• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.5
• /
• pp.708-720
• /
• 1993

The new preventive control mechanisms for traffic management in BISDN/ATM networks can be divided into Connection Admission Control(CAC), Usage Parameter Control (UPC), and Priority Control. Of these mechanism, Usage Parameter Control continuously monitors the parameters admitted in the network's entry point to guarantee quality of service of connections already admitted. Upon detecting traffic that violates the negotiated parameter, it takes the necessary control measures to prevent congestion. Among these traffic control methods, this paper focuses on the Usage Parameter Control method, and proposes and designs GRACE-LB(Guaranteed Rate Acceptance & Control Element-using Leaky Bucket) which improves upon existing UPC models. GRACE-LB modifies the previous LB model by eliminating the cell buffer, dividing the token Pool into two pools, Long-term pool, Short-term pool, and changing the long-term token generating form using 'Cycle Token' into the same bursty form as the traffic source. Through this, GRACE-LB achieves effective control of the Average Bit Rate(ABR) and burst duration of bursty multimedia traffic which previous LB models found difficult to control. Also, since GRACE-LB can e implemented using only simple operations and there are no cell buffers in it, it has the merit of being easily installed at any place.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.4
• /
• pp.41-49
• /
• 2010

This paper proposes a new high speed SHA-1 architecture using multiple unfolding and pre-computation techniques. We unfolds iterative hash operations to 2 continuos hash stage and reschedules computation timing. Then, the part of critical path is computed at the previous hash operation round and the rest is performed in the present round. These techniques reduce 3 additions to 2 additions on the critical path. It makes the maximum clock frequency of 118 MHz which provides throughput rate of 5.9 Gbps. The proposed architecture shows 26% higher throughput with a 32% smaller hardware size compared to other counterparts. This paper also introduces a analytical model of multiple SHA-1 architecture at the system level that maps a large input data on SHA-1 block in parallel. The model gives us the required number of SHA-1 blocks for a large multimedia data processing that it helps to make decision hardware configuration. The hs fospeed SHA-1 is useful to generate a condensed message and may strengthen the security of mobile communication and internet service.

• Journal of Engineering Education Research
• /
• v.10 no.3
• /
• pp.79-92
• /
• 2007

To enhance the excellence, effectiveness and economical efficiency in the learning process, we implement a hybrid educational system for engineering experiments where web-based virtual laboratory systems and distance education systems are properly integrated. In the first stage, we designed client/server distributed environment and developed web-based virtual laboratory systems for digital systems and electrical/electronic circuit experiments. The proposed virtual laboratory systems are composed of four important sessions and their management system: concept learning session, virtual experiment session, assessment session. With the aid of the management system every session is organically tied up together to achieve maximum learning efficiency. In the second stage, we have implemented efficient and cost-effective distant laboratory systems for practicing electric/electronic circuits, which can be used to eliminate the lack of reality occurred during virtual laboratory session. The use of simple and user-friendly design allows a large number of people to access our distant laboratory systems easily. Thus, self-guided advanced training is available even if a lot of expensive equipment will not be provided in the on-campus laboratories. The proposed virtual/distant laboratory systems can be used in stand-alone fashion, but to enhance learning efficiency we integrated them and developed a hybrid educational system for engineering experiments. Our hybrid education system provides the learners with interactive learning environment and a new approach for the delivery of engineering experiments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.745-755
• /
• 2017

University campuses try to satisfy students' demands. Therefore, the physical environment of university campuses keeps changing. Due to the increasing the number of students and shortage of school building facilities, it is necessary to improve the facilities and create new space in the campus, in order to solve this problem and improve the universities. At the moment, the learning method of university students is evolving toward discussion sessions involving fellow students and presentations utilizing multimedia facilities. In response to these changes, a new type of independent space has appeared, which is called the Group Study Room. In this study, we analyze the spatial characteristics of the Group Study Room. Also, through an IPA(Importance Performance Analysis), this study tries to examine the relationship between the spatial characteristics and users' satisfaction. This analysis is expected to reveal the importance of the spatial characteristics of the group study rooms from the users' point of view. This research can be used for facility planning in universities in the future. The primary aim of this study is to analyze the physical environment of the Group Study Rooms of K university. The secondary aim of this study is to manifest the characteristics of these new learning spaces and to check the space elements of the group study rooms for the sake of efficient planning and management.

