• The Journal of Korean Medicine
• /
• v.31 no.4
• /
• pp.9-19
• /
• 2010

Objective: To compare the contents and transfer rate of hazardous substances in crude, washing solution, crude after washing, decoction and remnant after boiling. Methods: The heavy metal contents of each step were measured by inductively coupled plasma mass spectrometer (ICP-MS) and mercury analyzer (SP-3DS). In order to analyze pesticides in each sample we used simultaneous multi-residue analysis of pesticides by GC/ECD, which was followed by GC/MSD analysis to confirm the identity of the detected pesticide in each sample. In addition, the contents of sulfur dioxide ($SO_2$) were performed by Monier-Williams distillation method. Results: 1. Contents (mg/kg) of heavy metals were not detected in decoctions of any tested herbal medicine prescriptions. 2. Transfer rates (%) of heavy metals from crude to remnant were as follows: Yijin-tang (As: 46.9, Cd: 50.0 and Pb: 100.0), Oryung-san (As: 80.0, Cd: 100.0 and Pb: 73.8), Hwangryunhaedok-tang (As: 88.9, Cd: 71.4 and Pb: 92.7), Bangpungtongseong-san (As: 100.0, Cd: 17.3 and Pb: 56.1), Oyaksungi-san (As: 47.4, Cd: 175.0 and Pb: 142.4). 3. Contents (mg/kg) of residual pesticides were not detected in any samples. 4. Transfer rate (%) of sulfur dioxide ($SO_2$) from crude to remnant in all samples were as follows: Yijin-tang (25.0), Oryung-san (166.7), Hwangryunhaedok-tang (50.0), Bangpungtongseong-san (181.8), Oyaksungi-san (50.0). Conclusion: Our results showed that the boiled herbal medicine prescriptions which we take are safe from the hazardous substances.

• Spatial Information Research
• /
• v.19 no.5
• /
• pp.1-11
• /
• 2011

This study mainly focused on the method of accurately extracting damage information in the im agery change detection process using the constructed high resolution aerial im agery. Bongwha-gun in Gyungsangbuk-do which had been severely damaged from a localized torrential downpour at the end of July, 2008 was selected as study area. This study utilized aerial im agery having photographing scale of 30cm gray image of pre-disaster and 40cm color image of post-disaster. In order to correct errors from the differences of the image resolution of pre-/post-disaster and time series, the prelim inary phase of image processing techniques such as normalizing, contrast enhancement and equalizing were applied to reduce errors. The extent of the damage was calculated using one to one comparison of the intensity of each pixel of pre-/post-disaster im aged. In this step, threshold values which facilitate to extract the extent that damage investigator wants were applied by setting difference values of the intensity of pixel of pre-/post-disaster. The accuracy of optimal image processing and the result of threshold values were verified using the error matrix. The results of the study enabled the early exaction of the extents of the damages using the aerial imagery with identical characteristics. It was also possible to apply to various damage items for imagery change detection in case of utilizing multi-band im agery. Furthermore, more quantitative estimation of the dam ages would be possible with the use of numerous GIS layers such as land cover and cadastral maps.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.5
• /
• pp.84-95
• /
• 2011

In this paper, we present a deblocking algorithm that removes grid and staircase noises, which are called "blocking artifacts", occurred in the compressed satellite images. Particularly, the given satellite images are compressed with equal quantization coefficients in row according to region complexity, and more complicated regions are compressed more. However, this approach has a problem that relatively less complicated regions within the same row of complicated regions have blocking artifacts. Removing these artifacts with a general deblocking algorithm can blur complex and undesired regions as well. Additionally, the general filter lacks in preserving the curved edges. Therefore, the proposed algorithm presents an adaptive filtering scheme for removing blocking artifacts while preserving the image details including curved edges using the given quantization step size and content analysis. Particularly, WLFPCA (weighted lowpass filter using principle component analysis) is employed to reduce the artifacts around edges. Experimental results showed that the proposed method outperforms SA-DCT in terms of subjective image quality.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.11
• /
• pp.143-156
• /
• 2010

Faced with an increase of malicious threats from the Internet as well as local area networks, many companies are considering deploying a security system. To help a decision maker select a suitable security tool, this paper proposed a three-step integrated framework using linear fuzzy regression (LFR) and physical programming (PP). First, based on the experts' estimations on security criteria, analytic hierarchy process (AHP) and quality function deployment (QFD) are employed to specify an intermediate score for each criterion and the relationship among these criteria. Next, evaluation value of each criterion is computed by using LFR. Finally, a goal programming (GP) method is customized to obtain the most appropriate security tool for an organization, considering a tradeoff among the multi-objectives associated with quality, credibility and costs, utilizing the relative weights calculated by the physical programming weights (PPW) algorithm. A numerical example provided illustrates the advantages and contributions of this approach. Proposed approach is anticipated to help a decision maker select a suitable security tool by taking advantage of experts' experience, with noises eliminated, as well as the accuracy of mathematical optimization methods.

