• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1244-1245
• /
• 2008

Recently, piezoelectric transformer is applied to wide fields. Multi layer piezoelectric transformer has the advantage of high step up ratio, electromechanical coupling coefficient(Kp) and mechanical quality factor(Qm), but is indicated of peeling-phenomenon of electrode, rising sintering temperature made price of costly electrode. So in this study, it discuss on method for fabrication of rosen type piezoelectric transformers. For the fabrication as rosen type piezoelectric transformers, synthesized the powder using 0.01Pb$(ni_{1/3}Nb_{2/3})O_3$ - 0.08Pb$(Mn_{1/3}Nb_{2/3})O_3$ - 0.91Pb$(Zr_{0506}Ti_{0496})O_3$ (abbreviated as PNN-PMN-PZT) ceramics. The density, microstructure, dielectric and piezoelectric properties as a function of sintering temperature were investigated. The results indicated that the optimized properties of ceramics were obtained at sintering temperature of 1200$^{\circ}C$, showed the value of $d_{33}$=273pC/N, $K_p$=0.60 $Q_m$=1585, ${\varepsilon}_r$=1454, density=7.917$g/cm^3$ and $tan{\delta}$=0.0064.

• 한국정보통신학회논문지
• /
• 제19권8호
• /
• pp.1780-1784
• /
• 2015

현재의 IP 라우팅은 Layer 3 라우팅 정보를 이용하여 Forwarding시 Destination Address만을 참조하며 Destination-Based Routing Lookup은 모든 Hop에서 필요하다. 따라서 모든 라우터는 Full Internet 라우팅 정보, 약 12만 여개의 라우트 정보를 필요로 할 수 있으며 라우터는 이러한 폭주에 따라 트래픽 부하를 분산 할 수 있는 환경 구성이 필요하다. 본 연구에서는 인터넷 기존망의 고유 특징인 Best Effect 환경에서 대용량 멀티미디어 데이터 전송의 QoS 보장과 하드웨어적 고속 스위칭을 위해 Labeling을 이용하여 packet을 forwarding하는 환경 구성이 필요하다. 데이터 전송을 고성능화하기 위해서 라벨링망의 여러 단계의 정책보다는 프로세스 등 자원 효율화와 단순화 정책이 효과적인지 연구를 통해 알아보며 그 방안으로 일명 lock-up 라벨링망 Header Format으로 고정시켜 단순화된 정책으로 보다 QoS에 효과적인 정책을 적용하는 방법을 고찰한다.

• 한국정보통신학회논문지
• /
• 제16권7호
• /
• pp.1477-1486
• /
• 2012

본 논문에서는 가상시점 깊이영상 생성 기법을 이용한 다양한 시점의 CGH(computer generated hologram) 생성 시스템을 제안한다. 제안한 시스템에서는 먼저 TOF(time of flight) 깊이 카메라를 이용하여 신뢰도 높은 기준시점 깊이영상을 획득하고 카메라 보정 과정을 통해 기준시점 카메라들의 카메라 파라미터를 추출한다. 가상시점 카메라의 위치가 정의되면 기준시점 카메라와의 거리와 위치를 고려하여 최적의 기준시점 카메라들을 선택한다. 가상시점 카메라와 가장 가까운 기준시점 카메라를 주 기준시점으로 결정하고 가상시점 깊이영상을 생성한다. 주 기준시점 카메라와 위치가 반대인 기준시점 카메라를 보조 기준시점으로 선택하여 가상시점 깊이영상을 생성한다. 주 기준시점을 통해 생성된 가상시점 깊이영상에 나타나는 가려짐 영역을 보조 기준시점으로 생성된 가상시점 깊이영상으로부터 찾아 보상한다. 보상이 되지 않고 남은 홀영역은 주변값 중 가장 작은 값으로 채워 최종 가상시점 깊이영상을 생성한다. 최종 가상시점 깊이 영상을 이용하여 CGH를 생성한다. 실험을 통해 기존의 기법보다 제안하는 가상시점 깊이영상 합성 시스템의 성능이 우수함을 확인하였다.

