• 대한토목학회논문집
• /
• 제34권1호
• /
• pp.61-71
• /
• 2014

본 연구에서는 건설용 복합소재 구조에 적합한 미시-거시적 멀티 스케일 접근 방법을 제시하고 고차항 이론에 기반한 유한요소 진동 해석을 수행하였다. 본 연구에서 제시하는 멀티-스케일 접근 방법에 의한 유한요소 모델은 해석의 정확성 뿐 만 아니라 재료 조합의 영향을 정확히 보여준다는 점에서 장점을 갖는다. 적용된 유한요소 모델은 화이버의 함침비율의 변화에 따른 적층 판 구조의 고유진동을 상세 분석하기 위하여 개발되었다. 특히, 본 연구에서 제시한 결과는 적층 구조의 보강각도, 적층배열, 그리고 길이-두께비 등과 화이버 함침비율의 변화의 상호작용을 분석하는 데 초점을 두었다. 수치해석 결과로부터 화이버와 모재의 조합의 영향은 거시적 동적 특성을 조절할 수 있으므로 무시되면 안되며, 최적 배합을 통하여 건설용으로서 우수한 동적 구조성능을 만족하도록 설계할 수 있음을 보여준다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1738-1740
• /
• 2003

This paper deals with the characteristic analysis of multi-grounding system. In order to assess the effectiveness of bonding two grounding systems, the scale model grounding simulation system and grid grounding conductors which were downsized as a scale factor of 100:1 were designed and fabricated. A profile of GPR(Grounding Potential Rise) of each case was measured. Also the measured results were compared with the analysis results.

• 한국전기전자재료학회논문지
• /
• 제27권12호
• /
• pp.767-775
• /
• 2014

New material design has obtained tremendous attention in material science community as the performance of new materials, especially in nano length scale, could be greatly improved to applied in modern industry. In certain conditions limiting experimental synthesis of these new materials, new approach by computer simulation has been proposed to be applied, being able to save time and cost. Recent development of computer systems with high speed, large memory, and parallel algorithms enables to analyze individual atoms using first principle calculation to predict quantum phenomena. Beyond the quantum level calculations, mesoscopic scale and continuum limit can be addressed either individually or together as a multi-scale approach. In this article, we introduced current endeavors on material design using analytical theory and computer simulations in multi-length scales and on multi-physical properties. Some of the physical phenomena was shown to be interconnected via a cross-link rule called 'cross-property relation'. It is suggested that the computer simulation approach by multi-physics analysis can be efficiently applied to design new materials for multi-functional characteristics.

• 대한토목학회논문집
• /
• 제39권6호
• /
• pp.903-911
• /
• 2019

공동구는 필수적인 사회기반시설 중의 하나이나, 국토계획법의 공동구 설치의무규모(200만㎡)로 인하여 공동구의 설치가 어려운 실정이다. 본 논문에서는 공동구 설치 활성화를 위하여 기존시가지에서의 공동구 설치에 대한 타당성을 분석하였다. 타당성 분석을 위하여 관련법규를 근거로 규모를 4가지로 분류하였으며, 타당성과 경제성 분석을 활용하여 관련지표 선정 및 평가를 진행하였다. 그 결과 기존시가지의 규모에 적합한 터널식 공동구는 3종/4종으로 나타났으며, 200만㎡ 이상의 신도시는 5종의 개착식 공동구가 적합한 것으로 분석되었다. 현재 공동구 설치 의무 규모인 신도시 200만㎡ 이상에서 개착식과 기존시가지의 터널식 공동구의 종합평가결과가 많은 차이를 보이지 않으므로, 기존시가지에서 다양한 규모의 공동구 설치가 타당하다는 것을 제시하고자 한다.

