• IE interfaces
• /
• v.16 no.spc
• /
• pp.14-20
• /
• 2003

This paper presents a multi-criteria decision model and Multi-Criteria Generic Algorithm(MCGA) approach to improve backbone topology by leveraging the Virtual Link(VL) system in an hierarchical Link-State(LS) routing domain. Given that the sound backbone topology structure has a great impact on the overall routing performance in an hierarchical LS domain, the importance of this research is evident. The proposed decision model is to find an optimal configuration of VLs that properly meets two-pronged engineering goals in installing and maintaining VLs: i.e., operational costs and network reliability. The experiment results clearly indicates that it is essential to the effective operations of hierarchical LS routing domain to consider not only engineering aspects but also specific benefits from systematical layout of VLs, thereby presenting the validity of the decision model and MCGA.

• Journal of Korea Multimedia Society
• /
• v.20 no.4
• /
• pp.593-605
• /
• 2017

In applications which are covered wide range, it is possible that one or more number of Unmanned Aerial Vehicle(UAV) squadrons are used to perform a mission. In this case, it is most important to communicate seamlessly between the UAV squadrons. In this paper, we applied the modified OLSR(OSLR-Pds) which can prediction for state of the link for the communication in UAV squadron, and applied the modified AOMDV which can build multi-path for the communication between UAV Squadrons. The mobility of nodes are modeled using Gauss-Markov algorithm, and relative speed between nodes were calculated by derive equation of movement, and thereby we can predict link state for in a squadron and between squadrons. An experiment for comparing AODV, AOMDV and the proposed routing protocol was conducted by three factors such as packet delivery ratio, end to end delay, and routing overhead. In experiment result, we make sure that the proposed protocol performance are superior in these three factors. However, if the density of the nodes constituting FANET are too low, and if the moving speed of node is very slow, there is no difference to others protocols.

• Proceedings of the Korean Statistical Society Conference
• /
• 2002.11a
• /
• pp.119-124
• /
• 2002

We consider a multi-state flow network consisted of undirected links and focus on how to find efficiently the union of minimal paths transmitting a required flow when minimal paths are known.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.3 no.1
• /
• pp.26-51
• /
• 2009

In this paper, we propose an empirical framework for modeling and emulating interference in multi-hop wireless ad-hoc networks. Wireless interference causes wide variation in the frame delivery rate at a link, and thus we cannot represent the state of the link with only two states, connected state and disconnected state, as in wired networks. We first investigate wireless interference in detail, in order to accurately calibrate the interference and identify its underlying attributes, and then we simulate the diverse occurrences and effects of interference, after incorporating the scheme into a simulation tool. Based on these observations, we devise a modeling and simulation framework with several control parameters, and perform an extensive set of simulation studies. The simulation results indicate that the proposed framework enables us to examine various attributes of wireless interferences and their effects on wireless network protocols and systems.

• ETRI Journal
• /
• v.35 no.5
• /
• pp.919-922
• /
• 2013

A MIMO multi-way relay channel with full data exchange in which K users exchange messages with each other via the help of a single relay is considered. For the case in which each link is quasi-static Rayleigh fading and the relay is full-duplex, the fundamental diversity-multiplexing tradeoff (DMT) is investigated, and we show that a compress-and-forward relay protocol can achieve the optimal DMT.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1D
• /
• pp.43-50
• /
• 2011

The monitoring system for link travel speed using taxi probe is one of key sub-systems of ITS. Link travel speed collected by taxi probe has been widely employed for both monitoring the traffic states of urban road network and providing real-time travel time information. When sample size of taxi probe is small and link travel time is longer than a length of time interval to collect travel speed data, and in turn the missing state is inevitable. Under this missing state, link travel speed data is real-timely not collected. This missing state changes from single to multiple time intervals. Existing single interval prediction techniques can not generate multiple future states. For this reason, it is necessary to replace multiple missing states with the estimations generated by multi-interval prediction method. In this study, a multi-interval prediction method to generate the speed estimations of single and multiple future time step is introduced overcoming the shortcomings of short-term techniques. The model is developed based on Non-Parametric Regression (NPR), and outperformed single-interval prediction methods in terms of prediction accuracy in spite of multi-interval prediction scheme.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.2
• /
• pp.670-683
• /
• 2016

Network coding, as a new technique to improve the throughput, is studied combined with multi-relay model in this paper to address the challenges of long distance and power limit in deep space communication. First, an amplify-and-forward relaying approach based on analog network coding (AFNC) is proposed in multi-relay network to improve the capacity for deep space communication system, where multiple relays are introduced to overcome the long distance link loss. The design of amplification coefficients is mathematically formulated as the optimization problem of maximizing SNR under sum-power constraint over relays. Then for a dual-hop relay network with a single source, the optimal amplification coefficients are derived when the multiple relays introduce non-coherent noise. Through theoretic analysis and simulation, it is shown that our approach can achieve the maximum transmission rate and perform better over single link transmission for deep space communication.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.11
• /
• pp.2616-2635
• /
• 2013

In this paper, we propose an iterative transceiver design in a multi-relay multi-user multiple-input multiple-output (MIMO) system. The design criterion is to minimize sum mean squared error (SMSE) under relay sum power constraint (RSPC) where only local channel state information (CSI)s are available at relays. Local CSI at a relay is defined as the CSI of the channel between BS and the relay in the $1^{st}$ hop link, and the CSI of the channel between the relay and all users in the $2^{nd}$ hop link. Exploiting BS transmitter structure which is concatenated with block diagonalization (BD) precoder, each relay's precoder can be determined using local CSI at the relay. The proposed scheme is based on sequential iteration of two stages; stage 1 determines BS transmitter and relay precoders jointly with SMSE duality, and stage 2 determines user receivers. We verify that the proposed scheme outperforms simple amplify-and-forward (SAF), minimum mean squared error (MMSE) relay, and an existing good scheme of [13] in terms of both SMSE and sum-rate performances.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.22 no.2
• /
• pp.95-101
• /
• 2017

A simple and practical voltage balance method for a solid-state transformer (SST) is proposed to reduce the voltage difference of cascaded H-bridge converters. The tolerance device components in SST cause the imbalance problem of DC-link voltage in the H-bridge converter. The Max/Min algorithms of voltage balance controller are merged in the controller of an AC/DC rectifier to reduce the voltage difference. The DC-link voltage through each H-bridge converter can be balanced with the proposed control methods. The design and performance of the proposed SST are verified by experimental results using a 30 kW prototype.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.6
• /
• pp.2095-2110
• /
• 2015

This paper presents a design for a throughput-efficient online relay selection scheme for dual-hop multi-relay cooperative networks. Problems arise with these networks due to unpredictability of the relaying link quality and high time-consumption to probe the dual-hop link. In this paper, we firstly propose a novel probing and relaying protocol, which greatly reduces the overhead of the dual-hop link estimation by leveraging the wireless broadcasting nature of the network. We then formulate an opportunistic relay selection process for the online decision-making, which uses a tradeoff between obtaining more link information to establish better cooperative relaying and minimizing the time cost for dual-hop link estimation to achieve higher throughput. Dynamic programming is used to construct the throughput-optimal control policy for a typically heterogeneous Rayleigh fading environment, and determines which relay to probe and when to transmit the data. Additionally, we extend the main results to mixed Rayleigh/Rician link scenarios, i.e., where one side of the relaying link experiences Rayleigh fading while the other has Rician distribution. Numerical results validate the effectiveness and superiority of our proposed relaying scheme, e.g., it achieves at least 107% throughput gain compared with the state of the art solution.