• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.4
• /
• pp.118-129
• /
• 2008

This paper describes an IEEE 802.15.4-based hierarchical sensor network model for a VAWS(Vehicle Approach Warning System) which provides the drivers of vehicles approaching a sharp turn with the information about vehicles approaching the same turn from the opposite end. In the proposed network model, a tree-structured topology, that can prolong the lifetime of network is formed in a self-organizing manner by a topology control protocol. A simple but efficient routing protocol, that creates and maintains routing tables based on the network topology organized by the topology control protocol, transports data packets generated from the sensor nodes to the base station which then forwards it to a display processor. These protocols are designed as a network layer extension to the IEEE 802.15.4 MAC. In the simulation, which models a scenario with a sharp turn, it is shown that the proposed network model achieves a high-level performance in terms of both energy efficiency and throughput simultaneously.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.4
• /
• pp.87-97
• /
• 2009

A Mobile Ad hoc Network (MANET) is characterized by multi-hop wireless connectivity, frequently changing network topology with mobile nodes and the efficiency of the dynamic routing protocol plays an important role in the performance of the network. In this paper, the performance of five routing protocols for MANET is compared by using OPNET modeler: AODV, DSR, GRP, OLSR and TORA. The various performance metrics are examined, such as packet delivery ratio, end-to-end delay and routing overhead with varying data traffic, number of nodes and mobility. In our simulation results, OLSR shows the best performance in terms of data delivery ratio in static networks, while AODV has the best performance in mobile networks with moderate data traffic. When comparing proactive protocols (OLSR, GRP) and reactive protocols (AODV, DSR) with varying data traffic in the static networks, proactive protocols consistently presents almost constant overhead while the reactive protocols show a sharp increase to some extent. When comparing each of proactive protocols in static and mobile networks, OLSR is better than GRP in the delivery ratio while overhead is more. As for reactive protocols, DSR outperforms AODV under the moderate data traffic in static networks because it exploits caching aggressively and maintains multiple routes per destination. However, this advantage turns into disadvantage in high mobility networks since the chance of the cached routes becoming stale increases.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.259-266
• /
• 2013

Since the wireless communications have a limited transmission, the devices just around a master node can exchange data. Though Bluetooth and Zigbee support ad hoc, they are not appropriate for real-time voice communications. In this paper, we present a TDMA-based relay protocol for several users to communicate simultaneously. The proposed protocol can relay data or voice to other nodes in real-time by the multi-hop transmission method using TDMA. And the proposed protocol improves the network performance by allocating different frequencies to the slaves depending on the routing path scheduled by the routing table. NS-2 simulation shows that the performance of the proposed protocol is good in terms of the transmission delay and pecket loss probability in the real-time voice transmission.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.3
• /
• pp.879-884
• /
• 2024

Wireless sensor network technology is becoming increasingly important with the advancement of the Fourth Industrial Revolution. Consequently, various protocols such as LEACH, PEGASIS, and EEACP have been developed in an attempt to increase energy efficiency. However, the EEACP protocol still has room for improvement in terms of energy consumption during transmission. Particularly, inefficient paths associated with data reception settings may compromise the network's survivability. The proposed A-EEACP protocol optimizes data transmission direction around the sink node to reduce energy consumption and enhance the network's survivability.

• Journal of information and communication convergence engineering
• /
• v.20 no.1
• /
• pp.22-30
• /
• 2022

The reinforcement learning algorithm has proven its potential in solving sequential decision-making problems under uncertainties, such as finding paths to route data packets in wireless sensor networks. With reinforcement learning, the computation of the optimum path requires careful definition of the so-called reward function, which is defined as a linear function that aggregates multiple objective functions into a single objective to compute a numerical value (reward) to be maximized. In a typical defined linear reward function, the multiple objectives to be optimized are integrated in the form of a weighted sum with fixed weighting factors for all learning agents. This study proposes a reinforcement learning -based routing protocol for wireless sensor network, where different learning agents prioritize different objective goals by assigning weighting factors to the aggregated objectives of the reward function. We assign appropriate weighting factors to the objectives in the reward function of a sensor node according to its hop-count distance to the sink node. We expect this approach to enhance the effectiveness of multi-objective reinforcement learning for wireless sensor networks with a balanced trade-off among competing parameters. Furthermore, we propose SDN (Software Defined Networks) architecture with multiple controllers for constant network monitoring to allow learning agents to adapt according to the dynamics of the network conditions. Simulation results show that our proposed scheme enhances the performance of wireless sensor network under varied conditions, such as the node density and traffic intensity, with a good trade-off among competing performance metrics.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.1
• /
• pp.181-199
• /
• 2000