• International Journal of Automotive Technology
• /
• 제8권1호
• /
• pp.27-31
• /
• 2007

The number of vehicles employing diesel engines is rapidly rising. Accompanying this trend, application of an after-treatment system is strictly required as a result of reinforced exhaust regulations. The Diesel Particulate Filter (DPF) system is considered as the most efficient method to reduce particulate matter (PM), but the improvement of a regeneration performance at any engine operation point presents a considerable challenge by itself. Therefore, the present study evaluates the effect of fuel injection characteristics on regeneration performance in a DOC and a catalyzed CR-DPF system. The temperature distribution on the rear surface of the DOC and the exhaust gas emission were analyzed in accordance with fuel injection strategies and engine operating conditions. A temperature increase more than BPT of DPF system was obtained with a small amount fuel injection although the exhaust gas temperature was low and flow rate was high. This increase of temperature at the DPF inlet cause PM to oxidize completely by oxygen. In the case of multi-step injection, the abrupt temperature changes of DOC inlet didn't occur and THC slip also could not be observed. However, in the case of pulse type injection, the abrupt injection of much fuel results in the decrease of DOC inlet temperatures and the instantaneous slip of THC was observed.

• Journal of Mechanical Science and Technology
• /
• 제19권5호
• /
• pp.1072-1079
• /
• 2005

Conceptual design is the first step in the overall process of product design. Its intrinsic uncertainty, imprecision, and lack of information lead to the fact that current conceptual design activities in engineering have not been computerized and very few CAD systems are available to support conceptual design. In most of the current intelligent design systems, approach of principle synthesis, such as morphology matrix, bond graphic, or design catalogues, is usually adopted to deal with the concept generation, in which optional concepts are generally combined and enumerated through function analysis. However, as a large number of concepts are generated, it is difficult to evaluate and optimize these design candidates using regular algorithm. It is necessary to develop a new approach or a tool to solve the concept generation. Generally speaking, concept generation is a problem of concept synthesis. In substance, this process of developing design candidate is a combinatorial optimization process, viz., the process of concept generation can be regarded as a solution for a state-place composed of multi-concepts. In this paper, genetic algorithm is utilized as a feasible tool to solve the problem of combinatorial optimization in concept generation, in which the encoding method of morphology matrix based on function analysis is applied, and a sequence of optimal concepts are generated through the search and iterative process which is controlled by genetic operators, including selection, crossover, mutation, and reproduction in GA. Several crucial problems on GA are discussed in this paper, such as the calculation of fitness value and the criteria for heredity termination, which have a heavy effect on selection of better concepts. The feasibility and intellectualization of the proposed approach are demonstrated with an engineering case. In this work concept generation is implemented using GA, which can facilitate not only generating several better concepts, but also selecting the best concept. Thus optimal concepts can be conveniently developed and design efficiency can be greatly improved.

• 약학회지
• /
• 제40권3호
• /
• pp.351-356
• /
• 1996

The preparation of Enterococcus faecalis RSI is used as a therapeutics for human intestinal disorders. However, the microbe in this preparation is usually very sensitive to rifampicin and fluoroquinolones. If this preparation is taken with rifampicin or fluoroquinolones, its therapeutic effect can not be expected. E. faecalis RFR11, containing resistance to rifampicin was obtained by MNNG mutation method. Serial passage of E. faecalis RFR11 produced E. feacalis OFR16 on agar with 2-fold minimal inhibitory concentration of ofloxacin produced. E. feacalis OFR16 was resistant to fluoroquinolones up to 8-256 fold higher than that for the original strain. E. faecalis OFR16 also exhibited identical characteristics with the parent strain when they were tested for lactic acid formation and growth inhibition of E. coli MB4-5737 and Shigella sonnei MB4-10411. From in vitro test, it was identified that rifampicin and ofloxacin is not inactivated by certain factors of E. faecalis OFR16. Conclusively. E. faecalis OFR16, rifampicin and fluoroquinolones resistant mutant, is an efficient strain that has insensitivity against rifampicin and fluoroquinolones and original biochemical characteristics of the parent strain.

• 한국생산제조학회지
• /
• 제25권2호
• /
• pp.124-131
• /
• 2016

Several research works for finding and optimizing the methods of dispensing high viscosity phosphor used in the fabrication of white LED's are currently in progress. High viscosity phosphor dispensing with a high accuracy is crucial because the dispensing rate and uniformity directly affect parameters such as the CIE chromaticity diagram, color temperature and luminous flux of white LED's. This study presents a novel method of dispensing high viscosity phosphor using electrohydrodynamic printing. The dispensing rate was optimized less than 0.01 mg phosphor using experiments and optimizing the process parameters including the standoff distance from the nozzle to the substrate, ink supply pressure, and multi-step pulsed waveform magnitude ratio. The dispensing rate was measured by dispensing 20 dots using drop-on-demand with the optimized parameters, and the experiments were repeated 10 times to maximize the data accuracy. The average dispensing rate that can be reliably used for high viscosity phosphor dispensing was 0.0052 mg.

