• 전력전자학회논문지
• /
• 제12권2호
• /
• pp.139-148
• /
• 2007

본 논문에서는 3상 저주파 변압기를 이용한 절연형 멀티레벨 인버터를 제안한다. 제안된 인버터는 3상 절연형 변압기를 이용함으로 비절연형 멜티레벨 인버터와 달리 단일 직류 전원을 사용할 수 있는 장점이 있으며, 기존의 단상 변압기를 이용한 3상 멀티레벨 인버터에 비하여 변압기의 수를 줄일 수 있다. 또한 출력 기본주파수와 동일한 스위칭 주파수로 동작하는 스위칭 각 제어 방식을 통하여 출력 전압의 저차 고조파 성분과 스위치 손실을 줄일 수 있었다. Matlab을 이용한 시뮬레이션 및 실험을 통하여 제안된 방식의 타당성을 검증 하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.266-270
• /
• 2001

This paper presents a novel topological prototype of voltage source series quasi-resonant zero current soft-switching pulse frequency modulated dc-dc power converter circuit using IGBTs which incorporates a high-frequency flyback transformer link. Its steady-state operating principle is described on the basis of simulation analysis, along with the open loop controlled power regulation characteristics of the multi-functional coupled inductors linked dc-dc power converter operating under a principle of zero current soft switching commutation.

• 한국재료학회지
• /
• 제13권6호
• /
• pp.394-397
• /
• 2003

MTJ devices are fabricated using metal shadow masks and switching characteristics are investigated under 2 dimensional magnetic field. When the hard axis field is less than $\pm$ 16 Oe, switching behavior is similar to that based on the Stoner-Wohlfarth model. As the hard axis field is larger than $\pm$ 16 Oe, deviation from the expectation by Stoner-Wohlfarth model is observed. These phenomena are induced by the generation of multi-domain and inhomogeneous magnetization reversal.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권5호
• /
• pp.231-237
• /
• 2005

Many conventional multi-level inverters have detected switching faults by using the over voltage and current. However, fault detection of the switching elements is very difficult because the voltage and current due to each switching fault decrease more than the normal operation. Moreover, the dc-link unbalancing voltage causes a serious problem in the safety and reliability of system when the 3-level inverter faults occur Therefore, this paper proposes the simple fault diagnose method and the neutral-point-voltage control method that can protect the 3-level inverter system from the unbalancing voltage of the do-link capacitors when the faults of switching elements occur in the 3-level inverter that is very efficient in ac motor drives of the high voltage and high power applications. Through experiment results, the validity of the proposed method is demonstrated.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.651-654
• /
• 2005

In this paper, an efficient switching pattern to equalize the size of transformer is proposed for a multi-level inverter employing cascaded transformers. It is based on the prior selected harmonic elimination PWM(SHEPWM) method. Because the maximum magnetic flux imposed on each transformer becomes exactly equal each to each, all transformers can be designed with the same size regardless of their position. Therefore, identical full-bridge inverter units can be utilized, thus improving modularity and manufacturability. The fundamental idea of the proposed switching pattern is illustrated and the analyzed theoretically. The validity of the proposed switching strategy is verified by experimental results.

• 한국정보처리학회논문지
• /
• 제6권5호
• /
• pp.1212-1218
• /
• 1999

This paper proposes a new multipath interconnection network(MIN) structure for improving performance which uses widely in the design of multiprocessing, ATM system and VOD server. For improving performance such as passthrough ratio and packet latency, it proposes new routing method which routes one of the collided packets into the i+1-th switching stage of the adding Banyan MIN network when it occurred collision at the i-th switching stage of the basic MIN again when they collide each other. The new improved performance MIN network has been compared with MBSF, TBSF and PBSF structured MIN network from the viewpoint of passthrough ratio and the number of switching stage vs. passthrough ratio. It is shown to improve a performance and to be a simple structure which reducing the number of switching stage of adding MIN in comparison with other structured MIN including TBSF.

