• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 1999년도 1st Korea-Japan Advanced Semiconductor Packaging Technology Seminar
• /
• pp.9-43
• /
• 1999

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.123.1-123.1
• /
• 2005

• 전자공학회논문지A
• /
• 제31A권3호
• /
• pp.28-39
• /
• 1994

We experimented on memory multichip modules to increase the packing density of memory devices and to improve their electrical characteristics. A 128K$\times$8bit SRAM module was made of four 32K$\times$8bit SRAM memory chips. The memory multichip module was constructed on a low-cost double sided PCB(printed circuit boared) substrate. In the process of fabricating a multichip module. we focused on the improvement of its electrical characteristics. volume, and weight by employing bare memory chips. The characteristics of the bare chip module was compared with that of the module with four packaged chips. We conducted circuit routing with a PCAD program, and found the followings: the routed area for the module with bare memory chips reduced to a quarter of that area for module with packaged memory chips. 1/8 in volume, 1/5 in weight. Signal transmission delay times calculated by using transmission line model was reduced from 0.8 nsec to 0.4 nsec only on the module board, but the coupling coefficinet was not changed. Thus, we realized that the electrical characteristics of multichip packages on PCB board be improved greatly when using bare memory chips.

• 한국CDE학회논문집
• /
• 제19권4호
• /
• pp.402-409
• /
• 2014

Presented in this paper is a scheduling method for semiconductor backend process considering the backward pegging. It is known that the pegging for frontend is a process of labeling WIP lots for target order which is specified by due date, quantity, and product specifications including customer information. As a result, it gives the release plan to meet the out target considering current WIP. However, the semiconductor backend process includes the multichip package and test operation for the product bin portion. Therefore, backward pegging method for frontend can't give the release plan for backend process in semiconductor. In this paper, we suggest backward pegging method considering the characteristics of multichip package and test operation in backend process. And we describe the backward pegging problem using the examples.

• 한국산업융합학회 논문집
• /
• 제3권1호
• /
• pp.69-75
• /
• 2000

Multichip packages are comprised of dissimilar materials which expand at different rates on heating. The differential expansion must be accommodated by the various structural elements of the package. A types of heat exposures occur operation cycles. This study presents a finite element analysis simulation of flip-chip among multichip. The effects of geometries and material properties on the reliability were estimated during the analysis of temperature and thermal stress of flip-chip. From the results, it could be obtained that the more significant parameters to the reliability of flip-chip arc chip power cycle, heat convection and height of solder bump.

• Transactions on Electrical and Electronic Materials
• /
• 제15권4호
• /
• pp.221-225
• /
• 2014

Although gold wire bonding techniques have already matured in semiconductor manufacturing, weakly bonded wires in semiconductor chip assembly can jeopardize the reliability of the final product. In this paper, weakly bonded or failed aluminum bonding pads are analyzed using X-ray photoelectron spectroscopy (XPS), Auger electron Spectroscopy (AES), and energy dispersive X-ray analysis (EDX) to investigate potential contaminants on the bond pad. We found the source of contaminants is related to the dry etching process in the previous manufacturing step, and fluorocarbon plasma etching of a passivation layer showed meaningful evidence of the formation of fluorinated by-products of $AlF_x$ on the bond pads. Surface analysis of the contaminated aluminum layer revealed the presence of fluorinated compounds $AlOF_x$, $Al(OF)_x$, $Al(OH)_x$, and $CF_x$.