• 한국통신학회논문지
• /
• 제36권12A호
• /
• pp.966-974
• /
• 2011

본 논문에서는 컨테이너 항만 환경에서 적용 가능한 자산 추적 시스템을 제안한다. 컨테이너 항만 환경은 우선 통신을 저해하는 철제 장애물이 산재하기 때문에, 태그 대 다수 리더 간 가시선 통신을 필요로 하는 기존 태그-리더 기반의 위치 추적 시스템의 적용이 힘들다. 이러한 문제를 해결하기 위해, 제안하는 시스템은 기존 리더뿐 아니라 이동체에 리더를 추가하고, 2단계의 위치 추적을 함으로써 태그와 다수 리더 간의 정보를 취득한다. 또한 소수의 거리 정보를 측정하였을 때, 항만 자산의 동선 정보를 함께 이용하는 방법으로 태그 위치 추정 성공률과 정확도를 높인다. 그리고 제안하는 시스템의 성능 검증을 위해 태그, 리더 및 위치 엔진을 구현하였고, 실제 항만 터미널에 설치하여 운용하였다. 그 결과 성공률과 정확도가 확연히 개선되어 실제 환경에서 운용 가능함을 확인할 수 있었다.

• 한국정보통신학회논문지
• /
• 제3권1호
• /
• pp.185-196
• /
• 1999

본 논문에서는 부분 그래프 패턴과 신경망을 이용한 새로운 한글 오프라인 인식 시스템을 제안하였다. 문자를 입력으로 받아 세선화를 행한 후 위치에 관한 잡음 제거 기능을 갖는 균형화를 수행하고 인식단의 첫번째 단계에서 순환 성분을 추출하고 인식한다. 부블럭 HT 공간에서 끝점, 굴곡점, 분기점의 특징점을 추출하고 추출된 특징점 사이의 관계를 조사하여 부분 그래프 패턴을 구성한다. 종모음이 올 수 있는 구역을 할당하고 종모음 후보점을 추출하여 미리 조사된 부분 그래프 패턴 사전과 비교하여 종모음을 추출한다. 같은 방법으로 횡모음을 추출한 후 간단한 구조 해석적 방법으로 모음을 인식한다. 본 논문의 성능비교를 위하여 실험은 활자체의 경우 가장 많이 쓰이는 명조체와 고딕체 그리고 필기체를 대상으로 한다. 고딕체의 경우 인식율 98.9%, 명조체의 경우 인식율 98.2%, 필기체의 경우 92.5% 이었다. 다중 자형 인식을 위하여 필기체와 활자체의 구분 없이 구한 전체 시스템의 인식율은 94.8% 이었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.64-64
• /
• 2000

Since its discovery in 1991, the carbon nanotube has attracted much attention all over the world; and several method have been developed to synthesize carbon nanotubes. According to theoretical calculations, carbon nanotubes have many unique properties, such as high mechanical strength, capillary properties, and remarkable electronical conductivity, all of which suggest a wide range of potential applications in the future. Here we report the synthesis in the catalytic decomposition of acetylene at ~65 $0^{\circ}C$ over Ni deposited on SiO2, For the catalyst preparation, Ni was deposited to the thickness of 100-300A using effusion cell. Different approaches using porous materials and HF or NH3 treated samples have been tried for synthesis of carbon nanotubes. It is decisive step for synthesis of carbon nanotubes to form a round Ni particles. We show that the formation of round Ni particles by heat treatment without any pre-treatment such as chemical etching and observe the similar size of Ni particles and carbon nanotubes. Carbon nanotubes were synthesized by chemial vapour deposition ushin C2H2 gas for source material on Ni coated Si substrate. Ni film gaving 20~90nm thickness was changed into Ni particles with 30~90nm diameter. Heat treatment of Ni fim is a crucial role for the growth of carbon nanotube, High-resolution transmission electron microscopy images show that they are multi-walled nanotube. Raman spectrum shows its peak at 1349cm-1(D band) is much weaker than that at 1573cm-1(G band). We believe that carbon nanotubes contains much less defects. Long carbon nanotubes with length more than several $\mu$m and the carbon particles with round shape were obtained by CVD at ~$650^{\circ}C$ on the Ni droplets. SEM micrograph nanotubes was identified by SEM. Finally, we performed TEM anaylsis on the caron nanotubes to determine whether or not these film structures are truly caron nanotubes, as opposed to carbon fiber-like structures.