• 한국정밀공학회지
• /
• 제23권4호
• /
• pp.183-190
• /
• 2006

Digital 3D Real Object Duplication System (RODS) consists of 3D Scanner and Solid Freeform Fabrication System (SFFS). It is a device to make three-dimensional objects directly from the drawing or the scanning data. In this research, we developed an office type SFFS based on Three Dimensional Printing Process and an industrial SFFS using Dual Laser. An office type SFFS applied sliding mode control with sliding perturbation observer (SMCSPO) algorithm for control of this system. And we measured process variables about droplet diameter measurement and powder bed formation etc. through experiments. In case of industrial type SFFS, in order to develop more elaborate and speedy system for large objects than existing SLS process, this study applies a new Selective Dual-Laser Sintering (SDLS) process and 3-axis Dynamic Focusing Scanner for scanning large area instead of the existing f lens. In this process, the temperature has a great influence on sintering of the polymer. Also the laser parameters are considered like that laser beam power, scan speed, and scan spacing. Now, this study is in progress to evaluate the effect of experimental parameters on the sintering process.

• 소성∙가공
• /
• 제26권6호
• /
• pp.341-347
• /
• 2017

Flexibly-reconfigurable roll forming (FRRF) is a novel sheet metal forming technology conducive to produce multi-curvature surfaces by controlling strain distribution along longitudinal direction. Reconfigurable rollers could be arranged to implement a kind of punch die set. By utilizing these reconfigurable rollers, desired curved surface can be formed. In FRRF process, three-dimensional surface is formed from two-dimensional curve. Thus, it is difficult to predict the forming result. In this study, a regression analysis was suggested to construct a predictive model for a longitudinal curvature of FRRF process. To facilitate investigation, input parameters affecting the longitudinal curvature of FRRF were determined as maximum compression value, curvature radius in the transverse direction, and initial blank width. Three-factor three-level full factorial experimental design was utilized and 27 experiments using FRRF apparatus were performed to obtain sample data of the regression model. Regression analysis was carried out using experimental results as sample data. The model used for regression analysis was a quadratic nonlinear regression model. Determination factor and root mean square root error were calculated to confirm the conformity of this model. Through goodness of fit test, this regression predictive model was verified.

• Journal of Biosystems Engineering
• /
• 제38권2호
• /
• pp.163-170
• /
• 2013

Purpose: The purpose of this study is to provide analysis of physiological, biomechanical responses occurring from the operation to lifting or twist lifting task appears frequently in agricultural work. Methods: This study investigated the changes of physiological factors such as heart rate, heart rate variability (HRV) and biomechanical factors such as physical activity and kinetic analysis in the task of twisting at the waist while lifting. Results: Heart rates changed significantly with the workload. The result indicated that the workload of 2 kg was light intensity work, and the workload of 12 kg was hard intensity work. Physical activity increased as the workload increased both on wrist and waist. Besides, stress index of the worker increased with the workload. Dynamic load to herniated discs was analyzed using inertial sensor, and the angular acceleration and torque increased with the workload. The proposed measurement system can measure the recipient's physiological and physical signals in real-time and analyzed 3-dimensionally according to the variety of work load. Conclusions: The system we propose will be a new method to measure agricultural workers' multi-dimensional signals and analyze various farming tasks.

• 방송공학회논문지
• /
• 제13권5호
• /
• pp.574-585
• /
• 2008

입체음향은 가상환경 시스템에서 중요한 부분을 차지하고, 청각 재생과 인간-컴퓨터 상호작용에서 점점 더 각광받고 있다. 본 논문은 가상환경을 위한 새로운 실시간 3차원 입체음향 재생 시스템을 제안한다. 먼저 가상공간에서의 임펄스 응답을 계산하는 방법을 제안한다. 입체음향과 관련된 가상공간 정보를 전달하기 위해서, 가상 환경을 위한 재질 정보를 포함하는 Enhanced DXF 파일 형식을 제안한다. 그리고 멀티채널 사운드 패닝 시스템을 구현하였다. 컴퓨터 환경에서 실험하여 제안한 방법의 유용성을 보여준다.

