• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.1244-1246
• /
• 1998

This paper present a variety fault problem brought out with the multifunctional Battery Energy Storage System [MBESS] expected to be practical in the short future interconnected to power distribution system. Multifunctional BESS model and interconnection model to power system is simply configured, the problems of protection coordination and operation is studied. A line fault in the power distribution system are discussed such as line to ground and three phase fault in order to show the impact on power utilities, demand-side and BESS-side. In order to simulate a variable transient phenomenon due to 2 the BESS interconnection operation to power distribution system, in this paper, PSCAD/EMTDC simulation tools is used.

• Smart Structures and Systems
• /
• 제6권5_6호
• /
• pp.689-709
• /
• 2010

In this paper, a low cost, low power but multifunctional wireless sensor node is presented for the impedance-based SHM using piezoelectric sensors. Firstly, a miniaturized impedance measuring chip device is utilized for low cost and low power structural excitation/sensing. Then, structural damage detection/sensor self-diagnosis algorithms are embedded on the on-board microcontroller. This sensor node uses the power harvested from the solar energy to measure and analyze the impedance data. Simultaneously it monitors temperature on the structure near the piezoelectric sensor and battery power consumption. The wireless sensor node is based on the TinyOS platform for operation, and users can take MATLAB$^{(R)}$ interface for the control of the sensor node through serial communication. In order to validate the performance of this multifunctional wireless impedance sensor node, a series of experimental studies have been carried out for detecting loose bolts and crack damages on lab-scale steel structural members as well as on real steel bridge and building structures. It has been found that the proposed sensor nodes can be effectively used for local wireless health monitoring of structural components and for constructing a low-cost and multifunctional SHM system as "place and forget" wireless sensors.

• 한국농촌건축학회논문집
• /
• 제18권3호
• /
• pp.9-16
• /
• 2016

This study aimed to clarify the multifunctional services and space composition in the process of developing a multifunctional long-term care program in small elderly care facilities in Japan. We collected data about multifunctional long-term care at small facilities from the Community Life Support Center (CLC), a Japanese non-profit corporation, and conducted an interview survey of the members of the CLC's secretariat in 2014. Furthermore, we selected 3 Japanese pioneering care facilities (known as takurosho), and conducted interview surveys and data collection to clarify in detail the space composition and process of development of multifunctional long-term care at small facilities. Four distinct results were found. First, the facilities had gradually increased non-institutional services, including visitation, overnight stays, and long-term stays, to fit the needs of users and their families. Secondly, in the 1990s, they could offer both non-institutional and institutional services at the same facility, but after the long-term care insurance system began in 2000, non-institutional long-term stay services were not allowed. Third, the facilities had built extensions or extra rooms in response to increases in multifunctional services and users. These rooms had common characteristics, with sitting rooms at the center of the facility. Lastly, the maximum number of service users at each of the 3 facilities was limited to 15, to maintain a small scale. However, as the size of facilities was increased through building extensions or remodeling, the overall amount of area available to users increased.

• 한국가구학회지
• /
• 제28권1호
• /
• pp.16-26
• /
• 2017

In today's aging society, stable residential environment is essential for the elderly living alone to be able to do activities of daily living without restrictions and cherish a satisfactory quality of life. We developed a safe and convenient multifunctional sofa by removing complex combinations and decomposing processes of the multifunctional transformable furniture, appropriate for the use by elderly living alone. We deduced the 4 main keywords and details related to the purpose of sofa by analyzing the users' physical and mental characteristics through literature review and by using 24-hour scheduling, interviews, and actual measurement. Finally, by applying this to furniture planning, we designed 4 different types of multifunctional sofa system. Production was done in cooperation with AND Co. for 2 weeks using materials, colors and adhesives selectively chosen with careful consideration of their effects on the physical, mental aspects of the user to give optimal comfortability.

• Journal of Power Electronics
• /
• 제14권2호
• /
• pp.324-340
• /
• 2014

Recent developments in power electronics technology have spurred interest in the use of renewable energy sources as distributed generation (DG) generators. The key component in DG generators is a grid-connected inverter that serves as an effective interface between the renewable energy source and the utility grid. The multifunctional inverter (MFI) is special type of grid-connected inverter that has elicited much attention in recent years. MFIs not only generate power for DGs but also provide increased functionality through improved power quality and voltage and reactive power support; thus, the capability of the auxiliary service for the utility grid is improved. This paper presents a comprehensive review of the various MFI system configurations for single-phase (two-wire) and three-phase (three- or four-wire) systems and control strategies for the compensation of different power quality problems. The advances in practical applications and recent research on MFIs are presented through a review of nearly 200 papers.

