• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1780-1784
• /
• 2015

Traditional IP routing, see only the Destination Address When Forwarding Layer 3 routing and exchange information and Destination-Based Routing Lookup is required for all Hop. Thus, all routers Full Internet routing information, the route information of more than about 120,000 may require. Therefore, the router configuration, which can be dispersed in the environment, the traffic load is required in accordance with this congestion. In this study, a unique characteristic of the Internet in the environment of an existing network Best Effect for QoS guarantee and hardware high speed switching of large multimedia data transmitted using a Labeling for forwarding a packet environment configuration is required. Video Stream Broadcast Transport Labeling rather than in much of the higher performance of the multi-step policy to most of the Video Stream Packet deulim was fixed to Labeling Header Format proposes a method of applying an effective QoS policy to a more simplified policy.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.11C
• /
• pp.1124-1131
• /
• 2002

The banyan network is a popular and basic structure of the multi-stage ATM switches. This paper presents a novel approach to resolve the internal blocking of the banyan network by using a Non-Blocking Permutation Generator (NBPG). The NBPG performs two functions, i.e., the first is to extract the conflict cells from the incoming cells and Ole second is to re-assign new input port addresses to the conflict cells. As a result, NBPG generates non-blocking I/O permutations. To estimate the performance of the NBPG, we provide the results of several simulations.

• Journal of Power Electronics
• /
• v.13 no.4
• /
• pp.679-691
• /
• 2013

High-power electromagnetic transmitter power supplies are an important part of deep geophysical exploration equipment. This is especially true in complex environments, where the ability to produce a highly accurate and stable output and safety through redundancy have become the key issues in the design of high-power electromagnetic transmitter power supplies. To solve these issues, a high-frequency switching power cascade based emission power supply is designed. By combining the circuit averaged model and the equivalent controlled source method, a modular mathematical model is established with the on-state loss and transformer induction loss being taken into account. A triple-loop control including an inner current loop, an outer voltage loop and a load current forward feedback, and a digitalized voltage/current sharing control method are proposed for the realization of the rapid, stable and highly accurate output of the system. By using a new algorithm referred to as GAPSO, which integrates a genetic algorithm and a particle swarm algorithm, the parameters of the controller are tuned. A multi-module cascade helps to achieve system redundancy. A simulation analysis of the open-loop system proves the accuracy of the established system and provides a better reflection of the characteristics of the power supply. A parameter tuning simulation proves the effectiveness of the GAPSO algorithm. A closed-loop simulation of the system and field geological exploration experiments demonstrate the effectiveness of the control method. This ensures both the system's excellent stability and the output's accuracy. It also ensures the accuracy of the established mathematical model as well as its ability to meet the requirements of practical field deep exploration.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.2
• /
• pp.106-112
• /
• 2007

This paper proposes a hybrid architecture algorithm for fast computation of DCT and DFT via recursive factorization. Recursive factorization of DCT-II and DFT transform matrix leads to a similar architectural structure so that common architectural base may be used by simply adding a switching device. Linking between two transforms was derived based on matrix recursion formula. Hybrid acrchitectural design for DCT and DFT matrix decomposition were derived using the generation matrix and the trigonometric identities and relations. Data flow diagram for high-speed architecture of Cooley-Tukey type was drawn to accommodate DCT/DFT hybrid architecture. From this data flow diagram computational complexity is comparable to that of the fast DCT algorithms for moderate size of N. Further investigation is needed for multi-mode operation use of FFT architecture in other orthogonal transform computation.

• Journal of Communications and Networks
• /
• v.9 no.4
• /
• pp.511-523
• /
• 2007

In broadband convergence network(BcN), heterogeneous broadband wired & wireless subnetworks and various terminal equipments will be interconnected. In order to provide end-to-end realtime multimedia services on such heterogeneous networking environment, as a result, two major problems should be resolved: i) Multimedia session establishment & negotiation that adjusts the differences in the capability of multimedia data processing at the end terminal nodes, ii) quality of service(QoS)-guaranteed connection establishment or resource reservation with connection admission control(CAC) in each heterogeneous subnetworks along the path. The session layer signaling(e.g., SIP/SDP) should be extended for QoS negotiation, and must be tightly cooperating with network layer signaling or resource reservation with CAC function. In this paper we propose a session and connection management architecture for the QoS-guaranteed realtime multimedia service provisioning on BcN, with Q-SIP/SDP, resource reservation protocol with traffic engineering extension, and CAC functions. The detailed interaction scenario and related algorithms for QoS-guaranteed realtime multimedia session, resource reservation and connection establishment are explained and analyzed. From the experimental implementation of the proposed scheme on a small scale BcN testbed, we verified that the proposed architecture is applicable for the realtime multimedia service provisioning. We analyze the network performance and QoS parameters in detail.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.521-527
• /
• 2020