• Applied Chemistry for Engineering
• /
• v.31 no.4
• /
• pp.443-451
• /
• 2020

In this study, the physico-chemical properties and pyrolysis kinetics of livestock mature solid fuel were investigated to know its feasibility as a fuel. Ultimate and proximate analysis results showed that livestock mature solid fuel has high contents of volatile matter (64.94%), carbon (44.35%), and hydrogen (5.54%). The low heating value of livestock mature solid fuel (3880 kcal/kg) was also higher than the standard requirement of solid fuel (3000 kcal/kg). Thermogravimetic analysis results indicated that livestock mature solid fuel has three decomposition temperature regions. The first temperature zone (130~330 ℃) was consisted with the vaporization of extracts and the decomposition of hemicellulose and cellulose. The second (330~480 ℃) and third (550~800 ℃) temperature regions were derived from the decomposition of lignin and additional decomposition of carbonaceous materials, respectively. The activation energy derived from model free kinetic analysis results including Friedman, Flynn-Wall-Ozawa (FWO), and Kissinger-Akahira-Sunose (KAS) methods for the pyrolysis of livestock mature solid fuel was in the range of 173.98 to 525.79 kJ/mol with a conversion rate of 0.1 to 0.9. In particular, the activation energy increased largely at the higher conversion than 0.6. The kinetic analysis using a curve-fitting method suggested that livestock mature solid fuel was decomposed via a multi-step reaction which can be divided into five decomposition steps.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.3
• /
• pp.678-684
• /
• 2013

This paper describes a low-power baseband circuit for SAW-less LTE-Advanced transmitters. The proposed transmitter baseband circuit consists of a 2nd-order Tow-Thomas type active RC-LPF and a 1st-order passive RC LPF. It can provide a 7 multi-channel cut-off frequencies and wide gain control range of -41 dB ~ 0 dB with a 1-dB step. The proposed 2nd-order active RC-LPF adopts an op-amp in which three other sub-op amps are in parallel connected to reduce DC current for different cutoff frequency. In addition, each sub-op amp adopts both Miller and feed-forward phase compensation method to achieve an UGBW of more than 1-GHz with a small DC power consumption. The proposed baseband circuit is implemented in 65-nm CMOS technology, consuming DC power from 6.3 mW to 24.1 mW from a 1.2V supply voltage for each different cut-off frequency.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.1
• /
• pp.15-19
• /
• 2005

Conventional eddy current testing has been used for the detection of the defect-like fatigue crack in the conductive materials, such as aluminum, which uses a sinusoidal signal with very narrow frequency bandwidth, Whereas, the pulsed eddy current method uses a pulse signal with a broad bandwidth. This can allow multi-frequency eddy current testing, and the penetration depth is greater than that of the conventional eddy current testing. In this work, a pulsed eddy current instrument was developed for evaluating the metal loss. The developed instrument was composed of the pulse generator generating the maximum square pulse voltage of 40V, an amplifier controlled up to 52dB, an A/D converter of 16 bit and the sampling frequency of 20 MHz, and an industrial personal computer operated by the Windows program. A pulsed eddy current probe was designed as a pancake type in which the sensing roil was located inside the driving roil. The output signals of the sensing roil increased rapidly wich the step pulse driving voltage かn off, and the latter part of the sensing coil output voltage decreased exponentially with time. The decrement value of the output signals increased as the thickness of the aluminum test piece increased.

