• 제목/요약/키워드: Multicomponent

검색결과 249건 처리시간 0.027초

Multifunctional Thin Film Resistors Prepared by ALD for High-Efficiency Inkjet Printheads

  • Kwack, Won-Sub;Kwon, Se-Hun
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
    • /
    • pp.126-126
    • /
    • 2012
  • In past decades, the themal inkjet (TIJ) printer has been widely used as one of the most well-known digital printing technology due to its low cost, and high printing quality. Since the printing speed of TIJ printers are much slower than that of laser printers, however, there has been intensive efforts to raise the printing speed of TIJ printers. One of the most plausible methods to raise the printing speed of TIJ printers is to adopt a page-wide array TIJ printhead. To accomplish this goal, the high efficiency inkjet heating resistor films should be developed to settle the high power consumption problem of a page-wide array TIJ printhead. In this study, we investigated noble metal based multicomponent thin film resistor films prepared by atomic layer deposition (ALD) for a high efficiency inkjet printhead. Design concept, preparation, material properties of noble metal based multicomponent thin films will be discussed in terms of mutlfunctionality.

  • PDF

Estimation of product compositions for multicomponent distillation columns

  • Shin, Joonho;Lee, Moonyong;Park, Sunwon
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
    • /
    • pp.295-298
    • /
    • 1996
  • In distillation column control, secondary measurements such as temperatures and flows are widely used in order to infer product composition. This paper addresses the design of static estimators using the secondary measurements for estimating the product compositions of the multicomponent distillation columns. Based on the unified framework for the estimator problems, the relationships among several typical static estimators are discussed including the effect of the measured inputs. Design guidelines for the composition estimator using PLS regression are also presented. The estimator based on the guidelines is robust to sensor noise and has a good predictive power.

  • PDF

복소트레이스 분극필터를 이용한 다성분 탄성파자료 신호분리 (Separation of Seismic Signals using a Polarization Filter based on the Complex Trace Analysis Method)

  • 김기영;이소영
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2005년도 공동학술대회 논문집
    • /
    • pp.233-236
    • /
    • 2005
  • 천부 탄성파 탐사 기록에서 신호부를 약화시키는 레일리파를 제거하고, 초동 인지가 어려운 S파 신호를 강화하는 방법을 제시하고자 다성분 복소트레이스 분석법에 기초한 분극 필터를 작성하였다. 이 분극필터의 효율성을 시험하기 위해서 단순한 수평 2층 모델 자료를 유한차분법으로 합성하였다. 그 결과 타원운동을 하는 레일리파가 비교적 잘 제거되고 선형운동의 P파와 S파도 효과적으로 분리됨을 볼 수 있었다.

  • PDF

Preparation of Multicomponent Ceramic Powders by Ultrasonic Spray Pyrolysis

  • Youn, Jeong-Han;Chung, Byung-Joo;Sim, Soo-Man
    • The Korean Journal of Ceramics
    • /
    • 제6권1호
    • /
    • pp.58-63
    • /
    • 2000
  • The preparation of Y-doped $SrZrO_3$powder by ultrasonic spray pyrolysis was investigated as a representative system, in order to produce fine, single phase multicomponent oxide powders. A precursor solution containing metal nitrates, citric acid and ethylene glycol was atomized glycol was atomized with an ultrasonic spray nozzle. Gel particles formed by organic functional groups were pyrolyzed and subsequently calcined at $800^{\circ}C$ to obtain well-crystallized, single perovskite phase. Most of large particles exhibited macroscopic pores and weak agglomeration between primary particles. However, strong agglomeration was observed in the surfaces of large particles. The effect of the microstructures of these particles on size reduction to submicron particles was described.

  • PDF

다성분계 Glass Fiber의 $La_2O_3$ 첨가에 따른 광학적 특성에 관한 연구 (The Study on Optical Properties by Adding $La_2O_3$ in Multicomponent Glass Fiber)

  • 김용호;강원호
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1994년도 추계학술대회 논문집
    • /
    • pp.21-23
    • /
    • 1994
  • By adding La₂O₃ to optical multicomponent glass composition, after making mother glass and core fiber that enable to enlarge the infrared transmittance region, then surveyed the optical properties. Through thermal analysis of the glass abstained by melt-quenching after selecting stable basic composition on devitrification and replace SiO₂ by 4-12wt% La₂O₃. As La₂O₃ increases up to l2wt% transition temperature, refractive index, density, deformation temperature increased, whereas thermal expansion coefficient decreased. As a result of inspectig transmittance in UV/VIS/IR region, visable region indicated the decrease of transmittance by increasing the La₂O₃ and transmittance region was enlarged by increasing the La₂O₃ in IR region. Also, fabricate core fiber at 820℃ and severy the optical loss we could fact that La₂O₃ composition added 12wt% showed the minimum optical loss.

