• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.21 no.5
• /
• pp.81-96
• /
• 2018

The purpose of this study is to analyze the characteristics of vegetation changes and structures in the buffer green zone of Sihwa Industrial Complex and propose environmental, ecological and multi-functional vegetation management directions. The density of the Pinus thunbergii decreased from $23.1trees/100m^2$ in 2006 to $9.6trees/100m^2$ in 2017 due to the influence of thinning works. Its green volume increased from $0.97m^3/m^2$ to $2.02m^3/m^2$, contributing to the improvement of the atmospheric environment and promotion of biodiversity. The density of deciduous broad-leaved trees at the top maintained at $18{\sim}21trees/100m^2$. In the areas where the understory vegetation was removed, Pueraria lobata spread as an invasive plant and disturbed the forest. In the areas where the understory vegetation was not removed, various native plant species including the Rhus javanica and Celtis sinensis were introduced and contributed to the development of a forest in a multiple structure. There was a concern with the spread of Robinia pseudoacacia which developed into understory vegetation in Pinus thunbergii forest and some canopy forest. The study proposed vegetation management directions for the back, top and front side according to the physical structure of large-scale buffer green zone formed in a long linear form and the usage characteristics of adjacent land.

• Composites Research
• /
• v.35 no.6
• /
• pp.469-476
• /
• 2022

In this paper, the microwave absorbing characteristics after the impact of the radar-absorbing structure (RAS) consisting of periodic pattern sheet (PPS) and glass fiber-reinforced plastic (GFRP) were experimentally investigated. The fabricated RAS effectively absorbed the microwave in the X-band (8.2-12.4 GHz). In order to induce the damage to the RAS, a low-velocity impact test with various impact energy of 15, 40, and 60 J was conducted. Afterward, the impact damage was observed by using visual inspection, non-destructive test, and image processing method. Moreover, the absorbing performance of intact and damaged RAS was measured by the free-space measurement system. The experiment results revealed that the delamination damage from the impact energy of 15 J did not considerably affect the microwave absorbing performance of the RAS. However, fiber breakage and penetration damage with a relatively large damaged area were occuured when the impact energy was increased up to 40 J and 60 J, and these failures significantly degraded the microwave absorbing characteristics of the RAS.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.12
• /
• pp.1870-1883
• /
• 1993

In this paper, in order to build up the User Network Interface based on ATM, a study on traffic control techniques which should be performed by main function groups-B 75,5 NT2, LEX-is discussed. The structure of B-NT2 which is the most important function group In the User Network Interface is defined in quite a simple manner in addition, the functional blocks of LEX are defined in a similar manner as those of B NT2. It is possible to distribute total traffic control functions by using the similarities between B-NT2 and LEX and by allocating virtual path identifiers fixedly according to the characteristics of the traffics. For the traffic control techniques of ATM, relations among Connection Admtsslon Control, Usage Parameter Control and Bandwidth Allocation Control are defined and Multi Rule Base structure to realize optimal control functions according to the characteristics of the source traffics is proposed. And the Real-time Variable Window algorithmsimply designed to be suitable for the Multi Rule Base architecture is also proposed. The performances of the proposed algorithm are analyzed through the computer simulation by generating on-off source traffic in a virtual system that has the form of the proposed hardware. The analyzed results show that the distributed control is possible and that the implementation of the proposed architecture and algorithm is possible.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.65-65
• /
• 2015

