• 한국산업융합학회 논문집
• /
• 제24권6_2호
• /
• pp.891-897
• /
• 2021

In this paper, we propose a destination optimal route algorithm for providing route finding service for the transportation handicapped by using the multi-criteria decision-making technique and the modified A-STAR optimal route search algorithm. This is a method to set the route to the destination centering on safety by replacing the distance cost of the existing A-STAR optimal route search algorithm with the safety cost calculated through AHP/TOPSIS analysis. To this end, 10 factors such as road damage, curb, and road hole were first classified as poor road factors that hinder road driving, and then pairwise comparison of AHP was analyzed and then defined as the weight of TOPSIS. Afterwards, the degree of driving safety was quantified for a certain road section in Busan through TOPSIS analysis, and the development of an optimal route search algorithm for the transportation handicapped that replaces the distance cost with safety in the finally modified A-STAR optimal route algorithm was completed.

• 국제초고층학회논문집
• /
• 제12권1호
• /
• pp.63-74
• /
• 2023

Large-capacity public transportation systems, represented by urban metro lines, are the key to alleviating the significant increase in urbanization and motorization in China. But to improve the agglomeration effect of metro stations in a more accurate and targeted way requires scientific evaluation and classification of the surrounding areas of metro stations. As spatial and functional design are the core factors for urban renewal design, this study took Beijing as an example, using multi-source data to evaluate the morphology and functional composition surrounding areas of metro stations, and the Boston Consulting Group (BCG) matrix was used to classify and characterize each type of surrounding areas from morphological-functional dimensions. It shows a negative correlation of the mix-use index with the floor area ratio, and only about 20% of the areas achieve the ideal situation of high construction intensity with high mix-use diversity. Hoping to provide a reference for city managers and designers in dealing with the surrounding metro stations with different construction intensities in a more precise way.

• 기술사
• /
• 제34권1호
• /
• pp.49-52
• /
• 2001

It is expected that transportation sector will develope to a systematic and multi-disciplinary way in which transportation, information and electronic technologies are harmonized. This will be the way that the 21st century demand. To be prepared for such development, sharing of information from different sources through a integrated approach is essential. Also an active role of specialized staff are required to achieve a integrated control and management. The specialized staff should do his best for his task with appropriate specialty, a sense of responsibility, a progressive mind and a vision. He also make much effort to enhance and keep up-to-date his specialty. Then we can modestly look forward to a specialized Information society in the 21s1 century.

• 대한교통학회지
• /
• 제4권1호
• /
• pp.12-27
• /
• 1986

This study examined user preferences toward transportation modes in Seoul. Two multidimensional scaling models, the ideal point and vector models, were applied to data on mode preferences of 114 adults in the metropolitan area. While both models produced fairly similar results, the vector model performed slightly better than the other in terms of interpretability of the results. The transport attributes elicited are comfort, flexibility, travel cost, travel time, privacy, and safety; among which comfort is salient most. The comfort variable is a multi-faceted attribute in nature. The variations of attribute preferences are most significant between the gender groups as well as worker/nonworker groups. In particular, male workers, female workers and female nonworkers form three distinctive market segments. An unidimensional scaling of the preference data reveals that subway, auto-driver, and subscription bus modes are preferred most, whereas motorcycle and bicycle least. The other modes of express bus, taxt, auto-passenger, bus and walk rank intermediately. An examination of how preference orders vary among modal groups hints that users align their stated attitudes to their choice in order to reduce cognitive dissonance.

• Interaction and multiscale mechanics
• /
• 제5권2호
• /
• pp.145-155
• /
• 2012

The thin-plate structure and the box-beam structure are two typical welded structures in railway vehicles. Because of their structure complexity, bigger size and multi-seams, welding residual distortion which occur in welding process bring unfavorable effect on the quality of welding products manufacturing and service. As a result, welding distortion forecasting and control become an important and urgent research topic in railway vehicles. In this paper, three different numerical methods are presented corresponding to three typical types of welded structures of railway vehicles and welding deformation are simulated. Consistence of numerical results and experimental data proves the correctness of models and feasibility of simulation methods.

• Structural Engineering and Mechanics
• /
• 제11권3호
• /
• pp.259-272
• /
• 2001

The impact behavior of a multigirder concrete bridge under single and multiple moving vehicles is studied based on correlated road surface characteristics. The bridge structure is modeled as grillage beam system. A 3D nonlinear vehicle model with eleven degrees of freedom is utilized according to the HS20-44 truck design loading in the American Association of State Highway and Transportation Officials (AASHTO) specifications. A triangle correlation model is introduced to generate four classes of longitudinal road surface roughness as multi-correlated random processes along deck transverse direction. On the basis of a correlation length of approximately half the bridge width, the upper limits of impact factors obtained under confidence level of 95 percent and side-by-side three-truck loading provide probability-based evidence for the evaluation of AASHTO specifications. The analytical results indicate that a better transverse correlation among road surface roughness generally leads to slightly higher impact factors. Suggestions are made for the routine maintenance of this type of highway bridges.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2000년도 추계학술발표논문집 (상)
• /
• pp.661-664
• /
• 2000

