• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.10
• /
• pp.1-7
• /
• 2020

In this study, a multichannel gas-liquid microextraction system is designed by integrating the automatic elution of extraction line and multichannel gas-purging liquid phase microextraction. The system uses an injection pump and inert gas to push the extraction solvent to a sample bottle of a gas-phase color autosampler and then implements multichannel gas-liquid microextraction and gas chromatography-mass spectrometry. The system also employs a three-way integrated micro-high-temperature heater, syringe pump, and microflow controller to realize the simultaneous processing of multiple groups of samples, thus improving the sample pretreatment speed and reproducibility and reducing human error. Autoinjection experiments were implemented with polycyclic aromatic hydrocarbon standard samples. The experiments show that the average recovery rate of the system exceeds 70%, and the relative standard among the channels is less than 15%.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.580-585
• /
• 1990

This paper presents a real time FECG signal monitoring system in which an adaptive multichannel noise canceller is implemented using a Texas Instruments TMS32020 digital signal processor. Abdominal ECG signal is applied as the desired output and 3 chest ECG signals as the reference input signals of the adaptive multichannel noise canceller whose coefficients are updated using the LMS algorithms.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.2
• /
• pp.89-96
• /
• 2015

In this paper, time-frequency analysis algorithms, empirical mode decomposition and local mean decomposition, are reviewed and their applications to nonlinear and nonstationary real-world data are discussed. In addition, their generic extensions to complex domain are addressed for the analysis of multichannel data. Simulations of these algorithms on synthetic data illustrate the fundamental structure of the algorithms and how they are designed for the analysis of nonlinear and nonstationary data. Applications of the complex version of the algorithms to the synthetic data also demonstrate the benefit of the algorithms for the accurate frequency decomposition of multichannel data.

• ETRI Journal
• /
• v.32 no.6
• /
• pp.921-931
• /
• 2010

It has been shown that the principal subspace-based multichannel Wiener filter (MWF) provides better performance than the conventional MWF for suppressing interference in the case of a single target source. It can efficiently estimate the target speech component in the principal subspace which estimates the acoustic transfer function up to a scaling factor. However, as the input signal-to-interference ratio (SIR) becomes lower, larger errors are incurred in the estimation of the acoustic transfer function by the principal subspace method, degrading the performance in interference suppression. In order to alleviate this problem, a principal subspace modification method was proposed in previous work. The principal subspace modification reduces the estimation error of the acoustic transfer function vector at low SIRs. In this work, a frequency-band dependent interpolation technique is further employed for the principal subspace modification. The speech recognition test is also conducted using the Sphinx-4 system and demonstrates the practical usefulness of the proposed method as a front processing for the speech recognizer in a distant-talking and interferer-present environment.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.455-461
• /
• 2000

A multichannel signal processing algorithm for generating real time virtual sound field was proposed. Evaluation of the system performance was done by an objective function that minimizes the difference between the real and generated signals at each control point. Since impulse responses at the surface of a rigid sphere show characteristics similar to those of real HRTF, a rigid sphere model was adequate to simulate the multichannel sound system. A two-channel system and two four-channel systems were studied with various combinations of source locations and speaker positions. The results show that a two-channel system has its best configuration when the angle spanned by the loudspeakers is less than $60^{\circ}$. In the case of four-channel systems, the overall performance was highly improved with one pair of speakers fixed at an optimal position. Left/right symmetry was a reasonable choice, but the additional front/back symmetry degraded the performance of system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.391-392
• /
• 2012

• Korean Journal of Remote Sensing
• /
• v.5 no.1
• /
• pp.41-56
• /
• 1989

Improvement of the multichannel sea surface temperature(MCSST) software, which had been developed for the purpose of operating under mainframe computer system, was seeked in order to operate effectively in a mini computer system. CPU time and processing time, which is not a major factor under mainframe computer system, become a critical factor in real time image processing under mini computer system. Due to fixed kernel size(3$\times$4) of the old MCSST software, high spatial resolution characteristics of the original image received from satellites were apparently degraded when images are transformed into a cartesian coordinate system after geometrical distortions of the image due to earth curvature are removed. CPU and processing time were reduced to 0.13 and 0.15~0.22 comparing with the old MCSST's, respectively, by applying disk block I/O and M/T queue I/O method under VAX-11/750 computer. The high resolution quality (1.1km in AVHRR) of the processed image was guaranted using 2$\times$2 kernel size and applying moving window techniques without sacrificing CPU and processing time much.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.1
• /
• pp.85-93
• /
• 2007

In case that multichannel blind deconvolution (MBD) applies to signals of which autocorrelation has a high level, separated signals are temporally whitened by diagonal elements of a separation filter matrix. In order to reduce this distortion, the algorithms, which are based on either constraining diagonal elements of a separation filter matrix or estimating a separation filter matrix by using linear prediction residual signals, are presented. Still, some problems are generated in these methods, when we separate reverberation of signals themselves or interference signals from mixed signals. To solve these problems, this paper proposes the multichannel blind deconvolution method which divides processing procedure into the stage to separate interference signals and the stage to eliminate a reverberation of signals themselves. In simulation results, we confirm that the proposed algorithm can solve the problems.

• The KIPS Transactions:PartC
• /
• v.12C no.1 s.97
• /
• pp.83-96
• /
• 2005

The multichannel switch is an architecture widely used for ATM (Asynchronous Transfer Mode). It is known that the fault tolerant characteristic can be incorporated into the multichannel crossbar switching fabric. For example, if a link belonging to a multichannel group fails, the remaining links can assume responsibility for some of the traffic on the failed link. On the other hand, if a fault occurs in a switching element, it can lead to erroneous routing and sequencing in the multichannel switch. We investigate several fault localization algorithm in multichannel crossbar ATM switches with a view to early fault recovery. The optimal algorithm gives the best performance in terms of time to localization but it is computationally complex which makes it difficult to implement. We develop an on-line algorithm which is computationally more efficient than the optimal one. We evaluate its performance through simulation. The simulation results show that the Performance of the on-line algorithm is only slightly sub-optimal for both random and bursty traffic. There are cases where the proposed on-line algorithm cannot pinpoint down to a single fault. We enumerate those cases and investigate the causes. Finally, a fault recovery algorithm is described which utilizes the information provided by the fault localization algorithm The fault recovery algorithm providesadditionalrowsandcolumnstoallowcellstodetourthefaultyelement.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.9
• /
• pp.1184-1201
• /
• 1995

Two multiple access protocols are proposed for a multichannel WDM optical fibre local area network or metropolitan area network in which users are interconnected using a passive star topology. Each user has a single tunable transmitter and a single tunable receiver. A transmitter sends a control packet before its data packet transmission so that its intended receivers can tune to the proper data channel wavelength. The maximum throughput of the proposed protocols are independent of the effective normalized propagation delay which may include the transmitter and receiver tuning times and the processing delays. The maximum throughputs of the protocols are analyzed and compared with those of the existing ones by numerical examples. The message delay of the R- Aloha/synchronous N-server switch protocol which is suitable for the queued users is also analyzed.