In this talk, I will introduce two topics. The first topic is the polymer light emitting diodes (PLEDs) using graphene oxide quantum dots as emissive center. More specifically, the energy transfer mechanism as well as the origin of white electroluminescence in the PLED were investigated. The second topic is the facile synthesis of eco-friendly III-V colloidal quantum dots and their application to light emitting diodes. Polymer (organic) light emitting diodes (PLEDs) using quantum dots (QDs) as emissive materials have received much attention as promising components for next-generation displays. Despite their outstanding properties, toxic and hazardous nature of QDs is a serious impediment to their use in future eco-friendly opto-electronic device applications. Owing to the desires to develop new types of nanomaterial without health and environmental effects but with strong opto-electrical properties similar to QDs, graphene quantum dots (GQDs) have attracted great interest as promising luminophores. However, the origin of electroluminescence (EL) from GQDs incorporated PLEDs is unclear. Herein, we synthesized graphene oxide quantum dots (GOQDs) using a modified hydrothermal deoxidization method and characterized the PLED performance using GOQDs blended poly(N-vinyl carbazole) (PVK) as emissive layer. Simple device structure was used to reveal the origin of EL by excluding the contribution of and contamination from other layers. The energy transfer and interaction between the PVK host and GOQDs guest were investigated using steady-state PL, time-correlated single photon counting (TCSPC) and density functional theory (DFT) calculations. Experiments revealed that white EL emission from the PLED originated from the hybridized GOQD-PVK complex emission with the contributions from the individual GOQDs and PVK emissions. (Sci Rep., 5, 11032, 2015). New III-V colloidal quantum dots (CQDs) were synthesized using the hot-injection method and the QD-light emitting diodes (QLEDs) using these CQDs as emissive layer were demonstrated for the first time. The band gaps of the III-V CQDs were varied by varying the metal fraction and by particle size control. The X-ray absorption fine structure (XAFS) results show that the crystal states of the III-V CQDs consist of multi-phase states; multi-peak photoluminescence (PL) resulted from these multi-phase states. Inverted structured QLED shows green EL emission and a maximum luminance of ~45 cd/m2. This result shows that III-V CQDs can be a good substitute for conventional cadmium-containing CQDs in various opto-electronic applications, e.g., eco-friendly displays. (Un-published results).

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 1999.04a
• /
• pp.37-44
• /
• 1999

A number of the retail and traditional market customer is decrease, whereas that of the supermarket in department-store customers in is increase. This case suggests that customers have a preference for much more comfortable and pleasant shopping places And making a resonable purchase in the supermarkets where we can find various goods and price zone, is now garden variety. It is a current course that once the manager ask an architect for multi-functional space design in department-store and then the architect compose a team and start to design. Of course, the team of planner thinking manage give the design team the basic material data such as commerce analysis and the use of each layer in the department store but, the design team solve the assignment by architectural form, functional space plan and the limited architecture law. After establishing general design for architecture, we can ask shopping-mall distribution, products display and interior design of the interior design general design for architecture, we can ask shopping-mall distribution, products display and interior design of the interior design team. so it is inevitable that the interior design team concerning M·D can find lots of complementary factors with architecture design. The purpose of this study is analyzing the differences of architecture design, which has to accept the limited law and interior design concerning M·D, satisfying the structure and the law in the future design for the department-store. Also the purpose of this thesis is suggestion the items architects and interior designers research into together to make the inner space ideally.

• Korean Institute of Interior Design Journal
• /
• v.15 no.3 s.56
• /
• pp.118-125
• /
• 2006

A number of the retail and traditional market customer is decrease, whereas that of the supermarket in department-store customers is increase. This case suggests that customers have a preference for much more comfortable and pleasant shopping places And making a reasonable purchase in the supermarkets where we can find various goods and price zone, is now garden variety. It is a current course that once the manager ask an architect for multi-functional space design in department-store and then the architect compose a team and start to design. Of course, the team of planner thinking manage give the design team the basic material data such as commerce analysis and the use of each layer in the department store but, the design team solve the assignment by architectural form, functional space plan and the limited architecture law, After establishing general design for architecture, we can ask shopping-mall distribution, products display and interior design of the interior design team. so it is inevitable that the interior design team concerning M$\cdot$D can find lots of complementary factors with architecture design. The purpose of this study is analyzing the differences of architecture design, which has to accept the limited law and interior design concerning M$\cdot$D, satisfying the structure and the law in the future design for the department-store. Also the purpose of this thesis is suggestion the items architects and interior designers research into together to make the inner space ideally.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.6
• /
• pp.2963-2978
• /
• 2017

