• Tribology and Lubricants
• /
• v.21 no.6
• /
• pp.263-267
• /
• 2005

The tribological performance of multi-walled carbon nanotubes (MWNT) in mineral oils is investigated at ambient temperature. The frictional forces, wear amounts and cycles to scuffing of the oils with nanotubes and without those were measured using the ball-on-disk tester. It was found that there were little differences in the frictional forces and wear amounts of two oils. However, the scuffing times of oils with nanotubes were much longer than those of oils without nanotubes in sliding tests. The nanotubes were very effective on maintaining the oil gap and protecting the surfaces in boundary lubricated sliding.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.205-206
• /
• 2008

The transparent conductive film was prepared by bar coating method of poly (3, 4-ethylenedioxythiophene) (PEDOT) and poly (sodium 4-stylenesulfonate) grafted multi-walled carbon nanotubes (MWNT-PSS) nanocomposites solution on the polyethylene terephthalate (PET) film. In this case, multi-wall carbon nanotubes was treated by chemical methods to obtain water soluble MWNT-PSS and then blending with PEDOT. The non-covalent bonding of polymer to the MWNT surface was confirmed by Fourier transform infrared (FT-IR), thermal gravimetric analysis (TGA) and Transmission electro microscope (TEM) investigation also showed a polymer-wrapped MWNT structure. Furthermore, the electrical, transmission properties of the transparent conductive film were investigated and compared with control samples are raw PEDOT films.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.279-279
• /
• 2013

We report on the preparation of polydimethylsiloxane (PDMS) coated multi-walled carbon nanotubes (MWNTs) followed by their dispersion in various solvents. To disperse MWNTs without acids of surfactants, which are the commonly used methods, hydrophobic PDMS coating was selected. It was determined that the PDMS coated MWNTs are more dispersed in diverse solvents such as dimethyl formamide (DMF) and acetone than bare MWNTs. In case of DMF solvent, dispersion of MWNT was improved by 40 % upon PDMS-coating of MWNT, which was confirmed by UV/Vis absorption spectroscopy. In this work, the PDMS coated MWNTs dispersed solution was also used for the fabrication of film, which is conductive, transparent and superhydrophobic because of the reduced aggregation and increased water repellency of MWNTs.

• Applied Microscopy
• /
• v.44 no.2
• /
• pp.68-73
• /
• 2014

With wide use of nano-materials, it is increasingly important to address their potential toxicity to mammalian cells. However, toxic effects of these materials have been mainly assessed by the cell survival assays. Considering that mitochondrial morphology and quality are highly sensitive to the condition of the cells, and the impairment of mitochondrial function greatly affect the survival of cells, here we tested the impact of multi-walled carbon nanotubes (MWNT) on the survival, mitochondrial morphology, and their membrane potential in HeLa cells. Interestingly, although MWNT did not induce cell death until 24 hours as assessed by pyknotic cell assay, mitochondrial length was elongated and the mitochondrial membrane potential was significantly reduced by exposure of HeLa cells to MWNT. These results suggest that MWNT exposure is potentially harmful to the cell, and the mechanism how MWNT alters mitochondrial quality should be further explored to assess the safety of MWNT use.

• Macromolecular Research
• /
• v.14 no.5
• /
• pp.545-551
• /
• 2006

Aqueous dispersions of pristine and functionalized (COOH- and $NH_2$-) multi-walled, carbon nanotubes (MWNTs) were prepared by using three types of surf act ants: sodium dodecyl sulfate (SDS, anionic), PEO-PPO-PEO (Pluronic P84, non-ionic), and poly(styrene/$\alpha-methyl$ styrene/acrylic acid) random terpolymer, i.e., alkali-soluble resin (ASR). The aggregate size, $\zeta-potential$, and storage stability of the MWNT aqueous dispersions were investigated by using dynamic light scattering and the turbidity method at room temperature. The exfoliation of the MWNT aggregates was determined by a UV-visible spectrophotometer and the morphology of the surfactant-coated MWNTs was observed by transmission electron microscopy (TEM). In all cases, ASR showed better dispersion stability with the smallest aggregate size, compared with the other surfactants, because of its unique molecular structure, i.e., randomly incorporated carboxylic acid groups and planar phenyl groups that can be irreversibly and effectively adsorbed on the MWNT surface. A predominantly-exfoliated morphology of MWNTs was observed in the presence of ASR from the strong intensity of the UV-vis spectrum at 263 nm.

