• 대한기계학회논문집A
• /
• 제33권9호
• /
• pp.892-902
• /
• 2009

An efficient sequential optimization approach for metamodel was presented by Choi et al. This paper describes a new approach of the multilevel optimization method studied in Refs. [2] and [20,21]. The basic idea is concerned with multilevel iterative methods which combine a descent scheme with a hierarchy of auxiliary problems in lower dimensional subspaces. After fitting a metamodel based on an initial space filling design, this model is sequentially refined by the expected improvement criterion. The advantages of the method are that it does not require optimum sensitivities, nonlinear equality constraints are not needed, and the method is relatively easy to understand and use. As a check on effectiveness, the proposed method is applied to an engineering example.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1198-1203
• /
• 2008

An efficient sequential optimization approach for metamodel was presented by Choi et al [6]. This paper describes a new approach of the multilevel optimization method studied in Refs. [5] and [21-25]. The basic idea is concerned with multilevel iterative methods which combine a descent scheme with a hierarchy of auxiliary problems in lower dimensional subspaces. After fitting a metamodel based on an initial space filling design, this model is sequentially refined by the expected improvement criterion. The advantages of the method are that it does not require optimum sensitivities, nonlinear equality constraints are not needed, and the method is relatively easy to understand and use. As a check on effectiveness, the proposed method is applied to a classical cantilever beam.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1537-1543
• /
• 2014

This paper presents a new DC/AC multilevel converter. This configuration uses single DC sources. The proposed converter has two stages. The first stage is a DC/DC converter that can produce several DC-links in the output. The DC/DC converter is one type of boost converter and uses single inductor. The second stage is a multilevel inverter with several capacitor links. In this paper, one single input multi output DC-DC converter is used in order to voltage balancing on multilevel converter. In addition, as compare to traditional multilevel inverter, presented DC/AC multilevel converter has less on-state voltage drop and conduction losses. Finally, in order to verify the theoretical issues, simulation and experimental results are presented.

• Journal of Power Electronics
• /
• 제14권2호
• /
• pp.302-314
• /
• 2014

Due to advancements in power electronics and inverter topologies, the current controlled multilevel voltage-source pulse width modulated (PWM) inverter is usually preferred for accurate control, quick response and high dynamic performance. A multilevel topology approach is found to be best suited for overcoming many problems arising from the use of high power converters. This paper presents a comprehensive review and comparative study of several current control (CC) techniques for multilevel inverters with a special emphasis on various approaches of the hysteresis current controller. Since the hysteresis CC technique poses a problem of variable switching frequency, a ramp-comparator controller and a predictive controller to attain constant switching frequency are described along with its quantitative comparison. Furthermore, various methods have been reviewed to achieve hysteresis current control PWM with constant switching frequency operation. This paper complies various guidelines to choose a particular method suitable for application at a given power level, switching frequency and dynamic response.

• Journal of Power Electronics
• /
• 제16권6호
• /
• pp.2067-2075
• /
• 2016

Cascaded H-bridge multilevel inverters are currently used because it enables the integration of various sources, such as batteries, ultracapacitors, photovoltaic array and fuel cells in a single system. Conventional modulation schemes for multilevel inverters have concentrated mainly on the generation of a low harmonic output voltage, which results in less effective utilization of connected sources. Less effective utilization leads to a difference in the charging/discharging of sources, causing unsteady voltages over a long period of operation and a reduction in the lifetime of the sources. Hence, a charge balance control scheme has to be incorporated along with the modulation scheme to overcome these issues. In this paper, a new approach for charge balancing in symmetric cascaded H-bridge multilevel inverter that enables almost 100% charge balancing of sources is presented. The proposed method achieves charge balancing without any additional stages or complex circuit or considerable computational requirement. The validity of the proposed method is verified through simulation and experiments.

• Coupled systems mechanics
• /
• 제1권3호
• /
• pp.269-283
• /
• 2012

In the present paper, a multilevel approach for the local nanobuckling analysis of carbon nanotube (CNT) based composite materials is proposed and described. The approach comprises four levels, all of them at nanoscale. The first level aims to propose the potential that describes the interatomic forces between carbon atoms. In the second level, molecular dynamics simulations are performed to extract the elastic properties of the CNT. The third level aims to determine the stiffness of the material that surrounds the CNT (matrix), using the annular membrane analysis. In the fourth level, finite strip analysis of the CNT elastically restrained by the matrix is performed to calculate the critical strain at which the CNT buckles locally. In order to achieve accurate results and take the CNT-matrix interaction into account, the $3^{rd}$ and $4^{th}$ steps may be repeated iteratively until convergence is achieved. The proposed multilevel approach is applied to several CNTs embedded in a cylindrical representative volume element and illustrated in detail. It shows that (i) the interaction between the CNT and the matrix should be taken into account and (ii) the buckling at nanoscale is sensitive to several types of local buckling modes.

