple access data transmission systems is limited by interferences due to adverse mobile communication channel characteristics. Among them, the multi-user interference becomes one of the major performance degradation factors because the signal-to-signal orthogonality can be easily perturbed when numerous user signals are distorted by multipath fading channels and mixed together. In order to enhance the performance of CDMA-type systems by suppressing the multi-user interference, we have adopted chip-based cyclic prefix insertion along with adaptive one-tap DFE equalization into MC-DS-CDMA, which is known for its robustness in the frequency selective multipath fading channel environment. In order to assess the performance of the proposed system, a set of computer simulations is performed in the reverse link in which each user signal undergoes different multipath Rayleigh fading. The results show us a superior performance of our system over other CDMA systems in terms of SNR to BER measurements.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.10
• /
• pp.2562-2570
• /
• 1997

This paper deals with the design and performance of the adaptive equalizer using high order statistics in order to improve the transmission characteristics of multipath fading channel. The multipath propagational phenomenon occurred in digital radio transmission causes the distortion and ISI of receiving signal. These are main reasons to increase the bit error rate and degrade the performance of receivers. In this paper, the adaptive equalization algorithm using high order statistics of received signal is used instead of CMA algorithm, Bussgang and Godard which are known widely. The performance of this algorithm (residualisi, recovered constellation, calculation) is presented varing SNR. As the result of the computer simulation, equalizer algorithm using high order statistics is better than CMA in the range of low SNR, $10{\sim}20dB$. Therefore, considering the actual communication systems which use the range of $14{\sim}20$ SNR, the adaptive equalizer using high order statistics can be used in the real multipath fading environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.12
• /
• pp.2233-2240
• /
• 2007

This paper presents the measured path loss exponents and standard deviations using measured data at 60GHz to analyze the propagation characteristics of millimeter wave bands having great demand for picocellular communications. In addition the angle of arrival(AOA) were measured to analyze the arrival direction of muitipath waves affecting the received signal strength. As results of analysis, the pathloss exponents in each environment are found to be lower than 2 for free space pathloss exponent. They were determined with the qualities of bottom materials affecting signal strength. The angles of arrival by multipath waves were different with the circumference structures between transmitter and receiver. That is, the multipath waves excluding direct and ground reflected wave were difficult to find in wide space such a gymnasium and playground, however the wall multipath waves were found to arrive at receiver in the corridor. The multipath waves at 60GHz can be known to hardly affect to the received signal strength because of weak signals compared with direct wave.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.5A
• /
• pp.836-845
• /
• 2001

본 논문에서는 시간 선택성 다중경로 이동 무선 채널을 다양한 방법으로 모델링 하고 그에 따른 여러 가지 특성평가를 제시하였다. 모델링 방법에는 Jakes 방식과 시간 영역에서 독립적인 두 개의 가우시안 잡음 발생기와 정형필터(shaping filter)를 사용하는 방식 및 주파수 영역에서 필터링 하는 방식이 있다. 이 세 가지 모델링 방법의 성능을 진폭의 자기상관함수, 상호상관함수, 누적분포함수(Cumulative Distribution Function), 레벨 교차율(Level Crossing Rate), 평균 페이딩 지속 시간(Average Duration of Fades), 위상차의 확률 밀도, 위상차의 자기상관함수 등의 측면에서 시뮬레이션하고 그 결과치와 이론치 간의 특성 비교를 제시하였다. 특히, 확산 대역 시스템을 고려했을 때 이상적인 채널 추정을 가정한 레이크 수신기에서의 BER 성능을 다중경로 개수에 따라 보임으로써 여러 가지 채널 모델링 중에서 주파수 영역에서 필터링 하는 방식이 이동 무선 채널을 모델링 하는데 있어 가장 적합하다는 것을 보였다. 마지막으로 비대칭 도플러(Doppler) 스펙트럼을 모델링 하는 것도 주파수 영역에서 필터링 하는 방식이 편리하다.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.8 no.2
• /
• pp.95-102
• /
• 2013

In this paper, we have studied the performance of the AOA (Angle of Arrival) in multi-antenna systems for LBS (Location Based Services) and we also analyzed the performance of the AOA in SISO (Single Input Single Output) in multipath environments and their differences. The adequacy of AOA positioning in new communication environments was determined. Currently used positioning methods in 3G communication environment has been developed based on SISO. However, the accuracy of SISO-based TOA (Time of Arrival), TDOA (Time Difference of Arrival), AOA positioning techniques degraded in multipath environments. The communication system will be changed and developed. According to enhanced positioning techniques are required. Using antenna characteristics and the phase difference between antennas of LTE-Advanced standard's key technique MIMO system AOA positioning, and SISO based AOA positioning performance were analyzed. We found that AOA technique potential for use based on Multiple antenna systems by computer simulations.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.3
• /
• pp.19-29
• /
• 2008

Underwater acoustic(UWA) communication is one of the most difficult field in terms of severe channel environments such as multipath propagation, high temporal and spatial variability of channel conditions. Therefore, it is important to model and analyze the characteristics of underwater acoustic channel such as multipath propagation, transmission loss, reverberation, and ambient noise. In this paper, UWA communication channel is modeled with a ray tracing method and applied to image transmission. Quadrature phase shift keying(QPSK) and multichannel decision feedback equalizer(DFE) are utilized as phase-coherent modulation method and equalization technique, respectively. The objective is to improve the performance of the image transmission using vertical sensor array instead of single sensor in the viewpoint of bit error rate(BER), constellation diagram, and received image quality.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.110-113
• /
• 2004

Underwater acoustic(UWA) communication is one of the most difficult field because of several factors such as multipath propagation, high temporal and spatial variability of channel conditions. Therefore, it is important to model and analyze the characteristics of underwater acoustic channel such as multipath propagation, transmission loss, reverberation, and ambient noise. In this paper, UWA communication channel is modeled with a ray tracing method and applied to image transmission. Quadrature phase shift keying(QPSK) and multichannel decision feedback equalizer(DFE) are utilized as phase-coherent modulation method and equalization technique, respectively. The objective is to improve the performance of vertical sensor array than that of single sensor in the viewpoint of bit error rate(BER), constellation output, and received image quality.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2467-2469
• /
• 1998

We examine the performance of high-speed non-directed infrared links using pulse-position modulation (PPM) with trellis-coded modulation (TCM) to mitigate the effects of multipath-induced intersymbol interference(ISI) on such links. Using the measured characteristics of multipath indoor infrared channels, we calculate BER curves and ISI power penalties for maximum-likelihood sequence detection of 8-PPM links using rate-2/3 trellis codes operation at 10 and 30Mb/s. Our results indicate that the suggested decoder of PPM with TCM is a very promising decoder on high-speed non-directed infrared channels.