• Journal of Broadcast Engineering
• /
• v.17 no.4
• /
• pp.584-595
• /
• 2012

Recently, 3D stereoscopic video and HTTP adaptive streaming technologies have received a lot of attention from relevant industrial fields and markets in terms of multimedia contents and delivery services, respectively. It is expected that promising and marketable service models can be created by means of these noticeable two technologies. However, current standard specifications do not provide a method for organized connection between those two technologies. 3D stereoscopic video services are weighted in broadcasting and storage services that are only available under environments in which the network bandwidth is guaranteed or free. Also, HTTP adaptive streaming technologies only provide plain 3D service methods that are dependent on particular Codec. Therefore, this paper proposes 3D video delivery format for HTTP adaptive streaming service which enables stable and seamless display for various stereoscopic video sequences over internet networks. The proposed technology is designed on the basis of Stereoscopic Video Application Format which is a service-oriented standard specification for storing stereoscopic video sequences. Also, this delivery format is directly applicable over DASH that is the representative standard technology for HTTP adaptive streaming services. The delivery format proposed in this paper has been submitted to MPEG and it has been accepted as a working draft, thus it expected to pave the way for practical industrialization in relevant fields from now on.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.11_12
• /
• pp.629-638
• /
• 2005

In the System on a Chip design, the on chip bus is one of the critical factors that decides the overall system performance. Especially, in the case or reusing the IPs such as processors, DSPs and multimedia IPs that requires higher bandwidth, the bandwidth problems of on chip bus are getting more serious. Recently ARM proposes the Multi-Layer AHB BusMatrix that is a highly efficient on chip bus to solve the bandwidth problems. The Multi-Layer AHB BusMatrix allows parallel access paths between multiple masters and slaves in a system. This is achieved by using a more complex interconnection matrix and gives the benefit of increased overall bus bandwidth, and a more flexible system architecture. However, there is one clock cycle delay for each master in existing Multi-Layer AHB BusMatrix whenever the master starts new transactions or changes the slave layers because of the Input Stage and arbitration logic realized with Moore type. In this paper, we improved the existing Multi-Layer AHB BusMatrix architecture to solve the one clock cycle delay problems and to reduce the area overhead of the Input Stage. With the elimination of the Input Stage and some restrictions on the arbitration scheme, we tan take away the one clock cycle delay and reduce the area overhead. Experimental results show that the end time of total bus transaction and the average latency time of improved Multi-Layer AHB BusMatrix are improved by $20\%\;and\;24\%$ respectively. in ease of executing a number of transactions by 4-beat incrementing burst type. Besides the total area and the clock period are reduced by $22\%\;and\;29\%$ respectively, compared with existing Multi-layer AHB BusMatrix.

