• 한국컴퓨터정보학회논문지
• /
• 제6권4호
• /
• pp.163-167
• /
• 2001

물적분배시스템의 운영에 있어서 발생하는 품절에 대한 대처방법으로서 동일단계의 측면 재공급 허용을 통한 시스템 운영방안을 제안함으로써 최적물류비용을 갖는 물적분배시스템을 설계하였으며, 또한 본 연구의 고려 대상인 중앙분배센터와 지역분배센터 사이의 수송비용관계, 지역분배센터 상호간 보충허용 하의 물적분배시스템 운영에 관한 연구를 통하여 다중공급원 알고리즘을 개발하고, 기존의 단일 공급원 가정하의 분배시스템과의 총운용비용에 대한 비교분석을 통하여 본 연구에서 개발된 알고리즘의 효율성을 입증하고, 또한 수치 예를 통하여 본 연구의 타당성을 검토하였다.

• 반도체디스플레이기술학회지
• /
• 제2권3호
• /
• pp.25-30
• /
• 2003

In this study, the controller using TMS320LF2407 low voltage DSP for motor control is designed and realized. It has 40 MIPS calculating ability and its driving voltage is 3.3 V for low power. The peripheral elements, however usually use 5 V and they need voltage transfer interface. In this study, voltage transformation and reducing noise are studied and space vector PWM is adopted as a motor control scheme. According to these methods, the efforts for software programming and calculation processes are reduced. In addition, the hardware is also simplified by substituting the current control part with software programming. Through this study, the DSP based servo controller increases its ability for high performance multi-function on semiconductor transportation equipments..

• 대한교통학회지
• /
• 제3권1호
• /
• pp.58-75
• /
• 1985

On facing the information society, the multi-faceted information utilization and the establishment of synthetic information management system in the overall industry and business administration have raised considerable attention. Thus, this study aims at the improvement of freight transport management through the establishment of pooling of the road freight transport information system as its effective information supporting system. Especially, it describes the freight transport information network, structure, function, and subject of the freight transport information center, as a basic planning design for the freight transport information system. Furthermore, it deals with the identification of the systems design requirements, working process, and S/W & H/W design specifications. Finally, we expect that this study will be contributed for the improvement of the road freight transport business to meet both the increase of freight transport demands due to the continuing economic growth and the social needs for the establishment of transport-order.

• Computers and Concrete
• /
• 제8권3호
• /
• pp.327-341
• /
• 2011

Three-dimensional graphic objects created by MATLAB are exported to the AUTOCAD program through the MATLAB handle functions. The imported SAT format files are used to produce the finite element mesh for MSC.PATRAN. Based on the Monte-Carlo random sample principle, the material heterogeneity of cement composites with randomly distributed fibers is described by the WEIBULL distribution function. In this paper, a concept called "soft region" including micro-defects, micro-voids, etc. is put forward for the simulation of crack propagation in fiber-reinforced cement composites. The performance of the numerical model is demonstrated by several examples involving crack initiation and growth in the composites under three-dimensional stress conditions: tensile loading; compressive loading and crack growth along a bimaterial interface.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.54-61
• /
• 2001

The purpose of this study is establishing effective multimodal logistics structure in northeast Asia. For this end, the interface between transport modes, construction method of rail-ferry transport system, system operation and implementation strategies by step were studied. Rail-ferry system have a competition over present transportation system in international cargo trade market between Korea and China. And, the operation of rail-ferry transportation system between Korea and China is meaningful project in the point of providing various choices to clients. Korea and China should have agreements in trade, customs duties, ports in the next year for the success of this project.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1203-1208
• /
• 2010

Recently, there are environmental issues for sustainable transportation system to pursue the energy-efficient and environment-friendly public urban transit. These transportation system needs to offer demand-oriented high-quality service being on the same level with cab service for urban space. PRT(Personal Rapid Transit), small track-guided vehicle, is repeatedly mentioned as a possible alternative for the new urban public transportion system, but but there are not many researches on the operational optimal routing for PRT network. In this paper, the concept of PRT and general optimal routing methods are reviewed. And we suggest the optimal routing method for city-wide PRT network with multi-vehicles and stations, junctions and directional arcs. Futher research directions for PRT routing are presented.

• 대한교통학회지
• /
• 제12권4호
• /
• pp.5-19
• /
• 1994

The new concept of level of service for the airport system indicates that there must be strong stimulation to proceed with the current stereotyped service standards which are being criticised due to their being based on, either physical capacity/volume or temporal/spatial standards that directly incorporates the perception of passengers. Quantitative factors have been dealt with the main service measurements when evaluating level of service. However, the passenger's perception for the provision service at the airport system is definitely important consideration to assess level of service. To enhance the reliability of service level evaluation from the passenger's point of view, this study has adopted three main evaluation factors ; temporal/spatial factors as quantitative measurements and comfort and reasonable service factors as qualitative measurements. The multi-decision model was constructed using Fuzzy Set Theory and applied to a case study at Seoul Kimpo International Airport. Results are presented in terms of passenger satisfaction with a variety of different values.

• 대한산업공학회지
• /
• 제34권3호
• /
• pp.296-307
• /
• 2008

A semiconductor production system has sophisticated manufacturing operations and needs high capital investment for its expensive equipment, which warrants efficient real-time flow control for wafers. In the bay, we consider material handling equipment that can handle multiple carriers of wafers. The dispatching logic first determines the transportation time of each carrier to its destination by each unit of transportation equipment and uses this information to determine the destination machine and target carrier. When there is no available buffer space at the machine tool, the logic allows carriers to stay at the buffer of a machine tool and determine the delay time, which is used to determine the destination of carriers in URL. A simulation study shows this dispatching logic performs better than the procedure currently in use to reduce the mean flow time and average WIP of wafers and increase efficiency of material handling equipment.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.318-322
• /
• 2002

In this paper the automatic plate forming system developed by the present research group is introduced, which would be helpful for other researchers. The present system consists of three parts : heating line information generation software, automatic heating apparatus and numerical control system. The numerical control system developed by the present authors is detailed. Performance test for the developed system has been carried out and good results has been obtained. As an extension of the present study, the present automatic plate fanning system will be applied to surfaces found in ship and offshore structure.

• 대한교통학회지
• /
• 제13권1호
• /
• pp.35-62
• /
• 1995

Traffic has a very important function but has caused such social problems as traffic congestion parking and traffic accidents in metropolitan areas. It is difficult to examine the causes of traffic accidents related to human life, which occur by human, vehicle and environmental factors. But human factor is the only measure requlating these factors together an analyzing factors influencing establishment of counterplan of traffic accidents. Consequently , this study employs the principal component analysis and stepwise multiple regression analysis to estimate the characteristics and influential factors of traffic accidents and defines the typical patterns of happening lots of traffic accidents. Accordingly, this study establishes an acknowledgement model of the causes and preference model of the counterplan of traffic accidents using Multi-Dimension Preference(MDPREF) method.