• Title/Summary/Keyword: Multi-resonant converter

Search Result 74, Processing Time 0.021 seconds

High-Efficiency & Cost-Effective Multi-Output LLC Resonant Converter Using Single Transformer (단일 변압기를 이용한 고효율.저가격형 다중출력 LLC 공진형 컨버터)

  • Cho, Sang-Ho;Yoon, Jong-Kyu;Han, Sang-Kyoo;Roh, Chung-Wook;Hong, Sung-Soo;Kim, Jong-Hae;Lee, Hyo-Bum
    • Proceedings of the KIPE Conference
    • /
    • 2008.06a
    • /
    • pp.238-240
    • /
    • 2008
  • 다양한 기능을 동시에 구현하는 최근의 전자제품을 위한 전력 시스템은 다양한 종류의 전원을 구비해야 하며, 고효율 저가격 특성이 필수적이다. 이를 위해 본 논문은 단일 변압기를 이용한 중 용량급의 고효율 저가격형 다중출력 LLC 공진형 컨버터를 제안한다. 제안된 컨버터는 단일 변압기를 이용하고, 요구되는 출력 당 추가된 1 개의 보조 스위치만으로 구현되므로 저가격화에 유리하다. 또한 제안된 회로의 모든 전력 스위치들은 ZVS 및 ZCS가 가능하므로 스위칭 손실을 최소화 할 수 있다. 최종적으로 제안된 컨버터 및 전원시스템의 우수성과 이론적 분석의 타당성 검증을 위해 42" FHD급 PDP용 전원회로를 위한 시작품을 제작하여 고찰된 실험결과를 제시한다.

  • PDF

The Power Supply for High Frequency Induction Heating by using the Current Resonance (전류공진을 이용한 고주파 유도가열용 전원장치)

  • Ra, B.H.;Lee, E.Y.;Song, D.H.;Suh, K.Y.;Lee, H.W.
    • Proceedings of the KIEE Conference
    • /
    • 2002.11d
    • /
    • pp.263-266
    • /
    • 2002
  • In this paper, It is indicating that an issues of the conventional boost converter for high frequency induction heating. To improve those issues, it is proposed, simulated and analyzed that the current resonant circuit, simulated. As the result, we knew that the proposed circuit has a good point to improve the waveform of input current and to make high efficiency. On the other side, in the inverter for the high current power supply, it is proposed that the high frequency inverter of the half bridge topology, be done the circuit analysis to extract the optimal circuit parameter. It is making sure of the soft switching operating by the inductor to reverse parallel connected on the inverter main switch, decreasing the surge voltage when the switch is turn-off by compulsion, and repressing the switch current and bringing the high current amplitude operation by the multi resonance.

  • PDF

Sinusoidal Current Control of Single-Phase PWM Converters under Voltage Source Distortion Using Composite Observer (왜곡된 전원 전압하에서 Composite 관측기를 이용한단상 PWM 컨버터의 정현파 전류 제어)

  • Nguyen, Thanh Hai;Lee, Dong-Choon;Lee, Suk-Gyu
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.16 no.5
    • /
    • pp.466-476
    • /
    • 2011
  • In this paper, a high-performance current control for the single-phase PWM converter under distorted source voltages is proposed using a composite observer. By applying the composite observer, the fundamental and high-order harmonic components of the source voltage and current are extracted without a delay. The extracted fundamental component is used for a phase-lock loop (PLL) system to detect the phase angle of the source voltage. A multi-PR (proportional-resonant) controller is employed to regulate the single-phase line current. The high-order harmonic components of the line current are easily eliminated, resulting in the sinusoidal line current. The simulation and experimental results have verified the validity of the proposed method.

A Study on the Contactless Power Supply System for Stokcer System (Stocker 시스템에 적용한 비접촉 전원장치에 관한 연구)

  • Hwang, Gye-Ho;Kim, Dong-Hee
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.21 no.1
    • /
    • pp.148-156
    • /
    • 2007
  • This paper explains stocker system that is operated in the long distance and linear area. The power system of stocker system uses Contactless Power Supply(CPS) to reduce problems of particle generation. The circuit configuration of CPS is simplified than the conventional ones, and the prototype is designed for commercial product. To transfer output data(information) from crane(secondary vehicle system) of the CPS to Primary system optical modem and TMS320F243(DSP, TI) are used between primary and secondary. power system are used, and the output voltage is controlled by operating frequency modulation. This paper is applied to stocker system controlled as one to one communication between the moving part(secondary system) and fixed part(primary system) of crane using optical modem. The study makes one to multi communication between fixed part and moving part for the purpose of multi crane operation of stocker system and must be done in the future.