• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2005년도 추계학술대회 논문집
• /
• pp.37-42
• /
• 2005

해상에서 항법시스템의 고장이나 중단에도 불구하고 연속적인 항법 서비스의 제공이 가능하도록 하는 Fail-Safe Seaway 방안이 필요하다. 모든 위성 및 지상전파항법의 통합전파항법기술을 위해 본 논문에서는 소프트웨어 라디오 기술을 이용한 수신기 특히, GPS 수신기의 신호처리 알고리즘 설계에 초점을 맞춘다. 현재 소프트웨어 GPS 수신기의 가장 큰 문제점은 실시간 구현의 어려움에 있다. GPS 신호와 같이 넓은 대역폭을 갖는 신호를 다중 상관기로 구현하는데 있어서, 상용 프로세서에서는 많은 연산량이 요구되어 실시간 구현이 어렵기 때문이다 본 논문은 실시간 구현 시에 요구되는 많은 연산량을 해결하기 위해 소프트웨어 GPS 수신기 내부에서 생성하는 다중비트의 반송파 및 코드를 일정한 패턴으로 간소화시켜 연산량을 크게 감소시키는 방법을 제안한다.

• 한국통신학회논문지
• /
• 제34권12C호
• /
• pp.1123-1130
• /
• 2009

네트워크 분야와 멀티미디어 기술의 발전에 따라 실시간 처리에 대한 연구가 각광을 받고 있다. 또한, 많은 용용 분야에서 신뢰도가 높은 실시간 통신에 대한 필요성이 대두되고 있다. 이 논문에서는 큐브 구조를 갖는 다중 컴퓨터에 대한 실시간 통신 알고리즘을 벡터를 이용하여 구현하려고 한다. 큐브 형태의 n 차원 다중 컴퓨터에서 n 개의 안전 벡터는 이웃한 노드들의 결함의 분포와 근사적인 결함의 척도와 관련되어 있다. 이 연구에서는 실시간 채널에서 서로 설정하는 다른 우회 경로를 찾는 알고리즘을 개발한다. 개발한 알고리즘과 기존의 방법들을 비교하여 성능을 분석한다. 시뮬레이션 결과는 이미 제안된 알고리즘과 비교하여 보다 효율적임을 보이고 있다.

• Smart Structures and Systems
• /
• 제22권4호
• /
• pp.383-397
• /
• 2018

Traditional base isolation systems focus on isolating the seismic response of a structure in the horizontal direction. However, in regions where the vertical earthquake excitation is significant (such as near-fault region), a traditional base-isolated building exhibits a significant vertical vibration. To eliminate this shortcoming, a rocking-isolated system named Telescopic Column (TC) is proposed in this paper. Detailed rocking and isolation mechanism of the TC system is presented. The seismic performance of the TC is compared with the traditional elastomeric bearing (EB) and friction pendulum (FP) base-isolated systems. A 4-storey reinforced concrete moment-resisting frame (RC-MRF) is selected as the reference superstructure. The seismic response of the reference superstructure in terms of column axial forces, base shears, floor accelerations, inter-storey drift ratios (IDR) and collapse margin ratios (CMRs) are evaluated using OpenSees. The results of the nonlinear dynamic analysis subjected to multi-directional earthquake excitations show that the superstructure equipped with the newly proposed TC is more resilient and exhibits a superior response with higher margin of safety against collapse when compared with the same superstructure with the traditional base-isolation (BI) system.

• ETRI Journal
• /
• 제34권3호
• /
• pp.388-398
• /
• 2012

Three-dimensional (3D) memories using through-silicon vias (TSVs) will likely be the first commercial applications of 3D integrated circuit technology. A 3D memory yield can be enhanced by vertical redundancy sharing strategies. The methods used to select memory dies to form 3D memories have a great effect on the 3D memory yield. Since previous die-selection methods share redundancies only between neighboring memory dies, the opportunity to achieve significant yield enhancement is limited. In this paper, a novel die-selection method is proposed for multilayer 3D memories that shares redundancies among all of the memory dies by using additional TSVs. The proposed method uses three selection conditions to form a good multi-layer 3D memory. Furthermore, the proposed method considers memory fault characteristics, newly detected faults after bonding, and multiple memory blocks in each memory die. Simulation results show that the proposed method can significantly improve the multilayer 3D memory yield in a variety of situations. The TSV overhead for the proposed method is almost the same as that for the previous methods.