Quantum-dot cellular automata (QCA) is a technology that attracts attention as a next-generation digital circuit design technology, and several digital circuits have been proposed in the QCA environment. Content-addressable memory (CAM) is a storage device that conducts a search based on information stored therein and provides fast speed in a special process such as network switching. Existing CAM cell circuits proposed in the QCA environment have a disadvantage in that a required area and energy dissipation are large. The CAM cell is composed of a memory unit that stores information and a match unit that determines whether or not the search is successful, and this study proposes an improved QCA CAM cell by designing the memory unit in a multi-layer structure. The proposed circuit uses simulation to verify the operation and compares and analyzes with the existing circuit.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.9 s.339
• /
• pp.71-84
• /
• 2005

A 'VPN over Intemet' has the benefit of being cost-effective and flexible. However, it has difficulties providing sufficient QoS and adequate transmission capacity for high bandwidth service. Given the increasing demand for high bandwidth Internet and QoS assurances in a 'VPN over Internet', IP/GMPLS based on a control plane combined with a high bandwidth, DWDM optical network is seen as a very favorable anroach for realizing the future 'OVPN over IP/GMPLS over DWDM'. Within this architecture, providing QoS guaranteed multimedia services with a differentiated QoS guaranteed protocol framework with QoS recovery is one of the key issues to implement. Therefore, in this paper, we suggest the entire interoperability procedure of control protocols based on differentiated optical QoS service (DOQOS) classes for providing end-to-end QoS in an 'OVPN over IP/GMPLS over DWDM' architecture.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.5 no.3
• /
• pp.159-167
• /
• 2005

Quantization effects (QEs), which manifests when the device dimensions are comparable to the de Brogile wavelength, are becoming common physical phenomena in the present micro-/nanometer technology era. While most novel devices take advantage of QEs to achieve fast switching speed, miniature size and extremely small power consumption, the mainstream CMOS devices (with the exception of EEPROMs) are generally suffering in performance from these effects. In this paper, an analytical model accounting for the QEs and poly-depletion effects (PDEs) at the silicon (Si)/dielectric interface describing the capacitance-voltage (C-V) and current-voltage (I-V) characteristics of MOS devices with thin oxides is developed. It is also applicable to multi-layer gate-stack structures, since a general procedure is used for calculating the quantum inversion charge density. Using this inversion charge density, device characteristics are obtained. Also solutions for C-V can be quickly obtained without computational burden of solving over a physical grid. We conclude with comparison of the results obtained with our model and those obtained by self-consistent solution of the $Schr{\ddot{o}}dinger$ and Poisson equations and simulations reported previously in the literature. A good agreement was observed between them.

• Structural Engineering and Mechanics
• /
• v.24 no.3
• /
• pp.375-393
• /
• 2006

Under high velocity, pulse type near source earthquakes semi-active control systems are very effective in reducing seismic response base isolated structures. Semi-active control systems can be classified as: 1) independently variable stiffness, 2) independently variable damping, and 3) combined variable stiffness and damping systems. Several researchers have studied the effectiveness of independently varying damping systems for seismic response reduction of base isolated structures. In this study effectiveness of a combined system consisting of a semi-active independently variable stiffness (SAIVS) device and a magnetorheological (MR) damper in reducing seismic response of base isolated structures is analytically investigated. The SAIVS device can vary the stiffness, and hence the period, of the isolation system; whereas, the MR damper enhances the energy dissipation characteristics of the isolation system. Two separate control algorithms, i.e., a nonlinear tangential stiffness moving average control algorithm for smooth switching of the SAIVS device and a Lyapunov based control algorithm for damping variation of MR damper, are developed. Single and multi degree of freedom systems consisting of sliding base isolation system and both the SAIVS device and MR damper are considered. Results are presented in the form of nonlinear response spectra, and effectiveness of combined variable stiffness and variable damping system in reducing seismic response of sliding base isolated structures is evaluated. It is shown that the combined variable stiffness and variable damping system leads to significant response reduction over cases with variable stiffness or variable damping systems acting independently, over a broad period range.

• Journal of Digital Contents Society
• /
• v.16 no.5
• /
• pp.775-781
• /
• 2015

EBS started 2HD MMS experimental broadcasting for the first time in Korea on Feb. 11, 2015. It uses the picture compression technique based on MPEG-2 CODEC, and applies the result of the experiment about variable bit rates and changes according to the scanning types, 1080i and 720p. But when changing channels, the delay in displaying picture occurs because of the operation of the variable GOP on MMS broadcasting, which optimizes image quality by application variable bit rates. In this study, verified the relationship between the decoding time of I frames and the GOP set in the encoding step by experimenting and analyzing ON-AIR TS. By using the verification data and adjusts the Encoder GOP parameters, improved the different video display time delays according to the scanning mode 1080i and 720p.