• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.51-56
• /
• 2014

Thesedays, there are many smart device applications developed, especially on the using various sensors included in the smart device. Smart devices have several sensors which are camera, GPS, mike, and communication module for collecting ubiquitous environment, and many applications are developed by using such sensors. In this paper, we developed the multimedia stream architecture and examined the smart device applications based on open source with front and back-end server clouds for developing the conceptual architecture. Also, we examined the back-end distributed servers, realtime multimedia stream transferring, multi-media store, and media relay for other server and smart devices. We test the examined architecture on the real target environment to collect the SIP initial setup time, media stream delay, and end-to-end play time. The test results show that there have good network operation environment to provide realtime multimedia services, and we need to improve the end-to-end play time by minimizing the initial setup time.

• Transactions of the KSME C: Technology and Education
• /
• v.4 no.1
• /
• pp.3-10
• /
• 2016

Heat pump unit performance is represented by the COP(Coefficient of Performance) and expressed by the one point design condition according to KS C 9306. However, when heat pump operated to the real buildings, the simulations are changed continuously according to the actual weather conditions, the building load and heat pump source conditions. The purpose of this paper is to evaluate the APF(Annual performance factor) for a climate dependent building integrated air-to-air heat pump system in major cities in Korea. TRNSYS simulation tool with an international MV standard based IPMVP 4.4.2 was utilized to perform the annual performance analysis. The APF with the multi-performance data based method was calculated as 2.29 for Daejeon residential building case while Busan residential building case appeared as the highest with 2.36.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.515-527
• /
• 2009

IEEE 802.11n is an ongoing next-generation WLAN(Wireless Local Area Network) standard that supports a very high-speed connection with more than 100Mb/s data throughput measured at the MAC(Medium Access Control) layer. Study trends of IEEE 802.11n show two aspects, enhanced data throughput using aggregation among packets in MAC layer, and better data rates adapting MIMO(Multiple-Input Multiple-Output) in PHY(Physical) layer. But, the former doesn't consider wireless channel and the latter doesn't consider aggregation among packets for reality. Therefore, this paper analyzes data throughput for IEEE 802.11n considering MAC and PHY connection. A-MPDU(Aggregation-MAC Protocol Data Unit) and A-MSDU(Aggregation-MAC Service Unit) is adapted considering multi-service in MAC layer, WLAN MIMO TGn channel using SVD(Singular Value Decomposition) is adapted considering MIMO and wireless channel in PHY layer. Consequently, Simulation results shows throughput between A-MPDU and A-MSDU. Also, We use Ns-2(Network simulator-2) for reality.

• Journal of KIISE:Information Networking
• /
• v.31 no.4
• /
• pp.393-404
• /
• 2004

Recently, mSCTP (Mobile SCTP) has been proposed as a transport layer approach for supporting mobility. mSCTP is based on the ‘multi-homing’ feature of Stream Control Transmission Protocol(SCTP), and utilize the functions to dynamically add or delete IP addresses of end points to or from the existing connectionin order to support mobility. In this paper, we propose a mechanism to determine when to add or delete an W address, utilizing the link layer radio signal strength information in order to enhance the performance of mSCTP We also propose a mechanism for a mobile node to initiate the change of data delivery path based on link layer radio signal strength information. In addition, if it takes long time to acquire new data path, we propose an approach for reducing handover latency. The simulation results show that the performance of proposed transport layer mobility support mechanism is competitive compared to the traditional network layer mobility supporting approach. Especially, when the moving speed of mobile node is fast, it shows better performance than the traditional network layer approaches.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.5
• /
• pp.133-142
• /
• 2004

Recently, the growth of Internet and a variety of multimedia services through Internet increasingly demands high-speed packet transmission, the new routing function, and QoS guarantee on conventional routers. Thus, a new switching mechanical called the MPLS(Multi-Protocol Label Switching), was proposed by IETF(Internet Engineering Task Force) as a solution to meet these demands. In addition the deployment of MPLS network supporting Differentiated Services is required. In this paper, we propose the architecture of the MPLS switch supporting Differentiated Services in the MPLS-based network. The traffic conditioner consists of a classifier, a meter, and a marker. The VOQ-PHB module, which combines input Queue with each PHB queue, is implemented to utilize the resources efficiently. It employs the Priority-iSLIP scheduling algorithm to support high-speed switching. We have designed and verified the new and fast hardware architecture of VOQ-PHB and the traffic conditioner for QoS and high-speed switching using NS-2 simulator. In addition, the proposed architecture is modeled in VHDL, synthesized and verified by the VSS analyzer from SYNOPSYS. Finally, to justify the validity of the hardware architecture, the proposed architecture is placed and routed using Apollo tool.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2422-2429
• /
• 2013