• Journal of Hydrogen and New Energy
• /
• v.14 no.2
• /
• pp.122-130
• /
• 2003

Li/S 이차전지의 유황양극의 전기전도도를 향상시키고 유황이 충방전시 전해질내로 용출되는 것을 방지하기 위하여 multi-walled carbon nanotubes (MWNTs)를 thermal CVD 방법으로 제조하여 유황양극에 첨가하였다. 실험결과 첫 사이클에서 Li/S 이차전지의 방전용량은 485mAh/g-sulfur이었고, MWNT 첨가 이후에 유황양극의 cycle life와 rate-capability가 향상되는 것을 관찰할 수 있었다. 그러므로 MWNT는 polysulfide를 유황양극에 흡착시키는 동시에 good electric conductor로서 작용한다는 것을 알 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.133.1-133.1
• /
• 2010

In this work, carbon black(CBs)-embed multi-walled carbon nanotubes (MWNTs) as conductive fillers for activated carbon(ACs)-based electrodes for supercapacitor were prepared by chemical reduction of oxidized MWNTs and CBs. The effect of CBs-MWNT composites on electrochemical performances of ACs-based electrodes were investigated as a function of CB-MWNT ratio. It was found that CBs-MWNTs composites were formed by the reduction reaction of the functional groups of oxidized MWNTs and CBs. It was resulted in the conjugation of CBs onto the MWNT having high surface area and aspect ratio, leading to the enhanced electrical properties of MWNTs. The electrochemical performances, such as current density, charge-discharge, and specific capacitance of the ACs/CBs-MWNT electrodes were higher than that of ACs/MWNTs and conventional ACs/CB electrodes, which was attributed to the synergistic effect of CBs-MWNTs as a conductive filler.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.8
• /
• pp.2279-2282
• /
• 2010

In this work, the electrical and thermal properties of polyimide/multi-walled carbon nanotube (MWNT) nanocomposites were investigated. The polyimide/MWNT nanocomposites contained from 0 to 2.0 wt % of MWNT. The electrical properties of the polyimide films were characterized by a specific resistance measurement. The thermal properties were evaluated using thermogravimetric analysis (TGA) and a differential scanning calorimeter (DSC). It was found that the thermal properties of the polyimide nanocomposites increased with increasing MWNT content and specific resistance as well. This result indicated that the crosslinking of polyimide/MWNT nanocomposites was enhanced by good distribution of the MWNT in the polyimide resins, resulting in the increase of the electrical and thermal properties of the nanocomposites.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.1127-1130
• /
• 2010

본 연구에서는 CNT의 분산성을 개선하고자 다중벽 탄소나노튜브(multi-walled carbon nanotube, MWNT)에 butyllithium solution 및 hexyllithium solution을 이용하여 표면을 화학적으로 개질하였다. 개질된 MWNT는 적외선 분광 분석 및 Raman spectrophotometer를 이용하여 MWNT에 작용기가 도입되었는지를 확인하였다. 또한, 열중량분석기(Thermogravimetric analysis, TGA)를 이용하여 작용기가 도입된 MWNT의 열적 성질을 측정하였으며, MWNT 및 개질된 MWNT를 다양한 용매에 따른 분산성을 확인하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2713-2718
• /
• 2010

To improve the CNT's dispersion, we tried to chemically modify the surface of MWNT with the butyllithium and the hexyllithium solution in sonicated reactor. The functionalized-MWNTs were characterized by Fourier transform infrared spectrometer(FT-IR) and Raman spectrophotometer. Also, we investigated the amount of alkyl moiety incorporated into MWNT's surface with Thermal gravimetric analyzer(TGA) and dispersibility in various organic solvents. Finally, we could find organic content was about 5% of the functionalized MWNT and dispersibility was enhanced in some solvents having intermediate solubility parameter.