• 한국위성정보통신학회논문지
• /
• 제11권2호
• /
• pp.60-64
• /
• 2016

본 논문에서는 multi-tag를 사용하는 backscatter communication에 MIMO beamforming 기술을 적용하여, 수신신호의 BER과 energy harvesting을 효율을 증대시키고자 한다. multi-tag와 Hybrid-AP(H-AP) 사이의 communication을 통해 기본 채널 정보를 얻었으며, 얻은 채널정보를 이용하여, Spatial Channel Model(SCM)의 전송 시나리오에 맞는 파라미터를 설정하고 SCM 채널을 생성하였다. 그리고 MIMO Beamforming 기술을 이용하여, H-AP는 각 tag에 SINR을 올리기 위한 optimal power를 갖는 신호를 보낸다. tag에서는 optimal power를 갖는 신호를 수신하여 backscatter communication을 수행하고, receiver에서는 multi-tag가 보내는 backscatter 신호를 수신하여 time switching 기법으로 Energy harvesting을 수행한다. 따라서 Receiver에서 energy harvesting 효율과 backscatter 신호의 BER 성능 향상을 시뮬레이션을 통해 확인할 수 있었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권10호
• /
• pp.2473-2492
• /
• 2012

Energy conservation is a vital issue in wireless sensor networks. Recently, employing mobile sinks for data gathering become a pervasive trend to deal with this problem. The sink can follow stochastic or pre-defined paths; however the controlled mobility pattern nowadays is taken more into consideration. In this method, the sink moves across the network autonomously and changes its position based on the energy factors. Although the sink mobility would reduce nodes' energy consumption and enhance the network lifetime, the overhead caused by topological changes could waste unnecessary power through the sensor field. In this paper, we proposed EEDARS, an energy-efficient dual-sink algorithm with role switching mechanism which utilizes both static and mobile sinks. The static sink is engaged to avoid any periodic flooding for sink localization, while the mobile sink adaptively moves towards the event region for data collection. Furthermore, a role switching mechanism is applied to the protocol in order to send the nearest sink to the recent event area, hence shorten the path. This algorithm could be employed in event-driven and multi-hop scenarios. Analytical model and extensive simulation results for EEDARS demonstrate a significant improvement on the network metrics especially the lifetime, the load and the end-to-end delay.

• 한국콘텐츠학회논문지
• /
• 제11권9호
• /
• pp.54-62
• /
• 2011

본 논문은 차세대네트워크에서 끊김없는 서비스를 위한 로컬 및 글로벌 이동성 지원 방안을 제안한다. 제안방안은 MPLS LSP(Label Switch Path)를 통한 2.5계층 스위칭을 이용하여 핸드오버 시그널링을 처리하는 기존 MPLS-MOB(Multi Protocol Label Switching-based Mobility Management)에 로컬 이동성 관리 절차를 추가 한다. 제안방안에 의한 성능 향상을 검증하기 위해 M/M/1 수식을 이용하여 기존방안인 MIP, PMIP과 MIP 연동 시나리오 그리고 MPLS 기반 마이크로 이동성 관리 방안들과 제안방안의 핸드오버 지연을 분석하고 비교하였다. 그 결과 제안방안이 기존방안들 보다 더 나은 성능을 보임을 확인하였다.

• 전기학회논문지
• /
• 제63권12호
• /
• pp.1640-1648
• /
• 2014

This paper proposes a switching frequency reduction method for MMC (Modular Multilevel Converter) utilizing redundancy operation of sub-module, which can offer reduction of voltage harmonics and switching loss. The feasibility of proposed method was verified through computer simulations with PSCAD/EMTDC software. Based on simulation analysis, a hardware scaled-model of 10kVA, DC-1000V MMC was designed and manufactured in the lab. Various experiments were conducted to verify the feasibility of proposed method in the actual hardware system. The hardware scaled-model can be effectively utilized for analyzing the performance of MMC according to the modulation scheme and redundancy operation.