WMN is considered as a core methodology to provide mobile wireless network service with multi-hop routing feature. It has a merit that can be easily deployed by utilization of protocols for MANET. However, it has differences in supporting multiple networks and channels, network architecture, and so on. Especially, in case of routing protocols, to apply them intactly to WMN can be a cause of low performance because of do not moving mesh routers. AODV seems like suitable for WMN among the various routing protocols for MANET. However, it has a defect in scalability. In this paper, an enhanced AODV routing method for WMN was proposed. The proposed method was designed to be suitable to the architecture of WMN by use of layering and localizing the broadcasting domain.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.11a
• /
• pp.371-374
• /
• 2004

Induction motors are a critical component of many industrial processes and are frequently integrated in commercially available equipment. Safety, reliability, efficiency, and performance are some of the major concerns of induction motor applications. Preventive maintenance of induction motors has been a topic great interest to industry because of their wide range application of industry. Since the use of mechanical sensors, such as vibration probes, strain gauges, and accelerometers is often impractical, the motor current signature analysis (MACA) techniques have gained murk popularity as diagnostic tool. Fault tolerant control (FTC) strives to make the system stable and retain acceptable performance under the system faults. All present FTC method can be classified into two groups. The first group is based on fault detection and diagnostics (FDD). The second group is independent of FDD and includes methods such as integrity control, reliable stabilization and simultaneous stabilization. This paper presents the fundamental FDD-based FTC methods, which are capable of on-line detection and diagnose of the induction motors. Therefore, our group has developed the embedded distributed fault tolerant and fault diagnosis system for industrial motor. This paper presents its architecture. These mechanisms are based on two 32-bit DSPs and each TMS320F2407 DSP module is checking stator current, voltage, temperatures, vibration and speed of the motor. The DSPs share information from each sensor or DSP through DPRAM with hardware implemented semaphore. And it communicates the motor status through field bus (CAN, RS485). From the designed system, we get primitive sensors data for the case of normal condition and two abnormal conditions of 3 phase induction motor control system is implemented. This paper is the first step to drive multi-motors with serial communication which can satisfy the real time operation using CAN protocol.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.4
• /
• pp.965-972
• /
• 2011

As an aged population has increased in Korea, the number of patients with chronic disease has soared up as well. The rapid increase of the chronic disease triggers a need of new paradigm of healthcare. In terms of data transmission of healthcare system, a use of data-transmission protocol based on bluetooth could be dismal in application of healthcare due to its postponement of connection. On the contrary, WPAN is evaluated to be proper to support the application of healthcare in restricted geographic areas. In addition, the bluetooth, a base of the current wireless network, doesn't support a special mechanism to cope up with emergent patients because of its delayed connection among devices. Against this backdrop, this study aims to design an integrated interface of multi bio-sensing and suggest a measuring and monitering system for the patients with chronic illnesses by using Zigbee of WPAN as a sufficient bandwidth is anticipated owing to frequent deliveries of complicated biological signals.

• Journal of KIISE:Information Networking
• /
• v.31 no.6
• /
• pp.659-672
• /
• 2004

A Mobile Ad hoc Network (MANET) is a group of independent mobile computing nodes that consist of a multi-hop wireless network without a central administration or any infrastructure. Every node that wants to join a MANET must obtain an address for communication. Having a centralized DHCP server that provides addresses to nodes, we can easily and automatically obtain addresses. However, a MANET lacks any fixed infrastructure such as a DHCP server. We therefore propose a distributed address autoconfiguration approach for a MANET using a reserved address and optimistic Duplicated Address Detection (DAD). The reserved address helps to reduce the allocation latency, and the optimistic DAD guarantees the uniqueness of addresses and lessens communication overhead. We then suggest methods of handling network partition and network merging situations, and go on to evaluate our approach through simulations. The simulation result shows that our scheme guarantees the uniqueness of allocated address and considerably improves allocation latency and communication overheads.

• Journal of the Korean Society for information Management
• /
• v.15 no.3
• /
• pp.151-173
• /
• 1998

National Union Catalog presupposes an information infrastructure which permits users to identify and locate materials of all the domestic libraries and to share materials among libraries. Recently, there have been developed national union catalog projects in many countries using Z39.50 protocol implementation. In Korea, multi-union catalogs based on the types of libraries, i.e., public, academic, and special libraries, have been constructed separately. The virtual national union catalog which is a decentralized electronically accessible catalog unified by linking the databases of several institutions using Z39.50 is preferable to a union catalog implemented by a single centralized database. In this paper, hybrid union catalog is suggested with mixtures of centralized union catalogs and Z39.50-based distributed search systems for the development of a national union catalog. It is also suggested that the roles of a national library and centers for union catalog, and relationships between two types of institution for making sound ground for implementing the virtual Korean union catalog.