• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.2_2
• /
• pp.289-299
• /
• 2020

The composition of convergence cross-section of the material is a technique that provides reasonable design and construction of structures. It is frequently used in medium-sized bridges and architectural structures. However, the structural behavioral spare capacity enhancement of the structure by the application of the convergence cross-section is still limited by the expandability due to the limiting state of each material. In order to overcome these limitations, this study reasonably analyzed the construction stages before and after the convergence cross-section constructed and developed a technique for forming multi-point boundary conditions using struts, which are compression members. Based on the existing cases, a reasonable construction step for forming the material composite section of the entire structural system of the structure was derived, and a numerical analysis model for a specific part was constructed to analyze the behavior of the strut application. As a result of this study, the effect of reducing the sectional force of 7.40% in beam-column joint and 6.31% in the center of girder was derived, and the deflection, which is a measure of the serviceability of the structure, improved by 54.41% from the installation and dismantling of strut members at each construction stage.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.448-450
• /
• 2005

A ubiquitous network allows all users to access and exchange information of any kind freely at any time, from anywhere, and from any appliance through the use of broadband and mobile access. Bluetooth commincation can provide the missing wireless extension to the heterogeneous network, allowing a more ubiquitous access. In this point of view, the BT specifications define ways for which each BT device can set up multiple connections with neighboring devices to communicate in a multi-hop fashion. this paper provides insights on the Bluetooth technology and on some limitations of the scatternet formations. so that, we describe a new multi-hop routing protocol for the establishment of scatternets. this protocol defines rules for forming a multi-hop topology in two phases. the first phase, topology discovery, concerns the discovery of the node's depth from a root node initiating inquiry process. the second phase forms scatternet topology based on the result of topology discovery.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.6
• /
• pp.847-851
• /
• 2010

It was attempted to develop an auto part by over molding injection mold that produces precision products in high productivity with use of an eco-friendly TPE substitute material for NBR. NBR is currently used in motor gear cover, one of the key parts in motor module for auto doors. Gear cover is composed of plastics and rubber mostly today, which requires a two (2) step process for production using two presses of different types. A hot press is used at this time for forming the rubber, which has drawback of requiring a rather long forming time of 400 seconds for one forming process. Even though this difficulty is overcome by reducing production time through employment of multi-cavity molds, time for forming process must be shortened for improvement of the productivity eventually, and the existing method of insert injection for products that have been formed with plastic material must be outgrown. In this point of view, over molding injection using TPE has a big advantage. Forming time is shortened to 54 seconds, and working the two (2) processes in series by one (1) press could solve the durability problem caused by deflection of the plastics, not to mention shortening the process time. Enhancement of productivity by almost 80% and improvement in the accuracy of the product could thus be achieved.

• Journal of Korea Multimedia Society
• /
• v.8 no.7
• /
• pp.1012-1021
• /
• 2005

This paper describes the design and implementation of an efficient multi-point multimedia conference system using IP grouping. Existing multi-point multimedia conference systems are difficult for multi-user to perform efficient cooperation due to bandwidth limitation for data transmission of video, audio and documentation. In the case that multi-user uses limited bandwidth, smooth cooperation does not accomplish due to transmission delay for the real-time transmission of image and speech data. A hybrid transfer method which is mixed with distributed and centralized methods is used for smooth cooperation, and the network bandwidth is reduced by forming multi-user conference systems of IP grouping in this paper. Also, adaptive image frame variations are used to solve bottleneck effect according to the number of users. An efficient multi-user conference system is designed to support audio quality.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.2
• /
• pp.35.2-35.2
• /
• 2018

Using the K-band Multi-object Spectrograph (KMOS) at the Very Large Telescope (VLT), the KMOS Redshift One Spectroscopic Survey (KROSS) has gathered integral-field data for ~800 star-forming galaxies at a redshift z~1, when the universe was roughly half its current age and forming the bulk of its stars. With spatially-resolved observations, KROSS reveals galaxies that are both gas-rich and highly turbulent. It is possible to derive the observed and baryonic Tully-Fisher (luminosity - rotation velocity) relations, thus constraining the mass-to-light ratios and total (luminous + dark) masses of the galaxies. This in turn highlights the dependence of the relation zero-point on the degree of rotational support of the galaxies (rotational velocity to velocity dispersion ratio). By degrading and analogously analysing integral-field data of hundreds of local galaxies from the Sydney-AAO Multi-object Integral-field Spectrograph (SAMI) survey, a robust comparison z=0 Tully-Fisher relation can also be derived, thus further constraining the luminous and dark mass growth of disk galaxies over the last 7 billions years. This unique comparison also reveals that systematic effects associated with sample selection and analysis methods are as large as the effects expected from cosmological evolution, and thus that most other comparisons employing heterogeneous data and/or methods can safely be ignored.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.2
• /
• pp.182-190
• /
• 2009