방향족 유기용매의 촉매산화공정에서 이성분계 혼합물의 속도특성 예측 (Kinetics Prediction of Binary Aromatic Solvent Mixtures in Catalytic Oxidation Process)

  • 이승범;윤용수;홍인권;이재동
    • 환경위생공학
    • /
    • 제16권1호
    • /
    • pp.66-71
    • /
    • 2001
  • The objective of this study was to depict the kinetic behavior of the platinum catalyst for the deep oxidation of aromatic solvents and their binary mixtures. The oxidation kinetics of aromatic solvents, which were benzene, toluene and m-xylene, was studied on a 0.5% $Pt/{\gamma}-Al_2O_3$ catalyst. Deep oxidation of binary mixtures, which were 1:1 in volume, was carried out and the inlet concentration was controlled in the range of 133 and 333ppmv. An approach based on the two-stage redox model was used to analysis the results. The deep oxidation conversion of aromatic solvents was inversely proportional to inlet concentration in plug flow reactor. This trend is due to the zeroth-order kinetics with respect to inlet concentration. The kinetic parameters of multicomponent model were independently evaluated from the single compound oxidation experiments. A simple multicomponent model based on two-stage redox rate model made reasonably good predictions of conversion over the range of parameters studied.

  • PDF

다성분계 고분자 블렌드의 Weldline 강도에 관한연구 (A Study on the Weldline Toughness of Multicomponent Polymer blends)

  • 김형수
    • 유변학
    • /
    • 제9권4호
    • /
    • pp.133-139
    • /
    • 1997
  • PC(polycarbonate), SAN(styren-acrylonitrile)공중합체, 그리고 충격 보강제를 근간 으로 하는 다성분계 고분자 블렌드에 대하여 고정된 사출조건에서 블렌드의 조성에 따른 weldline강도의 변화를 조사하였다. 블렌드의 전체적인 함량에 있어서 PC가 그함량이 높아 연속상이 되는 경우가 비교적 높은 weldline강도를 나타내지만 PC함량이 감소함에 따라서 급격한 저하가 발생하여 채-continuity의 성향이 강한 50%부근에서 최소 값을 보였다. PC 함량이 고정되었을 때에는 분산상의 점도가 증가할수록 weldline 강도가 향상되었는데 이는 weldline의 형성 시에 발생하는 분수형 흐름장에 의한 분산상의 배향이 억제되어 외부 응력 에 대하여 균일하게 대응할수 있는 형태학을 유지하는 효과로 설명된다. 충격보강제의 변경 과 상용화제의 적용으로부터 얻은 결과를 종합하여 볼 때 다성분계 고분자 블렌드의 weldline강도는 구성성분간의 상용성 뿐만 아니라 유변학적인 조건이 만족되어야 효과적으 로 향상될수 있다.

  • PDF

Mycobacterium fortuitum의 스테로이드 9${\alpha}$-하이드록실라제의 분리 및 부분정제 (Isolation and Partial Purification of the Steroid 9${\alpha}$-Hydroxylase from Mycobacterium fortuitum)

  • 강희경
    • 약학회지
    • /
    • 제41권5호
    • /
    • pp.638-646
    • /
    • 1997
  • The steroid 9${alpha}$-hydroxylase activity has been detected in cytosol fraction, $100,00{\times}g$ supernatant of cell free extract of Mycobacterium fortuitum. The activity was not linear with protein concentration in the assay suggesting 9${alpha}$-hydroxylase is a multicomponent enzyme. The 9${alpha}$-hydroxylase system was partially purified through fractional saturation of ammonium sulfate, strong anion exchange (Mono Q) column chromatography, gel filtration (Superose 12) column chromatography, and testosterone affinity gel chromatography. Ammonium sulfate 50~60% saturated fraction of the cytosol gave 9${alpha}$-hydroxylase activity. For further purification, the half-saturated ammonium sulfate fraction was applied to Mono Q, Superose 12, or affinity gel column. The purification factors of 9${alpha}$-hydroxylase containing fraction after Mono Q, Superose 12, and affinity gel chromatography was 13, 11, and 17 respectively.

  • PDF

복소트레이스 분극필터를 이용한 다성분 탄성파자료 신호분리 (Separation of Seismic Signals using a Polarization Filter based on the Complex Trace Analysis Method)

  • 김기영;이소영
    • 지구물리
    • /
    • 제8권1호
    • /
    • pp.35-38
    • /
    • 2005
  • 천부 탄성파 탐사 기록에서 신호부를 약화시키는 레일리파를 제거하고, 초동 인지가 어려운 S파 신호를 강화하는 방법을 제시하고자 다성분 복소트레이스 분석법에 기초한 분극필터를 작성하였다. 이 분극필터의 효율성을 시험하기 위해서 단순한 수평 2층 모델 자료를 유한차분법으로 합성하였다. 그 결과 타원운동을 하는 레일리파가 비교적 잘 제거되고 선형운동의 P파와 S파도 효과적으로 분리됨을 볼 수 있었다.

  • PDF