• Journal of the Korea Society of Computer and Information
• /
• v.8 no.4
• /
• pp.138-147
• /
• 2003

There are some problems of current internet protocols to support the mobility of terminal in wireless environments. The mobile IP has come out to solve these problems, but there exists some problems like triangle routing, the need of each host's home address and the management of tunneling. Also. real-time multimedia traffics require fast hand-off, low latency and the utilization ratio of high bandwidth. SIP can support the mobility of wireless terminal and is widely accepted as the protocol which can support multimedia service and call setup in next generation network. In this paper, the framework of SIP system will be designed and implemented to support the mobility of wireless terminal by using JAIN API which follow the standards of next generation network and this system matches the standards of next generation network.

• Journal of Korea Multimedia Society
• /
• v.12 no.12
• /
• pp.1778-1786
• /
• 2009

Many sensor network applications have been developed for smart home, disaster management, and a wide range of other applications. These applications, however, generally assume a fixed base station as well as fixed sensor nodes. Previous research on sensor networks mainly focused on efficient transmission of data from sensors to fixed sink nodes. Recently there has been active research on mobile sink nodes, sink mobility is one of the most comprehensive trends for information gathering in sensor networks, but the research of an environment where both fixed sink nodes and mobile sinks are present at the same time is rather scarce. This paper proposes a scheme for context-aware by ubiquitous devices with the sink functionality added through fixed sinks under a previously-built, cluster-based multi-hop sensor network environment. To this end, clustering of mobile devices were done based on the fixed sinks of a previously-built sensor network, and by using appropriate fixed sinks, context gathering was made possible. By mathematical comparison with TTDD routing protocol, which was proposed for mobile sinks, it was confirmed that performance increases by average 50% in energy with the number of mobile sinks, and with the number of movements by mobile devices.

• 한국IT서비스학회:학술대회논문집
• /
• 2010.05a
• /
• pp.207-210
• /
• 2010

무선 센서 네트워크 시스템을 이용한 많은 응용 시스템이 연구되고 있는 가운데, 최근 무선 센서 네트워크 시스템의 신뢰성 확보에 대한 문제점이 대두되었다. 이러한 문제점을 해결하기 위하여 영상 데이터를 전송함으로써 보다 신뢰성 있는 정보를 제공할 수 있는 멀티미디어 센서 네트워크에 대한 연구가 활발히 진행되고 있다. 그러나 영상 데이터를 저속의 멀티 홉 무선 센서 네트워크 환경에서 효율적으로 전송하는 프로토콜에 관련된 연구는 비교적 많지 않다. 지금까지의 통신 프로토콜들은 비교적 단순한 센싱 데이터를 전송할 수 있도록 설계되었으며, 새로운 응용들을 지원하기 위해서는 새로운 통신 프로토콜이 필요하다. 따라서 본 논문에서는 연속적인 영상 데이터를 멀티 홉 환경에서 효율적으로 전송할 수 있는 다중 경로 간 간섭이 없는 간섭 회피 다중 경로 설정 기법을 제안한다.

• Journal of KIISE:Information Networking
• /
• v.29 no.3
• /
• pp.314-323
• /
• 2002

The routing protocols designed for wired networks can hardly be used for mobile ad-hoc networks due to limited bandwidth of wireless transmission and unpredictable topological change. Recently, several routing protocols for mobile ad-hoc networks have been Proposed. However, when theme protocols are applied to support real time services like multimedia transmission, they still have problems in ad-hoc networks, where the topology changes drastically. In this paper, we propose a new route selection algorithm which selects the most reliable route that is impervious to route failures by topological changes by mobile hoots. For reliable route selection, the concept of virtual zone (stable zone and caution zone) is proposed. The zone is located in a mobile node'transmission range and determined by mobile node's mobility information received by Global Positioning System (GPS). The proposed algorithm is applied to the route discovery procedure of the existing on-demand routing protocol, AODV, and evaluated by simulation in various traffic conditions and mobility patterns.

• Journal of KIISE:Information Networking
• /
• v.29 no.3
• /
• pp.224-232
• /
• 2002

The routing protocols designed for wired networks can hardly be used for mobile ad-hoc networks due to limited bandwidth of wireless transmission and unpredictable topological change. Recently, several routing protocols for mobile ad-hoc networks have been proposed. However, when these protocols are applied to support real time services like multimedia transmission, they still have problems in ad-hoe networks, where the topology changes drastically. In this paper, we propose a new route selection algorithm which selects the most reliable rouse that is impervious to route failures by topological changes by mobile hosts. For reliable route selection, the concept of virtual zone (stable lone and caution zone) is proposed. The lone is located in a mobile node's transmission range and determined by mobile node's mobility information received by Global Positioning System (GPS). The proposed algorithm is applied to the route discovery procedure of the existing on-demand routing protocol, AODV, and evaluated by simulation in various traffic conditions and mobility patterns.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1089-1096
• /
• 2019