GPS receivers can be disrupted by intentional or unintentional jamming, then it is unable to receive GPS signals and it is impossible to get the correct navigation results. Anti-jamming schemes using array antennas are being studied well due to high performance of those, and the efforts to apply them to GPS receiver are also being done. A GPS receiver structure for a multiple beam-forming scheme among those schemes has been proposed in this paper, and the performance is also compared with that using a general GPS receiver structure. For a general GPS receiver structure, each satellite signal which is formed by a beam-forming scheme is summed to be processed in a part of digital signal processing. For a proposed GPS receiver structure, however, each satellite signal is respectively processed by a designated channel in a part of digital signal processing. Finally, it is confirmed that the proposed GPS receiver structure is superior to a general GPS receiver structure in a point of the carrier to noise power ratio and the navigation accuracy using a software platform.

• Journal of the Korean Burn Society
• /
• v.22 no.2
• /
• pp.58-65
• /
• 2019

Wound caused by high-tension electrical burns is difficult to manage because the wound is deep and complex. The wound is progressively necrotic due to microvascular injury resulting in deep tissue exposure. So, coverage of the wound at the entry point and the exit point is cumbersome, often requiring flap coverage. We experienced a case of one patient for peroneal artery perforator free flap coverage on the palm of the right hand of the entry point of electrical burn. The left foot wound of electrical exit point was covered by full thickness skin graft. Also a small wound was on the left side of the lower back was the exit point of electrical burn. The lower back wound was healed and recurred repeatedly after burn. On postburn day 6 month, through the radiologic exam, metal shadow was identified in the left gluteus muscle forming chronic sinus. We explored the wound of sinus and a foreign body was identified in the sac as multi braid wires thin as hair. According to the patient's past history, we suspected that the back wound was caused by electrical burn injury through the wires.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.2
• /
• pp.146-153
• /
• 1998

NC machines with 4 or 5 axes are capable of various tool approach motions, which makes interference-free and high machinablity machining possible. This paper deals with how to integrate these two advantages (interference-free and high machinability machining) in multi-axes NC machining with a ball-end mill. Feasible tool approach region at a point on a surface is first computed, then among which an approach direction is determined so as to minimize the cutting force required. Tool and spindle volumes are considered in computing the feasible tool approach region, and the computing time is improved by trans-forming surface patches into minimal enclosing spheres. A cutting force prediction model is used for estimating the cutting force. The algorithm is developed so as to be applied to 4- or 5-axes NC machining in common.

• Journal of KIISE:Software and Applications
• /
• v.37 no.5
• /
• pp.386-393
• /
• 2010

A defect in an image is a set of pixels forming an irregular shape. Since a defect, in most cases, is not easy to be modeled mathematically, the defect detection problem still resides in a research area. If a given image, however, composed by certain patterns, a defect can be detected by the fact that a non-defect area should be explained by another patch in terms of a rotation, translation, and noise. In this paper, therefore, the defect detection method for a repeated multi-patterned image is proposed. The proposed defect detection method is composed of three steps. First step is the interest point detection step, second step is the selection step of a appropriate patch size, and the last step is the decision step. The proposed method is illustrated using SEM images of semiconductor wafer samples.

• Korean Journal of Computational Design and Engineering
• /
• v.4 no.3
• /
• pp.173-179
• /
• 1999

In reverse engineering, when a shape containing multi-patched surfaces is digitized, the boundaries of these surfaces should be detected. The objective of this paper is to introduce a computationally efficient segmentation technique for extracting edges, ad partitioning the 3D measuring point data based on the location of the boundaries. The procedure begins with the identification of the edge points. An automatic edge-based approach is developed on the basis of local geometry. A parametric quadric surface approximation method is used to estimate the local surface curvature properties. the least-square approximation scheme minimizes the sum of the squares of the actual euclidean distance between the neighborhood data points and the parametric quadric surface. The surface curvatures and the principal directions are computed from the locally approximated surfaces. Edge points are identified as the curvature extremes, and zero-crossing, which are found from the estimated surface curvatures. After edge points are identified, edge-neighborhood chain-coding algorithm is used for forming boundary curves. The original point set is then broke down into subsets, which meet along the boundaries, by scan line algorithm. All point data are applied to each boundary loops to partition the points to different regions. Experimental results are presented to verify the developed method.