• The Journal of the Korea Contents Association
• /
• v.13 no.4
• /
• pp.481-496
• /
• 2013

The purpose of this study was to make a basic research on college cultural contents education in an effort to step up the manifestation of the creativity of cultural contents experts in line with the development of the fast-changing era of creative economy. It's basically meant to analyze the characteristics of cultural contents education in relation to creative idea to seek practical ways of improving that education. What problems there were with cultural contents education and how that education was actually provided were analyzed to suggest some of the right directions for client-centered cultural contents education. Earlier studies were analyzed, and the results of a survey that was conducted on students whose major was linked to cultural contents were analyzed as well. As a result, current cultural contents education was considered not to be satisfactory due to existing teaching methods, learning process and curriculums that were devoid of creativity. To rectify the situation, interdisciplinary attempts should be made such as multi-major, interdisciplinary programs or convergence education, and plenty of experiments, sufficient practice and an increase in the number of faculty members are all required. In terms of education, existing curriculums and courses should urgently be revamped to strengthen field placement and creative discussions. As for educational methods, the lecture method should be avoided, and specialized education should be offered instead, which should strike a balance between discussion, team play and project education. It is expected to produce good results if there are appropriate connection among different major fields of study and the harmonious implementation of diverse internship, convergence and field placement programs.

• Korean Journal of Occupational Health Nursing
• /
• v.14 no.1
• /
• pp.56-70
• /
• 2005

Objectives: The purpose of this study is to develop a linking model between industrial injury insurance organs and local organizations providing social welfare health services, for the activation of medical rehabilitation services for industrial injury patients. Method: Research design for this study was a multi-step research through literature review, field research, and group interviews with persons in charge, to compare local society-oriented medical rehabilitation programs. The term of researches Sep.1 ~ Nov. 30, 2004. Results: 1. Home nurses from Workers Accident Medical Corporation have been taken to be adequate to case managers, who link industrial accident insurance institutions to local society services for the activation of medical rehabilitation services for industrial injury patients. They have been chosen for case managers because they have richer understanding and experiences of objects of industrial accidents than any other specialists, and because they have proved to be able to provide direct home services as a specialist. We have established the center for case management affairs within the workers accident general hospital, organized the committee for case management with doctors in charge, doctors in rehabilitation, rehabilitation consultants, social welfare workers, physical therapists, and nurses, determined objects of case managements from those of long-term recuperation, and constructed a course of case management containing from case management plans to evaluation. 2. We have made files of community resources, and organized the council of industrial accident administration to have it in charge of the adjustment and linking of services in case management affairs. 3. Because there are inequality of community resources between areas, differences in experiences in and bases for linking, and disparity of core organizations with active linking in the system of linking between public and civil sectors, we have taken a system of linking between parallel organs to be the core. In our linking model, workers accident general hospital, hospitals designated for industrial injury, and rehabilitation hospitals are linked in parallel, inadequate long-term recuperation managers are trusted to an workers accident medical corporations through examination by the examination committee in Korea Labor Welfare Corporation, and are dealt with by the committee for case management. Of the hospitals designated for industrial accidents, those running a home caring center provide home caring services for the handicapped at home from industrial injury. 4. Workers Accident Medical Corporation take part in medical rehabilitation, and Korea Labor Welfare Corporation in vocational/social rehabilitation. Furthermore, in the model, the latter should construct a system for job opportunities through Internet portals and provide cyber vocational consultation and introduction. Conclusion: Improvement of systems is needed to apply the linking model to practical affairs. Because this model is centered for practical affairs, it should be put under the analysis of effects, and evaluation of its adequacy to practical application, and its effects and efficiency through experimental running in the 8 workers accident general hospital in Korea.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.1
• /
• pp.11-20
• /
• 2010

Oyster production is playing an important role in domestic aquaculture, but facing some problems such as exports decrease, a slowdown in domestic demand and marine environmental deterioration. In order to obtain the suitable and sustainable oyster production, suitable sites selection is an important step in oyster aquaculture. This study was conducted to identify the suitable sites for lunging culture of oyster using Geographic Information System(GIS)-based multi-criteria evaluation methods. Most of the parameters were extracted by Inverse Distance Weighted(IDW) methods in GIS and eight parameters were grouped into two basic sub-models for oyster aquaculture, namely oyster growth sub-model(Sea Temperature, Salinity, Hydrodynamics, Chlorophyll-a) and environment sub-model(Bottom DO, TOC, Sediment AVS, Benthic Diversity). Suitability scores were ranked on a scale from 1(leased suitable) and 8(most suitable), and about 80.1% of the total potential area had the highest scores 5 and 6. These areas were shown to have the optimum condition for oyster culture in GeojeHansan Bay. This method to identify suitable sites for oyster culture may be used to develop bivalve culture management system for supporting a decision making.