• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.169-172
• /
• 2002

A vision sensor measure range data using laser light source. This sensor generally use patterned laser which shaped single line. But this vision sensor cannot satisfy new trend which feeds foster and more precise processing. The sensor's sampling rate increases as reduced image processing time. However, the sampling rate can not over 30fps, because a camera has mechanical sampling limit. If we use multi line laser pattern, we will measure multi range data in one image. In the case of using same sampling rate camera, number of 2D range data profile in one second is directly proportional to laser line's number. For example, the vision sensor using 5 laser lines can sample 150 profiles per second in best condition.

• Transactions of Materials Processing
• /
• v.15 no.1 s.82
• /
• pp.42-46
• /
• 2006

For mass production, usually injection mold has multi-cavity which is filled through geometrical balanced runner system. Despite geometrical balanced runner system, filling imbalances between cavity to cavity have always been observed. These filling imbalances are one of the most significant factors to affect quality of plastic parts. Filling imbalances are results from non-symmetrical shear rate distribution within melt when it flows through tile runner system. It has been possible to decrease filling imbalance by optimizing processing conditions, but it has not completely eliminated this phenomenon during injection molding processing. This paper presents a solution for these filling imbalances by using Runner Core pin (RC pin). The Runner Core pin which is developed in this study creates a symmetrical shear distribution within runner. As a result of using Runner Core pin, a remarkable improvement in reducing filling imbalances was confirmed.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.14 no.6
• /
• pp.339-346
• /
• 2019

Multi-axis servo systems are widely used in various fields such as industiral systems for improving production efficiency, robotics and complex systems where many mechanical devices and sensor systems are connected. Such a servo system requires that the servo control technique to realize the synchronization of the drive shaft in the steady state and transient conditions and to control so as to follow the target track in order to improve product precision and production efficiency. In addition, embedded type hardware is required for smooth control of the entire multi-axis system. Therefore, this paper uses hardware based on FPGA which is widely used in digital signal processing field and various control system because hardware design change is easy and parallel processing is possible. In addition, Labview based servo motor control program was studied that can control the servo motor by ensuring the performance and flexibility of the FPGA and follow the target trajectory according to various speed processing and accurate timing synchronization.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.259-260
• /
• 2011

Using modern techniques from scientific computing and numerical analysis, natural phenomena or scientific experiment can be simulated effectively with a computer and used for computer graphics, for example as special effects for the film industry, manufacturing the thin film, multi-phase simulation and image processing. The Level Set method can make those things happen without a lot of difficulties. This method was devised by Osher and Sethian(1988) to represent dynamically moving interfaces as the zero level set of a scalar function that evolves in time. Since then, many researchers have worked on many applications using a Level Set Method. I will give a talk about the applications of the Level Set Method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.584-587
• /
• 2002

A vision sensor measure range data using laser light source. This sensor generally use patterned laser which shaped single line. But this vision sensor cannot satisfy new trend which needs laster and more precise processing. The sensor's sampling rate increases as reduced image processing time. However, the sampling rate can not over 30fps, because a camera has mechanical sampling limit. If we use multi line laser pattern, we will measure multi range data in one image. In the case of using same sampling rate camera, number of 2D range data profile in one second is directly proportional to laser line's number. For example, the vision sensor using 5 laser lines can sample 150 profiles per second in best condition.

• Textile Coloration and Finishing
• /
• v.21 no.1
• /
• pp.53-58
• /
• 2009

A real-time inspection system has been developed by combining CCD based image processing algorithm and a standard lighting equipment. The system was tested for defective fabrics showing nozzle contact scratch marks, which were one of the frequently occurring defects. Multi-resolution analysis(MRA) algorithm were used and evaluated according to both their processing time and detection rate. Standard value for defective inspection was the mean of the non-defect image feature. Similarity was decided via comparing standard value with sample image feature value. Totally, we achieved defective inspection accuracy above 95%.

• Annual Conference of KIPS
• /
• 2014.11a
• /
• pp.1183-1186
• /
• 2014

Our research is different form traditional to have some large LED screen grouping together to constitute multi-vision technique. In this paper, we purpose a method of using k-path diffusion method to build connect between the devices and find an optimal data transmission path. In second half of this paper, through practical application, we using this technique transmitting data successfully and achieving a simple Multi-vision effect. This technique possess smart devices and Wifi P2P's features, these features improve system's dynamic and decentralized processing ability make our technique has high scalability.

• Transactions of Materials Processing
• /
• v.13 no.7
• /
• pp.580-585
• /
• 2004

Almost all injection molds have multi-cavity runner system fur productivity and are designed with geometrically balanced runner system in order to minimize filling imbalance between cavity to cavity during processing. However, filling imbalances have been observed though geometrically balanced runner lay-out. Generally, these filling imbalances are due to thermal unbalance, viscosity, characteristic of polymers and so on. These kinds of filling imbalances have already been reported by Beaumont since 1997, but his research has mainly focused on filling imbalance at binary runner. In this study, we conducted an experimental study about the filling imbalances in unary branch runner as well as binary branch runner and inquired into the causes of filling imbalances. The results could be summarized as fellowing: Filling imbalances existed in multi-cavity mold with unary branch runner, it could be decreased by optimizing processing condition such as increasing injection rate, and it is almost proportion to each polymer's temperature sensibility.

• Journal of Multimedia Information System
• /
• v.9 no.3
• /
• pp.183-190
• /
• 2022

Image-based 3D object detection is one of the important and difficult problems in autonomous driving and robotics, and aims to find and represent the location, dimension and orientation of the object of interest. It generates three dimensional (3D) bounding boxes with only 2D images obtained from cameras, so there is no need for devices that provide accurate depth information such as LiDAR or Radar. Image-based methods can be divided into three main categories: monocular, stereo, and multi-view 3D object detection. In this paper, we investigate the recent state-of-the-art models of the above three categories. In the multi-view 3D object detection, which appeared together with the release of the new benchmark datasets, NuScenes and Waymo, we discuss the differences from the existing monocular and stereo methods. Also, we analyze their performance and discuss the advantages and disadvantages of them. Finally, we conclude the remaining challenges and a future direction in this field.

• The Journal of Fisheries Business Administration
• /
• v.52 no.4
• /
• pp.45-63
• /
• 2021

The purpose of this study is to analyze the structure, status and economic ripple effects of the fisheries processing industry in Korea using interindustry analysis. Five input-output tables published over the past twenty years have been reclassified with a focus on the fisheries processing sector. Through these multi-period tables, we analyzed changes in the inducing effects in production, value added and employment as well as the backward-forward linkage effects. As a result of the analysis, it was found that the industrial scale of the fisheries processing industry is very small compared to other food manufacturing industries. The backward linkage effect of the fisheries processing industry was greater than that of other industries, but the forward linkage effect was rather low. This means that the fisheries processing industry can be greatly affected by industrial depression of the downstream industries such as fishery and aquaculture. Production and employment-inducing effects of the fisheries processing industry have shown a decreasing trend in recent years. This reflects the reality that intermediate inputs are gradually being replaced by imports from domestic production due to the expansion of market opening and the depletion of fishery resource. In the future, it is necessary to prepare a strategy to increase the value-added productivity of the fisheries processing sector and foster it as an export industry.