본 연구에서는 인터넷을 기반으로 하고 GIS(Geographical Information System)와 ITS(Intelligent Transportation System)제어 응용을 고려 한 컴퓨팅 플랫폼으로 EIMAS(Efficient and Intelligent Multi-Agent System)을 제안한다. GIS 와 관련 활용 시스템들은 개방형 지리 정보 처리 상호 운용 개념이 확산되면서 물리적으로 분산된 환경을 가지지게 되었고 이러한 분산 환경에서 프로그램개발과 사용자의 요구에 서비스를 효과적으로 제공하기 위하여, GIS와 이와 연계한 GI(Geographical Information) 활용시스템들의 각기 다른 구성 요소들을 통합하는 시스템이 요구된다. GIS 와 GIS Application으로 ITS(Intelligent Transportation System)위한 Java Mobile Agent와 Multiple Agent System 인 EIMAS를 플렛폼으로 제안한다. 이 시스템은 GIS 시스템과 ITS 시스템에 제공되는 Agent가 활동하는 플레이스 위에서 에이전트가 목적과 워크에 적합한 효율적인 워크플로우를 생성하여 시간 효율적이고 지능적인 분산. 병렬처리를 수행하는 플렛폼을 설계한다.

• 대한교통학회지
• /
• 제14권2호
• /
• pp.7-29
• /
• 1996

Traffic flow characteristics is analysed on eight multi-lane roads which are unsignalized in urban areas. Data of traffic flow rates by classification and average speed were gathered every ten minutes interval for twenty-four hours. Machine (NC-90A) was used to acquire the field data. The major purpose of this study is to build up speed-density models on urban arterial roads. Five different kinds of models were tested. Those models are Greenshields' model, Greenberg's model, modified Greenberg's model, Underwood's model and Drake's model. The modified Greenberg's model fits best at six points and the Greenshield's model fits best two points out of eight points. The breakpoint(Kb) of modified Greenberg's model is between 10 and 32 pcphpl. Capacity drawn from speed-volume relationships were appeared to be arround 2,000 and 2,200 pcphpl at the Hannam Bridge and the Hannam Overpass and 1,100 and 1,700 pcphpl at Namsan Tunnel(No1) and the beginning point of Gyeong-Bu Expressway.

• 산업경영시스템학회지
• /
• 제26권1호
• /
• pp.85-94
• /
• 2003

In this paper, a mathematical model is developed for economic design of multi-stage distribution system that consists of factory, central distribution centers, local distribution centers and retailers. The retailers are supplied products from different stage suppliers according to order size. The retailers are supplied products from factory if demand amount is large, central distribution center if medium, local distribution center if small. The economic design is to determine the economic size of facility factors that consist of distribution system. The cost factors are transportation cost from supply places to demand places, handling cost at distribution centers and inventory holding cost at retailers. It is to determine the transportation route of each retailer, the size and number of the vehicle at factory and distribution centers, the handling amount at distribution centers in order to minimize the total costs. The mathematical model is represented, the solution procedure is developed, and a numerical example is shown.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2015년도 제52차 하계학술대회논문집 23권2호
• /
• pp.87-88
• /
• 2015

최근 IT기술의 발전과 더불어 보안의 중요성이 부각되면서 Pin Number, Password, Pattern Recognition 등 인증 방식에 대한 연구가 진행되고 있지만 위와 같은 One-factor 인증 시스템에는 "Shoulder Attack"과 같은 사용자 레벨에서의 보안공격에 취약하다. 위와 같은 문제점을 해결하기 위하여 'Google E-mail' 등 일부 강화된 보안이 필요한 시스템에서는 추가 모듈을 이용한 Two-factor 인증 시스템을 적용하여 보안을 제공하고 있지만 사용상의 번거로움과 복잡성으로 인해 고도의 보안 기술의 적용을 받지 못하는 등 많은 제약사항이 남아있다. 본 논문에서는 위 와 같은 One-factor 시스템의 취약점을 파악하여 그에 따라 보안 인증 절차를 향상시키기 위해 암호화와 인증 방법으로 지문인식을 사용하여 Multi-level 인증 시스템을 제안한다. 본 시스템은 Send 디비이스를 구현한 아두이노를 통해 M2M 서비스를 수행하며, 암호와 지문 정보를 아두이노 디바이스에 저장하여 두 가지의 신뢰적인 정보를 바탕으로 인증하는 시스템이다. 아두이노를 이용하여 디바이스 분리를 통한 사용자 레벨에서의 보안을 강하고 지문인식을 통해 불편함과 복잡성을 간소화하였다.