In this paper, we implemented and tested MPOA(MutiProtocol Over ATM) standardized in ATM Forum, which provides service for various layer 3 protocols as well as legacy LAN applications over ATM networks. The functions of MPCs(MPOA Clients) and MPSs(MPOA Servers) which are the components in MPOA systems are implemented. MPCs are located at the edge device and MPOA hosts and MPSs exist in routers. The implemented MPCs have the functions such as exchances of primitives between an LEC(LAN Emulation Client) and an MPC, management and maintenance of Egress/Ingress cache, default transmission through LECs and shortcut transmission. Assuming that routing, convergence and NHRP(Next Hop Resolution Protocol) functions exist in routers, the implemented MPSs have the functions such as exchanges of primitives between an LEC and an MPC, conversion and exchanges of frames between MPOA and NHRP, and management and maintenance of Egress/Ingress cache. All of the possible scenarios are made up to test whether they run correctly. The implemented system is tested by simulation according to the scenarios.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1B
• /
• pp.16-23
• /
• 2009

This paper investigates how many optimal routes can be established in terms of a given wireless mesh routing metric. Although many of routing metrics have been devised to precisely derive the wireless link quality in mesh, most (if not all) metrics have not been evaluated their optimality along with routing protocols. We consider stateof-the-art routing metrics and a widely accepted routing protocol in order to observe the optimality of established routes varying the number of source nodes. Also, we propose a unidirectional routing to deal with possible link asymmetry feature in wireless links. Through comparative simulation evaluations, we show that the portion of optimally established routes becomes less as the network traffic load increases, regardless of employed metrics, network topologies, and routing protocols.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4A
• /
• pp.369-379
• /
• 2011

During the routing process between nodes on the CR(Cognitive Radio) network conducting for efficient use of limited frequency resources, spectrum handover process due to the appearance of the PU occupies most of the routing latency, and also decreases the reliability of the path. In this paper, a cooperative routing protocol in a multi-channel environment is proposed. The source node broadcasts a message with available channel lists and probability of PU appearance during its route guidance. The intermediate nodes re-transmit the message, received from the source node, and update and maintain the information, status table of the path. The destination node determines the optimal path and sends a reply message to the selected path after it receives the messages from the intermediate nodes. The average probability of the PU appearance and the average time of the PU appearance are updated while transferring data. During data transmission the channel with the lowest probability of appearance of the PU is selected dynamically and if a PU appears on the current channel partial repairment is performed. It is examined that reliability of the selected path considerably is improved and the routing cost is reduced significantly compared to traditional routing methods.

• Convergence Security Journal
• /
• v.8 no.1
• /
• pp.9-18
• /
• 2008

This paper propose CAR-TO-CAR protocol which can prevent the cars at high-speed from a multiple clash accident at highway with exchanging information. we construct cluster be linked with distance took from GPS(Global Positioning System) because there is no connection at cars on the road. The proposed method solved the overload problem by establishing route because construct the cluster at the IEEE 802.11 MAC class. 'Multi-hop Routing protocol' based on Active Network enable stable Network to be formed by using Active Network.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2422-2429
• /
• 2013

WMN is considered as a core methodology to provide mobile wireless network service with multi-hop routing feature. It has a merit that can be easily deployed by utilization of protocols for MANET. However, it has differences in supporting multiple networks and channels, network architecture, and so on. Especially, in case of routing protocols, to apply them intactly to WMN can be a cause of low performance because of do not moving mesh routers. AODV seems like suitable for WMN among the various routing protocols for MANET. However, it has a defect in scalability. In this paper, an enhanced AODV routing method for WMN was proposed. The proposed method was designed to be suitable to the architecture of WMN by use of layering and localizing the broadcasting domain.