• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.3
• /
• pp.69-81
• /
• 2006

In this paper, an adaptive algorithm is proposed in streaming MPEG-4 contents with fluctuating resource amount such as throughput of network conditions. In the area of adaptive streaming issue, a lot of researches have been made on how to represent encoded media(such as video) bitstream in scalable way. By contrast, MPEG-4 supports object-based multimedia content which is composed of various types of media streams such as audio, video, image and other graphical elements. Thus, it can be more effective to provide individual media streams in scalable way for streaming object-based content to heterogeneous environment. The proposed method provides the multiple media streams corresponding to an object with different qualities and bit rate in order to support object based scalability to the MPEG-4 content. In addition, an optimal selection of the multiple streams for each object to meet a given constraint is proposed. The selection process is adopted a multiple choice knapsack problem with multi-step selection for the MPEG-4 objects with different scalability levels. The proposed algorithm enforces the optimal selection process to maintain the perceptual qualities of more important objects at the best effort. The experimental results show that the set of selected media stream for presenting objects meets a current transmission condition with more high perceptual quality.

• Composites Research
• /
• v.16 no.6
• /
• pp.1-9
• /
• 2003

In this paper, probabilistic failure analysis based on Weibull distribution function is proposed to predict the fiber strength of composite pressure vessel. And, experimental tests were performed using fiber strand specimens, unidirectional laminate specimens and composite pressure vessels to confirm the volumetric size effect on the fiber strength. As an analytical method, the Weibull weakest link model and the sequential multi-step failure model are considered and mutually compared. The volumetric size effect shows the clearly observed tendency towards fiber strength degradation with increasing stressed volume. Good agreement of fiber strength distribution was shown between test data and predicted results for unidirectional laminate and hoop ply in pressure vessel. The site effect on fiber strength depends on material and processing factors, the reduction of fiber strength due to the stressed volume shows different values according to the variation of material and processing conditions.

• YAKHAK HOEJI
• /
• v.42 no.2
• /
• pp.175-180
• /
• 1998

Bifidobacterium bifidum OFR9 that exhibits acquired resistance to rifampicin and fluoroquinolones was selected by MNNG and multi-step mutation method. To investigate the resistance mechanism to rifampicin in the strain, RNA polymerase from B. bifidum parent strain and rifampicin-resistance OFR9 was partially purified and its sensitivity to rifampicin was assayed. The profile of RNA polymerase preparation of B. bifidum parent and B. bifidum OFR9 is similar to that of E. coli RNA polymerase that includes the basic subunits of ${\beta}$`, ${\beta},\;{\sigma},\;{\alpha}$ but which are a little different in size when they are compared with E. coli RNA polymerase subunits. RNA polymerase isolated from the parent strain was inhibited by 1${\mu}$g/ml rifampicin but that from B. bifidum OFR9 was not affected by 100${\mu}$g/ml concentration of rifampicin. RNA polymerase activity of B. bifidum OFR9 was maintained over 90% through that rifampicin concentration. This result is consistent with MIC values of in vitro test. It can be concluded that the mechanism of rifampicin resistance in B. bifidum OFR9 is due to an alteration of RNA polymerase.

• Archives of Pharmacal Research
• /
• v.27 no.10
• /
• pp.1048-1052
• /
• 2004

A 1, 2-diglyceride-based multi-step colorimetric assay to measure the pancreatic lipase activity was applied for the determination of the kinetic profiles of the lipase inhibition with a slight modification and the validity verification. With this assay method, our study revealed that platycodin D, one of major constituents of Platycodi Radix, inhibits the pancreatic lipase activity in a competitive type, with the value of $K_I$ being 0.18${\pm}$0.02 mM. In addition, PD has affected the values of $K_{m,app}\;and\;K_{cat}/K_m$ in a dose- dependent manner. The results shed a meaningful light on how PD mediates lipid metabolism in the intestinal tracts. On the other hand, since the revised assay is sensitive, rapid, and does not affect the accuracy to the kinetic properties, it is applicable not only to evaluation of the kinetic properties of the pancreatic lipase, but also to highthroughput screening of pancreatic lipase activity.

• The Research Journal of the Costume Culture
• /
• v.10 no.6
• /
• pp.680-696
• /
• 2002

The aim of this study was to identify the components of customer-based fashion brand equity which was built from customers´perception to equity. As a method, both literature review and empirical research were made. This study performed in three stages from May to November in 2001. In the exploratory step. focus-group interview was conducted 5 times for gathering responses related to fashion brand equity, and free association test of 17 respondents was additionally conducted. In pilot study, 40 university students were surveyed and the data were analyzed in order to identify the components of fashion brand equity and to develop questionnaire. In the main research, 905 university students evaluated fashion brand equity in order to analyze the components of fashion brand equity in customers´perception. Statistical analyses were performed with SAS program using factor analysis, cronbach´α, frequency, and mean. The results of this study was as fellows. First, fashion brand equity was defined in terms of four components; customer-brand resonance, brand imagery/customer feeling, brand performance/customer judgment and brand awareness. Second, fashion brand equity was multi-dimensional brand attitude, which could be measured by 29 variables that were different from uni-dimensional evaluation of previous studies.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.5
• /
• pp.21-33
• /
• 2012