• Journal of Electrical Engineering and Technology
• /
• 제8권4호
• /
• pp.760-765
• /
• 2013

An Interline Power Flow Controller (IPFC) is a converter based controller which compensates and balance the power flow among multi-lines within the same corridor of the multi-line subsystem. The Interline Power Flow Controller consists of a voltage source converter based Flexible AC Transmission System (FACTS) controller for series compensation. The reactive voltage injected by individual Voltage Source Converter (VSC) can be controlled to regulate active power flow in the respective line in which one VSC regulates the DC voltage, the other one controls the reactive power flows in the lines by injecting series active voltage. In this paper, a circuit model for IPFC is developed and simulation of interline power flow controller is done using the proposed circuit model. Simulation is done using MATLAB Simulink and PSPICE. The results obtained by MATLAB are compared with the results obtained by PSPICE and compared with theoretical values.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.338-345
• /
• 2013

Induction motors play an increasing importance in industrial manufacturing. Therefore, the state monitoring systems also have been considering as the key in dealing with their negative effect by absorbing faulty symptoms in motors. There are numerous proposed systems in literature, in which, several kinds of signals are utilized as the input. To solve the multiple faults problem of induction motors, like the proposed system, the vibration signals is good candidate. In this study, a new signal processing scheme was utilized, which transforms the time domain vibration signal into the spatial domain as an image. Then the spatial features of converted image then have been extracted by applying the dominant neighbourhood structure (DNS) algorithm. In addition, these feature vectors were evaluated to obtain the fruitful dimensions, which support to discriminate between states of motors. Because of reliability, the conventional one-against-all (OAA) multi-class support vector machines (MCSVM) have been utilized in the proposed system as classifier module. Even though examined in severity levels of signal-to-noise ratio (SNR), up to 15dB, the proposed system still reliable in term of two criteria: true positive (TF) and false positive (FP). Furthermore, it also offers better performance than five state-of-the-art systems.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권8호
• /
• pp.4160-4173
• /
• 2019

Borescopes facilitate the inspection of areas inside machines and systems that are not directly accessible for visual inspection. They offer real-time, up-close access to confined and hard-to-access spaces without having to dismantle or destructure the object under inspection. Borescopes are ideal instruments for routine maintenance, quality inspection and monitoring of systems and structures. The main application being fault or defect detection, it is useful to have measuring capability to quantify object dimensions in a target area. High-end borescopes use multi-optic solutions to provide measurement information of viewed objects. Multi-optic solutions can provide accurate measurements at the expense of structural complexity and cost increase. Measuring functionality is often unavailable in low-end, single camera borescopes. In this paper, a single camera measurement solution that enables the size estimation of viewed objects is proposed. The proposed solution computes and overlays a scaled grid of known spacing value over the screen view, enabling the human inspector to estimate the size of the objects in view. The proposed method provides a simple means of measurement that is applicable to low-end borescopes with no built-in measurement capability.