• 마이크로전자및패키징학회지
• /
• 제5권2호
• /
• pp.21-26
• /
• 1998

대용량, 고속데이터 처리가 요구되는 System 개발은 이들의 복잡하고 고기능의 회 로 구현이 가능하냐에 달려 있고 또한 이들고기능 요구를 가장 잘 만족할수 있는 패키지는 MCM 이라 할 수있다. 시스템의 고속화, 소형화는 회로의 복잡성을 요구하는 있는 이를 패 키지로 구현하는 MCM은 시험성 확보에 심각한 문제점으로 나타나고 있다. 본 논문에서는 고밀도 구조의 MCM 기판에 대한 Interconnetion Line 시험검증을 위한 Flying Prober의 적 용 및 모듈 패키징 공정에 대한 조립성 검증을 위한 BST에 대해 설명한다. 연구에 사용된 MCM 모듈은 MCM-D 공정으로 제작되었으며 31um 신호선폭, 50um Via Hole Dia. 5신호 선층 5절연층 및 455 Net의 기판으로절연층은 Dow chemical의 BCB-4024/4026을 적용하였 다. 조립은 3 ASIC, 24소자 실장 및 2000 Wire Bonding으로 이루어지며 패키지는 방열특성 을 고려한 BGA(491 I /O,50mil pitch)를 개발하여 사용하였다. MCM 기판의미세패턴으로 구성된 Interconnection Line에 대해 Fine Ptich Probing이 가능한 Flying Prober를 사용하 여 평가하였으며 BST를 이용하여 실장소자의 KGD평가 및 능동, 수동소자가 실장된 MCM Package의 조립시험성을 확보할수 있었다.

• 마이크로전자및패키징학회지
• /
• 제6권4호
• /
• pp.61-71
• /
• 1999

통신분야에서 사용주파수대역의 증가, 제품의 소형화 및 가격경쟁력등의 요구에 따라 RF 소자의 패키징 기술도 플라스틱 패키지 대신에 flip chip interconnection, MCM(multichip module)등과 같은 고밀도 실장기술이 발전해가고 있다. 따라서, 본 논문은 최근 수년간 보고된 응용사례를 중심으로 RF flip chip의 기술적인 개발방향과 장점들을 분석하였고, RF 소자 및 시스템의 개발단계에 따른 적합한 적용기술을 제시하였다. RF flip chip의 기술동향을 요약하면, 1) RF chip배선은 microstrip 대신에 CPW 구조을 선택하며, 2) wafer back-side grinding을 하지 않아서 제조공정이 단순하고 wafer 파손이 적어 제조비용을 낮출 수 있고, 3) wire bonding 패키징에 비해 전기적인 특성이 우수하고 고집적의 송수신 모듈개발에 적합하다는 것이다. 그러나, CPW 배선구조의 RF flip chip 특성에 대한 충분한 연구가 필요하며 RF flip chip의 초기 개발 단계에서 flip chip interconnection 방법으로는 Au stud bump bonding이 적합할 것으로 제안한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.139-142
• /
• 2001

As microeletronics technology continues to progress, there is also a continuous demand on highly integration and miniaturization of systems. For example, it is desirable to package several integrated circuits together in multilayer structure, such as multichip modules, to achieve higher levels of compactness and higher performance. Passive components (i.e., capacitors, resistors, and inductors) are very important for many MCM applications. In addition, the low-temperature co-fired ceramic (LTCC) process has considerable potential for embedding passive components in a small area at a low cost. In this paper, we investigate a method of statistically modeling integrated passive devices from just a small number of test structures. A set of LTCC inductors is fabricated and their scattering parameters (5-parameters) are measured for a range of frequencies from 50MHz to 5GHz. An accurate model for each test structure is obtained by using a building block based modeling methodology and circuit parameter optimization using the HSPICE circuit simulator.

• 한국전기전자재료학회논문지
• /
• 제15권4호
• /
• pp.344-348
• /
• 2002

As microelectronics technology continues to progress, there is also a continuous demand on highly integration and miniaturization of systems. For example, it is desirable to package several integrated circuits together in multilayer structure, such as multichip modules, to achieve higher levels of compactness and higher performance. Passive components (i.e., capacitors, resistors, and inductors) are very important fort many MCM applications. In addition, the low-temperature co-fired ceramic (LTCC) process has considerable potential for embedding passive components in a small area at a low cost. In this paper, we investigate a method of statistically modeling integrated passive devices from just a small number of test structures. A set of LTCC inductors is fabricated and their scattering parameters (s-parameters) are measured for a range of frequencies from 50MHz to 5GHz. An accurate model for each test structure is obtained by using a building block based modeling methodology and circuit parameter optimization using the HSPICE circuit simulator.