This paper presents the new maximum power point tracking(MPPT) control of the photovoltaic(PV) module integrated converter(MIC) system considering the shadow influence. The output characteristics of the solar cell is a nonlinear and affected by a temperature, the solar radiation and influence of a shadow. Particularly, MIC system is very sensitive to the shadow influence because the capacity is very small. In order to increase an output and efficiency of the solar power generation, the maximum power point(MPP) obeying control are necessary. Conventional perturbation and observation(PO) and Incremental conductance(IC) are the method finding MPP by the continued self-excitation vibration. The MPPT control is unable to be performed by rapid output change affected by the shadow. To solve this problem, the new control algorithm of the multi-level in which the step value changes by output change is presented. In case there are the solar radiation, a temperature and shadow influence, the presented algorithm treats and compares the conventional control algorithm and output error. In addition, the validity of the algorithm is proved. through the output error response characteristics.

• Journal of Broadcast Engineering
• /
• v.6 no.3
• /
• pp.225-233
• /
• 2001

Real-time video communication applications over Internet should be able to support such functionality as scalability because of the unpredictable and varying channel bandwidth between server and client. To accommodatethe wide variety of channel bitrates, a new scalable coding tool, namely the Fine Granular Scalability (FGS) coding tool has been reduce the adopted In the MPEG-4 video standard. This paper presentsa new FGS algorithm with matching Pursuit that can reduce the computational complexity of ordinal matching pursuit-based algorithm. The Proposed coding algorithm can make trade-off between Picture Quality and computationalcomplexity. Our simulation result shows that the proposed algorithm can reduce the computational cumplexity up to 1/5 compared to the conventional FGS method while retaining a similar picture quality.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.285-287
• /
• 2008

AAO(Anodic Aluminum Oxidation) method has been known that it is practically useful for the fabrication of nano-structures and makes it possible to fabricate the highly ordered nano masters on large surface and even on the 2.5 or 3D surface at low cost comparing to the expensive e-beam lithography or the conventional silicon processing. In this study, by using the multi-step anodizing and etching processes, highly ordered nano patterned master with concave shapes was fabricated. By varying the processing parameters, such as initial matter and chemical conditions; electrical and thermal conditions; time scheduling; and so on, the size and the pitch of the nano pattern can be controlled. Consequently, various alumina/aluminum nano structures can be easily available in any size and shape by optimized anodic oxidation in various aqueous acids. In order to replicate nano patterned master, the resulting good filled uniform nano molded structure through electro-forming process shows the validity of the fabricated nano pattern masters.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.7
• /
• pp.136-144
• /
• 2004

Optimal process and system to produce the laser welded tube for one body formed bumper beam are studied. The calculated size of tube is a thickness of 1.4mm, diameter of 105.4mm and length of 2000mm. The tube is shaped from a cold rolled high strength steel sheet(tensile strength: 60kgf/$\textrm{mm}^2$ grade). Two roll bending method is the optimal tube shaping process compared to UO-bending, bending on press brake, multi-step continuous roll forming and 3 roll bending methods. Weld quality monitoring and seam tracking along the butt-joint lengthwise to the tube axis are also studied. The longitudinal butt-joint is welded by the $CO_2$ laser welding system equipped with a seam tracker and plasma sensor. The constructed $CO_2$laser tube welding system can be used for the precision seam tracking and the real-time monitoring of weld quality. Finally, the obtained laser welded tube can be used for one-body formed automobile bumper beam.

• YAKHAK HOEJI
• /
• v.36 no.4
• /
• pp.370-378
• /
• 1992

A simple and sensitive high performance liquid chromatographic method to quantitate ${\alpha}-keto$ acids in serum and urine was investigated. ${\alpha}-Keto$ acids react with 1,2-diamino-4,5-methylenedioxybenzene (DMB) in the presence of 2-mercapto-ethanol and sodium hydrogen sulfite to form highly fluorescent derivatives, substituted 6,7-methylenedioxyquinoxalinol. The derivatization procedure was performed in water bath at $100^{\circ}C$, and completed within 50 min. By the use of a reversed-phase column and multi-step gradient with two solvents, a mixture containing twelve of these derivatives were efficiently resolved within 35 minutes. The optimal wavelengh of the fluorescence detector are ${\lambda}_{ex}=364\;nm$ and ${\lambda}_{em}=445\;nm$. The quantitation of the individual ${\alpha}-Keto$ acids was reproducible with relative standard deviation of $3.0{\sim}7.9%$ and had a detection limits of $10{\sim}60$ fmol, except for p-hydroxyphenylpyruvic acid (960 fmol).