• Smart Structures and Systems
• /
• 제12권1호
• /
• pp.23-39
• /
• 2013

In this article, a smart multifunctional optical system-on-a-chip (SOC) sensor platform is presented and its application for fiber Bragg grating (FBG) sensor interrogation in optical sensor networks is investigated. The smart SOC sensor platform consists of a superluminescent diode as a broadband source, a tunable microelectromechanical system (MEMS) based Fabry-P$\acute{e}$rot filter, photodetectors, and an integrated microcontroller for data acquisition, processing, and communication. Integrated with a wireless sensor network (WSN) module in a compact package, a smart optical sensor node is developed. The smart multifunctional sensor platform has the capability of interrogating different types of optical fiber sensors, including Fabry-P$\acute{e}$rot sensors and Bragg grating sensors. As a case study, the smart optical sensor platform is demonstrated to interrogate multiplexed FBG strain sensors. A time domain signal processing method is used to obtain the Bragg wavelength shift of two FBG strain sensors through sweeping the MEMS tunable Fabry-P$\acute{e}$rot filter. A tuning range of 46 nm and a tuning speed of 10 Hz are achieved. The smart optical sensor platform will open doors to many applications that require high performance optical WSNs.

• Journal of Magnetics
• /
• 제21권4호
• /
• pp.616-621
• /
• 2016

This paper presents a new multifunctional active guidewire system for medical applications that uses a magnetic microrobot. The study demonstrated that the proposed microrobot system could swim and be controlled under Low-Reynolds-number (Re) environments in blood vessel models. The prototype of the robotic guidewire, which is driven within a three-axis Helmholtz coil system, consists of a guide-wire, spiral blade, drilling tip, and permanent magnet. The spiral-type microrobot showed stable active locomotion between 3 kA/m and 9.1 kA/m under driving frequency up to 70 Hz in a silicone oil (of viscosity 1000 cst). The microrobot produced a maximum moving velocity of $8.08{\times}10^{-3}m/s$ at 70 Hz and 9.1 kA/m. In particular, the robotic guidewire produced 3D locomotion with drilling in the three-axis Helmholtz coil system. We verified active locomotion, towing of guidewire, steering, and drilling of the proposed robotic guidewire system through experimental analyses.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.186-186
• /
• 2015

We have introduced multifunctional ITO single thin films formed by normal sputtering system equipped with a plasma limiter which effectively blocks the bombardment of energetic negative oxygen ions. MFSS ITO also possesses high gas diffusion barrier properties simultaneously low resistivity even it deposited at room temperature without post annealing on plastic substrate. Nano-crystalline enhancement by Ar energy has energy window from 20 to 30 eV under blocking NOI condition. Effect of blocking NOI and optimal Ar energy window enhancement facilitate that resistivity is minimized to $3.61{\times}10^{-4}{\Omega}cm$ and the WVTR of 100 nm thick MFSS ITO is $3.9{\times}10^{-3}g/(m^2day)$ which is measured under environmental conditions of 90% relative humidity and 50oC that corresponds to a value of ${\sim}10^{-5}g/(m^2day)$ at room temperature. The multifunctional MFSS ITO with low resistivity, and low gas permeability will be highly valuable for plastic electronics applications.

• Journal of Information Processing Systems
• /
• 제14권5호
• /
• pp.1272-1285
• /
• 2018

The paper presents a novel embedded multifunctional media sever (EMMS) for mobile devices to receive various media programs. Being different from other contemporary system research, the paper mainly studies how to design a reception solution for terrestrial digital television (DTV) on mobile devices and how to enable mobile devices can receive DTV program, enjoy video-on-demand (VOD), achieve video surveillance and relay Internet video program via local Wi-Fi simultaneously. In the system design, we integrate broadcasting-terrestrial DTV tuner, streaming media re-transmission system, VOD disk, video camera and access interface to the Internet into EMMS, which can either receive terrestrial DTV radio signals and demodulate out digital transport stream (TS), or can read streaming media bit-stream from VOD disk, surveillance camera or access interface to the Internet. The experimental results show the proposed system is stable and quality-efficient. Comparing with the other systems, the proposed system has the least packet loss rate and response time.

• 마이크로전자및패키징학회지
• /
• 제22권2호
• /
• pp.11-19
• /
• 2015

Since CMOS device scaling has stalled, three-dimensional (3-D) integration allows extending Moore's law to ever high density, higher functionality, higher performance, and more diversed materials and devices to be integrated with lower cost. 3-D integration has many benefits such as increased multi-functionality, increased performance, increased data bandwidth, reduced power, small form factor, reduced packaging volume, because it vertically stacks multiple materials, technologies, and functional components such as processor, memory, sensors, logic, analog, and power ICs into one stacked chip. Anticipated applications start with memory, handheld devices, and high-performance computers and especially extend to multifunctional convengence systems such as cloud networking for internet of things, exascale computing for big data server, electrical vehicle system for future automotive, radioactivity safety system, energy harvesting system and, wireless implantable medical system by flexible heterogeneous integrations involving CMOS, MEMS, sensors and photonic circuits. However, heterogeneous integration of different functional devices has many technical challenges owing to various types of size, thickness, and substrate of different functional devices, because they were fabricated by different technologies. This paper describes new 3-D heterogeneous integration technologies of chip self-assembling stacking and 3-D heterogeneous opto-electronics integration, backside TSV fabrication developed by Tohoku University for multifunctional convergence systems. The paper introduce a high speed sensing, highly parallel processing image sensor system comprising a 3-D stacked image sensor with extremely fast signal sensing and processing speed and a 3-D stacked microprocessor with a self-test and self-repair function for autonomous driving assist fabricated by 3-D heterogeneous integration technologies.