• International Journal of Aeronautical and Space Sciences
• /
• 제15권2호
• /
• pp.113-122
• /
• 2014

The objective of the paper is to clarify a methodology based on the use of the existing component mode synthesis methods for the case of two damped substructures which are coupled through a linking viscoelastic flexible substructure and for which the structural modes with free geometrical interface are used for each main substructure. The proposed methodology corresponds to a convenient alternative to the direct use either of the Craig-Bampton method applied to the three substructures (using the fixed geometric interface modes) or of the flexibility residual approaches initiated by MacNeal (using the free geometric interface modes). In opposite to a geometrical interface which is a topological interface on which there is a direct linkage between the degrees of freedom of substructures, we consider a physical flexible interface which exists in certain present technologies and for which the general framework linear viscoelasticity is used and yields a frequency-dependent damping and stiffness matrices of the physical flexible interface.

• 한국CDE학회논문집
• /
• 제4권2호
• /
• pp.100-109
• /
• 1999

The bearing design includes the steps of selection bering type, selection bearing subtype, and determining the peripheral equipments. In this paper decision making methodologies are compared to propose a stepwise decision methodology to the bearing selection problem. An artificial neural network trained with design cases is used for selecting a bearing type in the first step. Then the subtype of the bearing is selected using the weighting method, high is a kind of multi-criteria decision making method. Finally, the types of peripheral equipments such as lubrication devices, seals and bearing housings are determined using a rule-based expert system.

• 한국정밀공학회지
• /
• 제15권4호
• /
• pp.118-124
• /
• 1998

The die wear is one of the main factors affecting die accuracy and tool lifetime. It is desired to reduce die wear by developing simulation method to predict wear based on process variables, and then optimizing the process. Therefore, this paper describes methodology of preform design for minimizing wear of finisher die in multi-stage cold forging processes. The finite element method is combined with the routine of wear prediction. The cold forging process is analyzed using developed simulation method. In order to obtain preform to minimize die wear, the Flexible Polyhedron Search(FPS) algorithm is used. The optimal preform shape is found from iterative deformation analysis and wear calculation.

• Journal of Construction Engineering and Project Management
• /
• 제1권2호
• /
• pp.1-10
• /
• 2011

Bridges are critical and valuable components in any road and rail transportation network. Therefore bridge remediation has always been a top priority for asset managers and engineers, but identifying the nature of true defect deterioration and associated remediation treatments remains a complex task. Nowadays Decision Support Systems (DSS) are widely used to assist decision makers across an extensive spectrum of unstructured decision environments. The main objective of this research is to develop a requirements-driven methodology for bridge monitoring and maintenance which has the ability to assess the bridge condition and find the best remediation treatments using Simple Multi Attribute Rating Technique (SMART); with the aim of maintaining a bridge within acceptable limits of safety, serviceability and sustainability.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.646-653
• /
• 2001

LQG/LTR Control Methology is recently used for the analysis of multi-variable control in frequency domain. Target filter loop is designed by the demanding requirements such as cross-over frequency, disturbance rejection in low frequency domain, zero steady-state error, identification of maximum and minimum singular values and sensor noise rejection in high frequency domain. Loop transfer recovery is accomplished by solving the cheap control and then simulation close to the target filter loop. In this study, LQG/LTR Control Methodology is applied to the seat suspension system. It is found that this technique is very effective to control the system and improve the ride quality of human body.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.325.2-325
• /
• 2002

A new methodology is presented for the multi-degree-of-freedom vibration absorber for an elastically suspended rigid body with the planes of symmetry in general motion. Unlike the common single degree-of-freedom vibration absorber, the presented methodology makes use of both linear and rotational properties of the absorber. It is suggested that an absorber is designed separately for the in-plane and out-of-plane axes of vibration and combined the two cases for a six-degree-of-freedom absorber. (omitted)

• 한국안전학회지
• /
• 제26권2호
• /
• pp.20-25
• /
• 2011

The fire event occurred in fire proof zone often causes serious electrical problems such as shorts, ground faults, or open circuits in nuclear power plants. These would be directed to the loss of safe shutdown capabilities performed by safety related systems and equipments. The fire event can treat the basic design principle that safety systems should keep their functions with redundancy and independency. In case of a multi-core cable fire, operators can not perform their mission properly and can misjudge the situation because of spurious operation, wrong indication or instrument. These would deteriorate the plant capabilities of safety shutdown and make disastrous conditions. In this paper, the characteristic of cable fire is investigated and the heat-flux evaluation for cable fire is studied. Moreover, a diagnostic methodology for degraded cable in nuclear power plants is presented.

• 성인간호학회지
• /
• 제22권2호
• /
• pp.130-142
• /
• 2010

Purpose: The purpose of this study was to analyze attitude toward dignified dying of Korean students majoring in human service area. Methods: The Q-methodology which provides a method of analyzing the subjectivity of each item was used. The 34 selected Q-statements from each of 38 subjects were classified into a shape of normal distribution using a 9 point scale. The collected data was analyzed using a QUANL PC program. Results: Four types of attitude toward dignified dying from the subjects were identified. Type I is an expression type for happy emotion, Type II is a dislike type for life prolongation, Type III is a pursuit type for relationship improvement, and Type IV is a perception type for family presence. Conclusion: The results of the study indicate that integrating multi-disciplinary curriculum development related to dignified dying and death education for students majoring in human service area are needed.

• Asian Journal of Business Environment
• /
• 제4권3호
• /
• pp.27-37
• /
• 2014

Purpose - In the past, designs for traditional products have usually focused on historic techniques. However, this tradition of using historic techniques has now been replaced by the trend of using the innovative design concept. Research design, data, and methodology - To measure future market trends and quality requirements, we apply the results of the questionnaires and analyze them with various experimental processes and a design methodology. In this way, we gauge the impact of the innovative product value chain on the promotion of new products. Results - Accompanied with an innovative product value chain, the product can stimulate the development of enterprise management, which has become the main issue in social and economic development in every developed country, and can facilitate the progress of enterprise management throughout the enterprise. Conclusions - Customer demand should be emphasized as the primary means to solve design problems, to design optimal solutions, to create differentiation with competitors, and to pursue optimal marketing strategies.

• 한국국방경영분석학회지
• /
• 제24권2호
• /
• pp.30-42
• /
• 1998

The problems of evaluating Telecommunication Management Network Operation Systems (TMNOS) are Multi-Criteria Decision Making (MCDM) problems. A method for evaluating the TMNOS has not yet been clearly defined. A study of an effective and efficient management methodology for TMNOS, which are heterogeneous and complex, is needed. The components of TMNOS have attributes of dependence between considered criteria or alternatives. This type of dependence impact between criteria or alternatives is a network structure. We suggest a methodology of Analytic Delphi Network Process (ADNP) for evaluating TMONS. The TMNOS problem of Korea Telecom (KT) is suggested as a case study of the ADNP.