• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.10
• /
• pp.977-985
• /
• 2012

Recently, many countries have been developing new protocols to improve the performance of tactical ad hoc networks for implementing NCW (Network Centric Warfare). Combat net radio (CNR) networks are the most important communication infra for the ground forces such as infantry of Army. U.S. Army had developed MIL-STD-188-220D that is the Interoperability Standard for DMTDs (Digital Messages Transfer Device Subsystems) for voice and data communication in CNR. MIL-STD-188-220D is a candidate for MAC protocol of TMMR which is next radio and has a few constraints to used in TMMR. NAD (Network Access Delay) defined in MIL-STD-188-220D needs time synchronization to avoid collision. However, it is difficult for time synchronization to fit in multi-hop environment. We suggest the enhanced DAP (Deterministic Adaptable Priority)-NAD to prevent conflicts and decrease delays in multi-hop CNR. Simulation results show that the proposed scheme improves the performance in multi-hop CNR networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.3A
• /
• pp.229-234
• /
• 2009

In this paper, we propose a decision scheme of amount of required resources in wireless multi-hop systems which can reuse radio resources adaptively among relay stations (RSs). Base stations (BSs) can allocate resources dynamically based on amount of required resources of each RS. Moreover using resource reuse with this allocation method can increase amount of available resources in multi-hop systems. Generally, BSs allocate same amount of resources for RSs which share and reuses same resources for each other. Since amount of required resources are different among these RSs, a decision scheme of a specific value which can represent various required resources of RSs is needed. We propose this scheme which can decide the representative value of required resources of RSs adaptively based on the amount of required resources and the buffer state of each RS. Our simulation results show that the proposed scheme can increase performance of a multi-hop system. System capacity with the proposed adaptive scheme is increased by twice as large as one with a fixed representation value.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.2
• /
• pp.86-91
• /
• 2011

In the underwater communications, the acoustic channel is in poor communication conditions, such as long propagation delay, narrow bandwidth, and high bit-error rate. For these bad acoustic channels, we propose an efficient automatic repeat request (ARQ) for multi-hop underwater network by using the concepts of concurrent bi-directional transmission, multiple sub-packets, and overhearing data packet instead of the acknowledgement signal. Our results show that the proposed ARQ significantly reduces the transmission latency especially in high BER compared with the existing Stop and Wait ARQ.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1B
• /
• pp.136-143
• /
• 2010

In this paper, we investigate decode-and-forward (DF) relaying systems with a direct link between the source and the destination node. The objective of this paper is to determine the better relaying strategy between 3-hop DF relaying and dual-hop DF relaying with the best relay selection. Assuming Rayleigh fading channels, we present closed-form outage probability of the 3-hop relaying and the dual-hop relaying, respectively, and compare the performances by numerical investigation. Numerical results show that if the channel is poor, the outage performance of the 3-hop relaying is better than the dual-hop relaying.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.8
• /
• pp.1098-1104
• /
• 2011

Data communications networks at sea can be modelled by multi-layered networks with traditional carriers (RF, satellites), and BWA (wireless LAN, WiBro, LTE), which partially makes it possible the high speed communication services (WWW, VoIP) at sea. In this paper, a novel routing scheme (CPR) is proposed which selects an optimal carrier for each hop in routes based on carrier preferences (CP). The carrier preferences are measured proactively depending on the feasibility of transmission characteristics (transmission rate, cost, and latency time) of the carriers for each application. Performance was compared with that of the OMH-MW (Optimal Medium per Hop based on Max-Win) routing scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5B
• /
• pp.539-548
• /
• 2011

We propose an efficient cooperative ARQ (Automatic Repeat reQuest) scheme for single-hop and multi-hop underwater acoustic communications, in which cooperative nodes are used to provide more reliable alternative paths for a specific source-to-destination connection. This alternative path has higher channel quality than that of the direct source-destination path. In addition, during a packet-relay through multiple hops, the typical acknowledgement (ACK) signal is replaced with overhearing data packet returned back from the next hop. The usage of overhearing as an ACK improves the system performance. In this paper, we evaluate the proposed scheme by comparing it with a conventional S&W ARQ in terms of throughput efficiency. Computer simulation results show that the proposed cooperative retransmission scheme can significantly improve the throughput by increasing the probability of successful retransmission.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.21-31
• /
• 2014