• Journal of Electrical Engineering and Technology
• /
• 제10권6호
• /
• pp.2277-2287
• /
• 2015

In recent times, multilevel inverters are given high priority in many large industrial drive applications. However, the reliability of multilevel inverters are mainly affected by the failure of power electronic switches. In this paper, open-switch and short-switch failure of multilevel inverters and its identification using a high performance diagnostic system is discussed. Experimental and simulation studies were carried out on five level cascaded H-Bridge multilevel inverter and its output voltage waveforms were analyzed at different switch fault cases and at different modulation index values. Salient frequency domain features of the output voltage signal were extracted using the discrete wavelet transform multi resolution signal decomposition technique. Real time application of the proposed fault diagnostic system was implemented through the LabVIEW software. Artificial neural network was trained offline using the Matlab software and the resultant network parameters were transferred to LabVIEW real time system. In the proposed system, it is possible to precisely identify the individual faulty switch (may be due to open-switch (or) short-switch failure) of multilevel inverters.

• 감성과학
• /
• 제19권4호
• /
• pp.95-110
• /
• 2016

본 연구의 목적은 다층자료 매개효과의 분석 방법을 제안하는 것이다. 연구내용은 다층자료 매개효과의 통계방법 탐색, 분석절차 제안, 그리고 분석의 실례 제시 등 세 가지다. 첫째, MLM (multilevel modeling)과 MSEM (multilevel structural equation modeling) 중에서 어떤 방법이 다층자료의 매개효과 분석에 유용한지 탐색하였다. MSEM은 MLM의 약점을 극복한 것으로서 유용한 다층 매개효과 분석방법이었다. 둘째, 다층자료 매개효과의 분석절차를 연구모형설정, 전제조건 검토, 모형검증, 계수검증의 4단계로 전개하였다. 셋째, 매개효과 분석의 실례에 사용된 자료는 2,695명의 초중등 학생과 88명의 학급교사로 구성되었다. 분석 실례로 2층${\rightarrow}$2층${\rightarrow}$1층과 1층${\rightarrow}$1층${\rightarrow}$2층 두 가지를 제시하였다. 2층${\rightarrow}$2층${\rightarrow}$1층과 1층${\rightarrow}$1층${\rightarrow}$2층 모형은 완전매개모형이 지지되었지만, 2층${\rightarrow}$2층${\rightarrow}$1층 모형의 매개효과 계수만 95% 신뢰구간에서 유의하였다. 분석 실례에 사용된 Mplus 프로그램은 부록에 제시하였다. 연구결과를 기초로 본 연구의 의의와 제한점, 그리고 후속연구의 방향이 논의되었다.

• Journal of Power Electronics
• /
• 제13권5호
• /
• pp.787-797
• /
• 2013

Despite the advantages offered by multilevel inverters, one of the main drawbacks that prevents their widespread use is their circuit complexity as the number of power switches employed is usually high. This paper presents a new multilevel inverter topology with a considerable reduction in the number of power switches used through the switch-sharing approach. The fact that the proposed inverter applies two bidirectional power switches for sharing among the three phases does not prevent it from producing seven levels in the line-to-line output voltage waveforms. A modified scheme of space vector modulation via the application of virtual voltage vectors is developed to generate the PWM signals of the power switches. The performance of the proposed inverter is investigated through MATLAB/SIMULINK simulations and is practically tested using a laboratory prototype with a DSP-based modulator. The results demonstrate the satisfactory performance of the inverter and verify the effectiveness of the modulation method.

• 대한토목학회논문집
• /
• 제31권3D호
• /
• pp.469-476
• /
• 2011

본 연구는 다층모형(multilevel model)을 상수원관리지역 주민지원사업 정책평가에 활용하는데 있어 유효성 및 효과를 이해하는데 연구의 목적이 있다. 정책의 대상이 위계적인(hierarchical) 특성을 지니고 있는 경우 다층모형을 이용하여 정책평가를 하는 것이 정책의 효과를 평가하고 검증하는데 있어 적절하다. 또한 이 모형은 기존 평가결과의 재평가 등에 응용될 수 있다. 상수원관리지역의 주민지원사업을 대상으로 주민만족도와 경제적 도움정도를 정책효과변수로 하여 다층모형을 적용 하였다. 그 결과 정책효과변수에 기존 평가결과 및 중요한 사업으로 여겨지던 소득증대사업 등이 직접적인 영향을 미치지 못함을 통계적으로 확인할 수 있었다. 본 연구는 다음과 같은 세 가지의 정책적 함의를 지닌다. 첫째, 정책 및 사업평가에 있어 정책의 효과를 엄밀히 파악하기 위하여 위계적 구조를 고려할 수 있는 다층모형을 이용하여야 한다. 둘째, 기관평가의 순위 도출에 있어 다층모형을 이용하여 지표에 의한 성과지표와 보완적으로 이용해야 한다. 셋째, 위계적 구조의 하나로서 공간적 위계를 고려하여 정책평가를 시행하여야 한다.