• Smart Structures and Systems
• /
• 제13권4호
• /
• pp.501-515
• /
• 2014

This paper presents a linear computational homogenization framework to evaluate the effective (or generalized) electromechanical coupling coefficient (EMCC) of adaptive structures with piezoelectric structural fiber (PSF) composite elements. The PSF consists of a silicon carbide (SiC) or carbon core fiber as reinforcement to a fragile piezo-ceramic shell. For the micro-scale analysis, a micromechanics model based on the variational asymptotic method for unit cell homogenization (VAMUCH) is used to evaluate the overall electromechanical properties of the PSF composites. At the macro-scale, a finite element (FE) analysis with the commercial FE code ABAQUS is performed to evaluate the effective EMCC for structures with the PSF composite patches. The EMCC is postprocessed from free-vibrations analysis under short-circuit (SC) and open-circuit (OC) electrodes of the patches. This linear two-scale computational framework may be useful for the optimal design of active structure multi-functional composites which can be used for multi-functional applications such as structural health monitoring, power harvest, vibration sensing and control, damping, and shape control through anisotropic actuation.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.114-117
• /
• 2008

Curved thick plate forming in shipbuilding industry is currently performed by a thermal process, called as Line Heating by using gas flame torches. It was examined as an alternative way in this study to manufacture curved thick plates by the multi-punch die forming. Experiments and finite element analyses were conducted to evaluate the feasibility of the reconfigurable discrete die forming to the thick plates. Configuration of the multi-punch dies suitable for multi-curvature was investigated. As a result, single step forming by reconfigurable discrete die with scale factor improved formability.

• 천문학회지
• /
• 제52권2호
• /
• pp.49-55
• /
• 2019

The New Vacuum Solar Telescope (NVST) is the largest solar telescope in China. When using CCDs for imaging, equal-thickness fringes caused by thin-film interference can occur. Such fringes reduce the quality of NVST data but cannot be removed using standard flat fielding. In this paper, a correction method based on multi-scale decomposition and adaptive partitioning is proposed. The original image is decomposed into several sub-scales by multi-scale decomposition. The region containing fringes is found and divided by an adaptive partitioning method. The interference fringes are then filtered by a frequency-domain Gaussian filter on every partitioned image. Our analysis shows that this method can effectively remove the interference fringes from a solar image while preserving useful information.

• Structural Engineering and Mechanics
• /
• 제83권3호
• /
• pp.283-292
• /
• 2022

A nonlinear vibrational analysis of sandwich curved panels having multi-scale face sheets has been performed in this article based on differential quadrature method (DQM). All mechanical properties of multi-scale skins have been established in the context of three-dimensional Mori-Tanaka scheme for which the influences of glass fibers and random carbon nanotubes (CNTs) have been taken into account. The governing equations for sandwich the panel have been developed based upon thin shell formulation in which geometry nonlinearities have been taken into account. Next, DQ approach has been applied to solve the governing equations for determining the relationships of frequencies with deflections for curved panels. It will be demonstrated that the relationships of frequencies with deflections are dependent on the changing of CNT weight fractions, fibers alignment, fibers volume, panel radius and skin thickness.

• 한국안전학회지
• /
• 제33권2호
• /
• pp.1-7
• /
• 2018

The multi-scale analysis is more proper and precise for composite materials because of considering the individual microscopic structure and properties of each material for composite materials. The purpose of this study is to verify the validity of using palladium particles in carbon/fiber composites by multi-scale analysis. The palladium is a material for itself to detect leaking hydrogen by using the property of adsorbing hydrogen. The macroscopic model material properties used in this study are homogeneous material properties from microstructure. Homogenized material properties that are calculated from periodic boundary conditions in the microscopic representative volume element model of each macroscopic analysis model. In this study, three macroscopic models were used : carbon fiber/epoxy, carbon fiber/palladium, palladium/epoxy. As a result, adding palladium to carbon/epoxy composite is not a problem in terms of strength.

• 한국안전학회지
• /
• 제34권2호
• /
• pp.7-14
• /
• 2019

A palladium can adsorb hydrogen and detect leaking hydrogen through changes in color and electrical resistance. This study is to evaluate the structural behavior of carbon fiber adding palladium composite materials used in the hydrogen storage vessel. A multi-scale analysis technique was used to analyze accurately the behavior of each material in relation to the microscopic composition. The multi-scale analysis is more proper and precise for composite materials because of considering the individual microscopic structure and properties of each material for composite materials. Also the crack evaluation was performed by XFEM analysis to confirm the reinforcement performance of aluminum as a liner of the hydrogen vessel. The results show that the addition of the palladium material increased the macroscopic stress, but microscopically the carbon fiber stress was reduced. It means the performance improvement of the palladium added carbon fiber/Al composite.