The Top-K query is currently played a key role in a wide range of road network, decision making and quantitative financial research. In this paper, a Top-K recommendation algorithm is proposed to solve the cold-start problem and a tag generating method is put forward to enhance the semantic understanding of the OLAP session. In addition, a recommendation system for OLAP sessions called "OLAP4R" is designed using collaborative filtering technique aiming at guiding the user to find the ultimate goals by interactive queries. OLAP4R utilizes a mixed system architecture consisting of multiple functional modules, which have a high extension capability to support additional functions. This system structure allows the user to configure multi-dimensional hierarchies and desirable measures to analyze the specific requirement and gives recommendations with forthright responses. Experimental results show that our method has raised 20% recall of the recommendations comparing the traditional collaborative filtering and a visualization tag of the recommended sessions will be provided with modified changes for the user to understand.

• Textile Coloration and Finishing
• /
• v.23 no.3
• /
• pp.201-209
• /
• 2011

With a new method of applying chitosan and alginate onto cellulose, multi-coated cotton fabrics with chitosan and alginate were prepared and characterized. To coat cotton with chitosan, raw cotton was dipped in chitosan solution, mangled of 1kgf/$cm^2$, neutralized in 2 wt% NaOH soluton, washed, and dried at $60^{\circ}C$ oven. The chitosan-coated fiber was dipped in sodium alginate solution, 1kgf/$cm^2$ mangled, neutralized in 2 wt% $CaCl_2$ solution, washed, and dried at $60^{\circ}C$ oven, resulting in CCAC(coated cotton with chitosan and calcium alginate skin) fiber characteristics. Excellent absorbancy of distilled water and saline solution was observed by the absorption test on cotton fabric treated with CCAC(0.5 wt% calcium alginate) and 0.5 wt% calcium alginate respectively. The SEM photograph confirmed the uniform coating on the cotton fabric surface.

• Korean Institute of Interior Design Journal
• /
• no.31
• /
• pp.3-11
• /
• 2002

Shopping malls in Seoul become important urban public space where teens and youths as well as the elderly come easily and enjoy thorned environment. This study examines design motifs, structures and effects of theme design of three shopping malls-Lotte World, Coex Mall, and Central City-in Seoul, Korea. The study quotes Lynch`s five image elements-paths, nodes, landmarks, districts, and edges in the shopping malls in order to analyze internal structure of the shopping malls and theme design elements. The theme design of the shopping malls was often used the images of "city parks", "future city", "foreign tourist places", "carnival and festival", and "old towns" to evoke nostalgia of the past and fantasy of the future. The study finds that theme design was emphasized at the area of corridors-path, plazas-nodes and special districts such as movie theater and food courts. The study concludes that theme design in the three shopping malls should consider local(Korean) motifs in design properly and consider educative effects of the design on teens and youths. Thus, theme design of the shopping malls should meet multi-functional roles of the spaces aesthetically and socially, The data and analysis of this study can contribute to improve theme design of shopping malls in Seoul, Korea.ve theme design of shopping malls in Seoul, Korea.

• Journal of the Korean Magnetic Resonance Society
• /
• v.7 no.1
• /
• pp.37-45
• /
• 2003

Human CD99 is a ubiquitous 32-kDa transmembrane protein encoded by mic2 gene. Recently it has been reported that expression of a splice variant of CD99 transmembrane protein (Type I and Type II) increases invasive ability of human breast cancer cells. To understand structural basis for cellular functions of CD99 Type II, we have initiated studies on hCD99$\^$TMcytoI/ using circular dichroism (CD) and multi-dimensional NMR spectroscopy. CD spectrum of hCD99$\^$TMytoI/ in the presence of 200mM DPC and CHAPS displayed an existence ${\alpha}$-helical conformation, showing that it could form an ${\alpha}$-helix under membrane environments. In addition, we have found that the cytoplasmic domain of CD99 would form symmetric dimmer in the presence of transmembrane domain. Although it has been rarely figured out the correlation between structure and functional mechanism of hCD99$\^$TMcytoI/, the dimerization or oligomerization would play an important role in its biological function.