In this paper, we propose VLC(visible light communication) based multi-hop multimedia data transmission system. The main contributions and features of the proposed system are as follows. First, the contribution of this research is to develope the LED communication based multi-hop transmission network system which can transmit multimedia data(audio data, video data) with long distance. Second, the developed system has the following features: In transmitter, audio data and video data are transmitted via multi-hops using two channels. The relay in audio channel receives digital audio signal by using photo diode and then transmits the signal to receiver after error checking and amplifying. The receiver receives the encoded audio data via photo diode and then converts to analog audio signal by using decoding and amplifying. The relay in video channel receives video signal by using photo diode and then amplify the video signal using OP-AMP and then transmits the signal to receiver. The receiver amplifies the received signal from photo diode and then sends it to the monitor. The performance evaluation of the proposed system is conducted in the laboratory with fluorescent light source. The results of the performance evaluation confirm that the system can provide high quality multimedia data transmission from transmiter to receiver via multi-hop relays in a long distance while we can see there are differences in the transmitted multimedia(audio and video) quality according to the used LED colors.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.11
• /
• pp.763-770
• /
• 2014

In traditional routing protocols including LEACH for wireless sensor networks, nodes suffer from unbalanced energy consumption because the nodes require large transmission energy as the distance to the sink node increase. Multi-hop based routing protocols have been studied to address this problem. In existing protocols, each cluster head usually chooses the closest head as a relay node. We propose LEACH-CHT, in which cluster heads choose the path with least energy consumption to send data to the sink node. In our research, each hop, a cluster head selects the least cost path to the sink node. This method solves the looping problem efficiently as well as make it possible that a cluster head excludes other cluster heads placed farther than its location from the path, without additional energy consumption. By balancing the energy consumption among the nodes, our proposed scheme outperforms existing multi-hop schemes by up to 36% in terms of average network lifetime.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.8
• /
• pp.688-696
• /
• 2013

In wireless sensor networks, real-time applications have to ensure the timely delivery of real-time data. Recently, OMLRP (On-demand Multi-hop Look-ahead Routing Protocol) has been proposed to improve the timeliness of wireless sensor networks. The protocol needs initialization time to establish multi-hop information based routing path because it performs incremental look-ahead of the information. Consequently, the protocol deteriorates DDSR (Deadline Delivery Success Ratio) as an event moves because it takes little consideration of event mobility. In this paper, we proposed a Real-time Routing for Events Mobility (RREM) which exploits a data redirection in order to improve the DDSR of moving events. Instead of recollecting muti-hop look-ahead information, the RREM redirects the data to a sensor node holding the information collected in a previous round. We verify the timeliness and energy efficiency of RREM using various MatLab simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9C
• /
• pp.887-895
• /
• 2009

This paper proposes a cooperative power allocation with the use of partial channel information (e.g., the average signal-to-noise ratio (SNR) and transmit correlation) in multi-cell dual-hop multi-input single-output (MISO) relay systems. In a dual-hop MISO relay channel, it is desirable to allocate the transmit power between dual-hop links to maximize the end-to-end capacity. We consider the maximization of the end-to-end capacity of a dual-hop MISO relay channel under sum-power constraint. The proposed scheme adaptively allocates the transmit power considering the average channel gain of the target relay and the transmit correlation of the desired and inter-relay interference channel from adjacent relays. It is shown by means of upper-bound analysis that the end-to-end capacity can be maximized by making the angle difference of the principal eigenvectors of the desired and inter-relay interference channel orthogonal in highly-correlated channel environments. Finally, the performance of the proposed scheme is verified by computer simulation.