• Annual Conference of KIPS
• /
• 2000.10a
• /
• pp.677-680
• /
• 2000

웹이 등장하면서 지금까지 인터넷 상에서 텍스트와 이미지를 이용하여 정보를 표현하고 전달하는 방법이 가장 많이 사용되어왔다. 그러나 웹 관련 기술의 비약적인 발달과 네트워크 속도의 증가 및 인터넷의 급속한 보급으로 단순한 텍스트와 이미지 중심의 HTML 문서를 이용한 정보의 전달이 아닌 멀티미디어 데이터를 이용한 정보의 표현과 전달이 점차 증대되고 있다. 이에 따라 멀티미디어 데이터를 전송하기 위한 스트리밍 프로토콜도 등장하였다. 최근에는 컴퓨터의 성능 증가 및 네트워크 속도의 증가(초고속 통신 서비스의 보급)에 의해 멀티미디어 데이터의 전송이 가능하게됨으로써 기존의 공중파나 CATV 방송국의 형태 지니고 인터넷 상에서 실시간 생방송 서비스와 VOD(Video On Demand) 서비스를 제공하는 인터넷 방송국이 급속하게 생겨나고 있다.[11] 인터넷 방송은 동영상과 오디오의 실시간 전달을 가능하게 하는 멀티미디어 스트리밍 기술과 멀티미디어를 실시간으로 전송할 수 있는 실시간 전송 프로토콜을 기반으로 발전하고 있다. 인터넷 상에서 멀티미디어 스트리밍 서비스를 하는 대부분의 인터넷 방송은 스트리밍 서버로서 RealNetworks사의 RealSystem과 Microsoft사의 WMT(Windows Media Technologies)를 사용하고 있다. 본 논문은 Real Server와 WMT의 비교 분석을 통해 실시간 전송 프로토콜을 지원하고, 멀티미디어 스트리밍 기술을 지원하는 자바를 기반으로 한 분산 서버 구조의 스트리밍 서버, 서버간의 부하를 제어하는 미들웨어, 멀티미디어 스트림을 재생할 수 있는 클라이언트를 설계하고 구현한다. 방법에 대해서 자세히 살펴보고 실제 SQL Server 7.0 환경에서 구축된 공간 엔진 및 OLE DB 제공자 컴포넌트의 구현 예에 대하여 살펴볼 것이다. 혈액내방사선 조사량이 안전용량 범위(200rad)에 속하며 48시간 후 체내잔류량은 서양인과 큰 차이가 없었다.비출현의 소견을 보이는 악성종양 환자의 골 신티그람 53개중 44개 (83.0%)에서 척추 및 늑골에 미만성, 또는 다발성 침습이 관찰되었다. 또 골전이 부위를 두개골, 척추, 견대부, 늑골, 골반, 사지의 근위부 장골의 6개 부위로 나누어 분석할 경우 49개(92.5%)에서 3부위 이상에 전이가 발견되었고, 35개(66.0%)에서 4부위 이상에 전이가 발견되었으며, 5부위 이상, 6개 부위에 모두 전이가 발견된 것은 각각 20개 (37 7%), 11개(20.8%)이었다. 이상의 성적으로 보아 악성종양 환자의 골 신피그라피에서 신장 영상의 비출현은 종양의 광범위한 골전이를 간접적으로 시사하는 소견으로 생각된다. 여러 악성종양중 전립선암에서 신장 영상 비출현의 빈도가 가장 높았으며, 특히 위암에서 골전이 및 신장 영상 비출현의 빈도가 높음은 주목할 만한 것이라 하겠다.출한 결과 인,규소 증가와 자가영양성 미소플랑크톤(ANP)증가에 미치는 요인이 해안과 외해에서 동일하게 가장 큰 설명력을 보였다. N:P 비도 해안에서 36.4, 외해에서 32.6을 보이고 있어 인이 상당히 부족한 것으로 나타났다. 따라서 조사해역은 인이 식물플랑크톤 성장에 중요한 제한요인으로 작용하고 있다고 판단된다.의 회전. 전위력의 강도, 적용시점, 그리고 키, 체중등의 신체적 요인 등이 있으나 능숙한 기계사

• Journal of Korean Society for Geospatial Information Science
• /
• v.6 no.1 s.11
• /
• pp.11-17
• /
• 1998

Recently, 3D GIS based on 3D geo-processing methodology and Internet environment are emerging issues in GIS fields. To design and implement 3D GIS, the strategic linkage of Java and VRML is first regarded: 3D feature format definition in the passion of conventional GIS including aspatial attributes, 3B feature indexing, 3D analytical operators such as selection, buffering, and Near, Metric operation such as distance measurement and statistical description, and 3D visualization. In 3D feature format definition, the following aspects are implemented: spatial information for 3D primitives extended from 2D primitives, multimedia data, object texture or color of VRML specification. DXF-format GIS layers with additional attributes are converted to 3D feature format and imported into this system. While, 3D analytical operators are realized in the form of 3D buffering with respect to user-defined point, line, polygon, and 3D objects, and 3D Near functions; furthermore, 'Lantern operator' is newly introduced in this 3D GIS. Because this system is implemented by Java applet, any client with Java-enable browser including VRML browser plug-in can utilize the new style of 3D GIS function in the virtual space. Conclusively, we present prototype of WWW-based 3D GIS, and this approach will be contribute to development of core modules on the stage of concept establishment and of real application model in future.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.1
• /
• pp.100-108
• /
• 2003

