• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.10A
• /
• pp.956-963
• /
• 2008

In a multi-hop wireless ad hoc network broadcasting is an elementary operation to support route discovery, address resolution and other application tasks. Broadcasting by flooding may cause serious redundancy, contention, and collision in the network which is referred to as the broadcast storm problem. Many broadcasting schemes have been proposed to give better performance than simple flooding in wireless ad hoc network. How to decide whether re-broadcast or not also poses a dilemma between reachability and efficiency under different host densities. In this paper, we propose enhanced broadcasting schemes, which can reduce re-broadcast packets without loss of reachability. Simulation results show that proposed schemes can offer better reachability as well as efficiency as compared to other previous schemes.

• Journal of Korea Multimedia Society
• /
• v.12 no.12
• /
• pp.1778-1786
• /
• 2009

Many sensor network applications have been developed for smart home, disaster management, and a wide range of other applications. These applications, however, generally assume a fixed base station as well as fixed sensor nodes. Previous research on sensor networks mainly focused on efficient transmission of data from sensors to fixed sink nodes. Recently there has been active research on mobile sink nodes, sink mobility is one of the most comprehensive trends for information gathering in sensor networks, but the research of an environment where both fixed sink nodes and mobile sinks are present at the same time is rather scarce. This paper proposes a scheme for context-aware by ubiquitous devices with the sink functionality added through fixed sinks under a previously-built, cluster-based multi-hop sensor network environment. To this end, clustering of mobile devices were done based on the fixed sinks of a previously-built sensor network, and by using appropriate fixed sinks, context gathering was made possible. By mathematical comparison with TTDD routing protocol, which was proposed for mobile sinks, it was confirmed that performance increases by average 50% in energy with the number of mobile sinks, and with the number of movements by mobile devices.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.844-847
• /
• 2011

Wireless mesh network (WMN) is a type of mobile ad-hoc network consists of wireless router, mobile clients and gateway which connects the network with the Internet. To provide security in the network it is required to encrypt the message sent among the communicating nodes in such way so that only legitimate user can retrieve the original data. Several security mechanisms have been proposed so far to enhance the security of WMN. However, there still exists a need for a comprehensive mechanism to prevent attacks in data communication. Considering the characteristic of mesh network, in this paper we proposed a public key cryptography based security architecture to establish a secure key agreement among communicating nodes in mesh network. The proposed security architecture consists of two major sections: client data protection and network data protection. Client data protection deals with the mutual authentication between the client and the access router and provide client to access router encryption for data confidentiality using standard IEEE 802.11i protocol. On the other hand, network data protection ensures encrypted routing and data transfer in the multi hop backbone network. For the network data protection, we used the pre-distributed public key to form a secure backbone infrastructure.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.11
• /
• pp.105-111
• /
• 2009

The study aims to propose the intelligent clustering technique that calculates the distance by improving the problems of multi-hop clustering technique for inter-vehicular secure communications. After calculating the distance between vehicles with no connection for rapid transit and clustering it, the connection between nodes is created through a set distance vale. Header is selected by the distance value between nodes that become the identical members, and the information within a group is transmitted to the member nodes. After selecting the header, when the header is separated due to its mobility, the urgent situation may occur. At this time, the information transfer is prepared to select the new cluster header and transmit it through using the intelligent cluster provided from node by the execution of programs included in packet. The study proposes the cluster technique of the intelligent distance estimation for the mobile Ad-hoc network that calculates the cluster with the Store-Compute-Forward method that adds computing ability to the existing Store-and-Forward routing scheme. The cluster technique of intelligent distance estimation for the mobile Ad-hoc network suggested in the study is the active and intelligent multi-hop cluster routing protocol to make secure communications.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.4
• /
• pp.77-85
• /
• 2015

Recently, wireless sensor network(WSN) have been used in various fields to implement ubiquitous computing environment. WSN uses small, low cost and low power sensors in order to collect information from the sensor field. This paper proposes a clustering algorithm for energy efficiency of sensor nodes. The proposed algorithm is based on conventional LEACH, the representative clustering protocol for WSN and it prolongs network and nodes life time using sleep technique and changable transmission mode. The nodes of the proposed algorithm first calculate their clustering participation value based on the distance to the neighbor nodes. The nodes located in high density area will have clustering participation value and it can turn to sleep mode. Besides, proposed algorithm can change transmission method from conventional single-hop transmission to multi-hop transmission according to the energy level of cluster head. Simulation results show that the proposed clustering algorithm outperforms conventional LEACH, especially non-uniformly deployed network.