• 지구물리
• /
• 제2권1호
• /
• pp.45-56
• /
• 1999

경북 포항시 일월동 지역에서 482 m 길이의 동서 방향의 측선에 대한 탄성파 굴절법 및 반사법탐사를 실시하였다. 자료수집에서 지오폰 간격과 오프셋은 각각 2 m로 설정하였으며, 발파는 끝점 발파 배열 방법을 이용하여 한 발파점마다 24채널을 기록하였다. 발파 간격은 2 m로 하여 측선의 전구간에서 탄성파 자료를 취득하였다. 굴절법탐사 자료의 해석은 수평다층구조 이론을 적용하여 실시하였으며, 반사파 자료 처리는 트레이스 편집, 이득조절, 공심점 분류, 수직경로시차 보정, 뮤트 과정을 거친 후 동일 오프셋 모음을 취하여 단일중첩 탄성파 단면을 작성하고 필터링을 거친 후 해석에 이용하였다. 굴절법탐사 자료 해석결과 조사 측선 구간의 천부지반은 크게 2층으로 구분되는데, 상부층은 267∼566 m/s 의 P파 속도 분포를 보여 대체로 미고결 퇴적층이며, 하부층은 1096∼3108 m/s 의 P파 속도 분포를 보여 풍화암∼경암의 암반으로 구성되었음을 알 수 있다. 상부 미고결층은 수평적으로 큰 변화를 보이고 있는 바, 측선의 동측 구간에는 평균 400 m/s 의 P파 속도를 보이는 미고결 사암층이 3∼5 m 두께로 발달되어 있으며, 측선의 서측 구간은 평균 340 m/s 의 P파 속도를 갖는 매립토층이 8∼10 m 두께로 발달된 것으로 해석된다. 반사파 단면도에서 조사구간에 3개의 고각의 단층대가 분포하며, 이들 단층대를 경계로 기반암이 나누어져 있으며 단층대 사이의 구간은 비교적 안정된 지반으로 해석된다. 대형 건물의 위치는 단층대를 피하여 안정된 지반 구간에 위치해야 함을 고려할 때, 그 기초를 3∼10 m 깊이 하부에 위치하는 기반암 내에 설치되도록 설계되어야 할 것이다.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 2001년도 The Pacific Aisan Confrence On Intelligent Systems 2001
• /
• pp.145-150
• /
• 2001

A Controlled Ecological Life Support System(CELSS) is essential for man to live a long time in a closed space such as a lunar base or a mars base. Such a system may be an extremely complex system that has a lot of facilities and circulates multiple substances,. Therefore, it is very difficult task to control the whole CELSS. Thus by regarding facilities constituting the CELSS as agents and regarding the status and action as information, the whole CELSS can be treated as multi-agent system(MAS). If a CELSS can be regarded as MAS the CELSS can have three advantages with the MAS. First the MAS need not have a central computer. Second the expendability of the CELSS increases. Third, its fault tolerance rises. However it is difficult to describe the cooperation protocol among agents for MAS. Therefore in this study we propose to apply reinforcement learning (RL), because RL enables and agent to acquire a control rule automatically. To prove that MAS and RL are effective methods. we have created the system in Java, which easily gives a distributed environment that is the characteristics feature of an agent. In this paper, we report the simulation results for material circulation control of the CELSS by the MAS and RL.

• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2005년도 6th 2005 International Conference on Computers, Communications and System
• /
• pp.147-151
• /
• 2005

CAN(Controller Area Network) is a simple and efficient network system for real time control and measurement. As it is not only good at error detection but also strong in electromagnetic interference, CAN has been widely used all over the industries. Basically, CAN needs a master node in charge of sensor data collection, node scheduling for data transmission to a monitoring system and error detection. According to the number of mater nodes, the CAN system is classified into two type of master system. One is a single master system that has only one master node and the other is a multi-master system where any sensor node can become a master node depending on the system's conditions. While it has the advantage of its fault tolerance, the multi-master system will suffer form the overall performance degradation when a defect is found in the master node. It is because all sensor nodes pertaining to a defective master node lose their position. Moreover, it is difficult and expensive to implement. For a single master system, the whole system will be broken down when a problem happens to a single master. In this paper, a dynamic master system is presented that there are several sub-master nodes of which basic functions are those of other sensor nodes at ordinary times but dynamically changed to replace the failing master node. An effective scheduling algorithm is also proposed to choose an appropriate node among sub-master nodes, where each sub-master node has its precedence value. The performance of the dynamic master system is experimented and analyzed.