By choosing Multicast for transmission of educational contents in the Remote Educational System, we can reduce the server load and increase network bandwidth utilization. We design and implement Multicast Middleware for the Remote Educational System in this paper. There are three characteristics in this Multicast Middleware: 1) Through Centralized Multicast Group Management for passive members, it allows a host to make multicast group, which is composed of receivers, called Group Member and who are chosen by the host, called group Maker. Because, all groups are created by the Group Maker in Centralized Group Management, Group Member's join action will be passive 2) Maintenance and recovery of multicast group information in order to restore from exception and crash; the maintenance and recovery mechanism of Group Maker is distinct from that of Group Member. 3) The mechanism which enables to transmit large size multimedia data through multicasting and remove additional copy operation through shared buffer. Fragmentation/de-fragmentation for large data delivery results in additional copy operation in user level. But by using user level shared buffer, it can be done without user Bevel copy operation. By applying to Remote Educational environment which consists of 30 PCs and Fast Ethernet, we can examine the efficiency of this middleware, which can transmit 18frames/sec movie which resolution 320 $\times$ 120 pixels, 128Kbps encoded sound data and some text data.

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.4
• /
• pp.426-439
• /
• 1999

본 논문에서는 웹(World Wide Web)에서 사용자가 손쉽고 편리하게 이용할 수 있는 멀티미디어 대중교통 안내시스템 개발 경험을 소개한다. 개발된 시스템은 클라이언트와 서버 시스템, 경로탐색 시스템, 교통정보 저장 시스템, 노선 및 정류장 관리 시스템으로 구성되어 있다. 클라이언트에서 작동되는 사용자 인터페이스는 직관적으로 이해가 쉽고, 사용이 편리하며 인터액티브한 멀티미디어 대중 교통안내 서비스를 제공한다. 서버 시스템은 교통정보 수집 시스템으로부터 입력되는 데이타와, 경로탐색 시스템, 교통정보 저장 시스템과 연동되어 클라이언트의 요구사항을 처리하고 그 결과를 사용자에게 돌려준다. 수정된 A* 알고리즘을 이용하는 경로탐색 시스템은 최적경로를 탐색하며, 교통정보 저장 시스템은 현재 교통상황, 정류장, 노선, 지도 등의 정보를 저장한다. 노선 및 정류장 관리시스템은 시스템 관리자가 노선 또는 정류장 관리를 서버 화면의 지도상에서 효율적으로 수행할 수 있는 도구이다. 본 논문에서 다루는 대중교통 안내시스템은 Java로 구현하였기 때문에 확장과 이식이 용이하며, 시스템 유지보수 비용이 적게 드는 장점을 가지고 있다. 그리고, 웹 브라우저가 동작되는 환경에서는 어디서나 쉽게 접근이 가능하며 향후 구축될 Intelligent Transportation Systems(ITS)의 한 모듈로써 바로 작동될 수 있을 뿐만 아니라, 현재 인터넷상에서 제공되는 다양한 서비스와도 연동이 가능하다.Abstract This paper introduces our experience for developing a public transportation guidance system, which facilitates the World-Wide Web(WWW) to provide users with easier access and use. The proposed system is composed of four subsystems: client/server system, path search system, traffic data storage system, and traffic raw-data management system. The user interface in clients utilizes Java to furnish users with multimedia data accessibility and interactivity. The server processes clients' requests based on the traffic data coming from remote sensing devices and interacts with the path search system and traffic data storage system to provide users with the results. The path search system, which uses a modified A* algorithm, produces optimal solutions based on dynamic traffic data. The traffic data storage system stores the current traffic information together with the geographical information about the b$us_way routes. The traffic raw-data management system is a graphical user interface which enables the system manager to handle the traffic information easily on the map in the terminal screen. The system has considerable benefits such as portability, scalability, and flexibility since it is implemented using Java. Also, it can be extended to an integrated Intelligent Transportation Systems(ITS) which includes a variety of information on the Internet as well as traffic information.n.