• The KIPS Transactions:PartC
• /
• v.15C no.6
• /
• pp.539-546
• /
• 2008

In this paper, we propose an address autoconfiguration mechanism and a route establishment mechanism appropriate for the modified MANET architecture which overcomes the multi-link subnet problem. For the delivery of Router Advertisement (RA) messages without causing the duplicate packet reception problem in the multi-hop wireless network environment, the Scope-Extended RA (Scope-Extended Router Advertisement) message is defined. Also, by defining the MANET Prefix option, a MANET node is allowed to send packets destined to a host not in the MANET directly to the gateway. This can prevent the performance degradation caused by broadcasting control messages of the reactive routing protocol for route establishment. The performance of the proposed mechanism is analyzed through NS-2 based simulations and, according to the simulation results, it is shown that the proposed mechanism performs well in terms of the control message overhead.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.34-41
• /
• 2017

Wireless mesh networks contain multi-hop routing protocols between wireless nodes and are connected to the Internet through a gateway. These networks perform a role as a backbone and are scalable for main applications. We propose the design of QoS supporting mechanisms for wireless mesh networks using software defined networking. Our proposed scheme is cost-effective and features adaptive QoS mechanisms for wireless router's resource constraints. The QoS mechanisms use software defined networking technology with Openflow protocol based on diffserv and intserv models with MPLS mechanism and RSVP respectively. A performance evaluation model is suggested to verify the validity of the proposed scheme using several QoSmetrics of the wireless mesh networks.

• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.3
• /
• pp.141-152
• /
• 2007

In this paper, we present a network-oriented lightweight real-time system, which is composed of an event-driven operating system called the Embedded Lightweight Operating System (ELOS) and a generic multi hop ad hoc routing protocol suite. In the ELOS, a conditional preemptive FCFS scheduling method with a guaranteed time slot is designed for efficient real-time processing. For more elaborate configurations, we reinforce fault tolerance by supplementing semi-auto configuration using wireless agent nodes. The developed hardware platform is also introduced, which is a scalable prototype constructed using off-the-shelf components. In addition, in order to evaluate the performance of the proposed system, we developed a ubiquitous network test-bed on which several experiments with respect to various environments are conducted. The results show that the ELOS is considerably favorable for tiny ubiquitous networked systems with real-time constraints.

• Journal of Sensor Science and Technology
• /
• v.20 no.2
• /
• pp.137-144
• /
• 2011

Wireless sensor network(WSN) has the potential to greatly effect many aspects of u-healthcare. By outfitting the potential with WSN, wearable sensor node can collects real-time data on physiological status and transmits through base station to server PC. However, there is a significant gap between WSN and healthcare. WSN has the limited resource about computing capability and data transmission according to bio-sensor sampling rates and channels to apply healthcare system. If a wearable node transmits ECG and accelerometer data of 4 channel sampled at 100 Hz, these data may occur high loss packets for transmitting human activity and ECG to server PC. Therefore current wearable sensor nodes have to solve above mentioned problems to be suited for u-healthcare system. Most WSN based activity and ECG monitoring system have been implemented some algorithms which are applied for signal vector magnitude(SVM) algorithm and ECG noise algorithm in server PC. In this paper, A wearable sensor node using integrated ECG and 3-axial accelerometer based on wireless sensor network is designed and developed. It can form multi-hop network with relay nodes to extend network range in WSN. Our wearable nodes can transmit 1-channel activity data processed activity classification data vector using SVM algorithm to 3-channel accelerometer data. ECG signals are contaminated with high frequency noise such as power line interference and muscle artifact. Our wearable sensor nodes can remove high frequency noise to clear original ECG signal for healthcare monitoring.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.1
• /
• pp.64-72
• /
• 2009

Previous research on sensor networks mainly focused on efficient transmission of data from sensors to fixed sink nodes. Recently there has been active research on mobile sink nodes, but the re-search of an environment where both fixed sink nodes and mobile sinks are present at the same time is rather scarce. This paper proposes a technique for context gathering by mobile devices with the sink functionality added through fixed sinks under a previously built, cluster based multi hop sensor network environment. To this end, clustering of mobile devices were done based on the fixed sinks of a previously built sensor network, and by using appropriate fixed sinks, context gathering was made possible. By mathematical comparison with TTDD routing protocol, which was proposed for mobile sinks, it was conformed that performance increases in energy with the number of mobile sinks, and with the number of movements by mobile devices.