Recently, small-scale IoT services using a small amount of information through low-performance computing have been spread. It requires low cost, low-power, and long-distance communication technologies with wide communication radius, relatively low power consumption. This paper proposes a MAC layer and routing protocol that supports multi-hop transmission in small-scale IoT environment distributed over a large area based on LoRa communication and delivering a small amount of sensing data. The terminal node is mobile and the communication type provides bidirectional transmission between the terminal node and the network application server. By applying the proposed protocol, a production line monitoring system for smart factory was implemented. It was confirmed that the basic monitoring functions are normally performed.

• The KIPS Transactions:PartC
• /
• v.8C no.1
• /
• pp.60-67
• /
• 2001

Multicast Protocol for multimedia service on the Internet can be classified into two types, e.g., source based tree and shared tree according to difference of tree construction method. Shared tree based multicast is known to show outstanding results in the aspect of scalability than source based tree. Generally, There have been lots of researches on the method to satisfy QoS constraints through proper Rendezvous Point (RP) in the shared tree. In addition, as the multicast group members join and leave dynamically in the service time, RP of the shared tree should b be reselected for guranteeing Qos to new member, But, RP reselection method has not been considered generally as the solution to satisfy QoS C constraints. In this paper, new initial RP selection and RP reselection method are proposed, which utilize RTCP (Real Time Control Protocol) report packet fields. Proposed initial RP selection and RP reselection method use RTCP protocol which underlying multimedia application service So, the proposed method does not need any special process for collecting network information to calculate RP. New initial RP selection method s shows better performance than random and topology based one by 40-50% in simulation. Also, RP reselection method improves delay p performance by 50% after initial RP selection according to the member’s dynamicity.

• Journal of Korea Multimedia Society
• /
• v.11 no.8
• /
• pp.1082-1092
• /
• 2008

In wireless sensor networks, clustering protocol such as LEACH is an efficient method to increase whole networks lifetime. However, this protocol result in high energy consumption at the cluster head node. Hence, this protocol must changes the cluster formation and cluster head node in each round to prolong the network lifetime. But this method also causes a high amount of energy consumption during the set-up process of cluster formation. In order to improve energy efficiency, in this paper, we propose a new cluster formation algorithm. In this algorithm, we define a intra cluster as the sensor nodes within close proximity of each other. In a intra cluster, a node senses and transmits data at a time on the round-robin basis. In a view of whole network, intra cluster is treated as one node. During the setup phase of a round, intra clusters are formed first and then they are re-clustered(network cluster) by choosing cluster-heads(intra clusters). In the intra cluster with a cluster-head, every member node plays the role of cluster-head on the round-robin basis. Hence, we can lengthen periodic round by a factor of intra cluster size. Also, in the steady-state phase, a node in each intra cluster senses and transmits data to its cluster-head of network cluster on the round-robin basis. As a result of analysis and comparison, our scheme reduces energy consumption of nodes, and improve the efficiency of communications in sensor networks compared with current clustering methods.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.6
• /
• pp.9-17
• /
• 2012

High-quality multimedia on the Internet has attracted attention because of its wide application area. IP multicast has been proposed as a solution to use efficient network resources in these services. However, IP multicast has not been commonly used due to a number of practical issues such as security and management. As an alternative, an overlay multicast routing which is performed in upper protocol layers on legacy networks without changing hardware has been presented. Yet, the maximum data transmission capacity of the overlay multicast is not sufficient for real time transmission of multimedia data. In this paper, we have implemented an overlay multicast engine on NetFPGA which allows us to perform packet replication and tunneling which need high-speed. In addition, we have implemented extra portions which need low-speed in software. From now on, we will progress research which increase the number of terminal spots which can be replicated by improvement and amplify throughputs by optimization.

• Journal of Digital Contents Society
• /
• v.17 no.3
• /
• pp.111-118
• /
• 2016

Proxy mobile IPv6 (PMIPv6), which is a centralized mobility management protocol, are dependent on a local mobility anchor (LMA) to process all control and data traffics. Therefore, it has serious problems such as the tremendous traffic concentration into the core network and the triangle routing. In this paper, therefore, in order to alleviate these drawbacks, we propose a PMIPv6-based enhanced distributed mobility management scheme considering a user's traffic locality. Performance evaluation results indicate that in most cases, except for when a user's mobility rate is relatively very higher than the traffic rate, the proposed scheme shows better performance result than that of PMIPv6. Besides, it is demonstrated that the proposed scheme can be an effective alternative that can distribute the significant loads on the LMA of the core networks to the MAGs of the edge networks.