• 대한조선학회논문집
• /
• 제44권4호
• /
• pp.360-369
• /
• 2007

When a large ship is advancing in waves, ship undergoes the hydroelastic response, and this have influence on structural stability and the fatigue destruction etc. of ship. The main objective of this research is to develop an accurate and convenient method on the hydroelastic response analysis of ships on the real sea states. We analyzed hydroelastic responses, which is formulated by finite element method. The numerical approach for the hydroelastic responses is based on the combination of the three dimensional source distribution method, the dynamic response analysis and the spectral analysis method. The calculated results show good agreement with the experimental and calculated ones by Watanabe.

• 한국기계가공학회지
• /
• 제18권8호
• /
• pp.51-59
• /
• 2019

Flow forming is an eco-friendly and high-efficiency plastic deformation process with fewer chips during a process which is specifically used to manufacture seamless tubular products like tire wheels, rocket motor cases etc. On the development of mortar barrel using Inconel718 tube, some flow formed products had dimensional errors on their thickness. In this study, our purpose is to optimize the process conditions with the smallest dimensional error. In order to find an optimum process condition, 2D axisymmetric FEM simulation analyses with Taguchi method were conducted. Geometric variables (attack angle, flatting angle, roller nose radius) and operating parameters (depth of forming, feed rate) are considered as control factors. Forward flow forming with single roller was first analyzed to determine the effective factors using AFDEX software and attack angle of the roller was identified as the most influential factor. Also, the nose radius of the rollers was confirmed as a significant factor in multi-rollers flow forming system. The effect of rollers offset values are also studied and finally, we proposed optimal conditions to improve the accuracy of flow forming process with Inconel718 tube for mortar barrel manufacturing.

• 한국항공우주학회지
• /
• 제50권6호
• /
• pp.367-376
• /
• 2022

본 연구에서는 정상 및 비정상 공력 해석이 가능한 3차원 아음속 비정렬 패널 프로그램을 개발하고 검증하였다. 물체의 표면을 삼각형 또는 사각형 패널에 source와 doublet의 potential을 분포하여 모델링하였다. 따라서 복잡한 형상과 다물체도 쉽게 모델링 할 수 있다. Kelvin theory와 비정상 Kutta condition을 이용하여 비정상 유동에서 wake의 doublet 크기를 결정하였다. 2차원 및 3차원에서 정상 및 비정상 유동을 해석하여 그 결과를 해석해와 기존의 수치해와 비교하였다.

• Structural Engineering and Mechanics
• /
• 제89권2호
• /
• pp.213-223
• /
• 2024

This paper proposes a composite design of fuzzy adaptive control scheme based on TMD RC structural system and the gain of two-dimensional fuzzy control is controlled by parameters. Monitoring and learning in LMI then produces performance indicators with a weighting matrix as a function of cost. It allows to control the trade-off between the two efficiencies by adjusting the appropriate weighting matrix. The two-dimensional Boost control model is equivalent to the LMI-constrained multi-objective optimization problem under dual performance criteria. By using the proposed intelligent control model, the fuzzy nonlinear criterion is satisfied. Therefore, the data connection can be further extended. Evaluation of controller performance the proposed controller is compared with other control techniques. This ensures good performance of the control routines used for position and trajectory control in the presence of model uncertainties and external influences. Quantitative verification of the effectiveness of monitoring and control. The purpose of this article is to ensure access to adequate, safe and affordable housing and basic services. Therefore, it is assumed that this goal will be achieved in the near future through the continuous development of artificial intelligence and control theory.

• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.19-33
• /
• 2024

In nuclear thermal-hydraulic system codes, most correlations used for vertical pipes, under downward two-phase flow, have been developed considering small pipes or pool systems. This suggests that there could be uncertainties in applying the correlations to accident scenarios involving large vertical pipes owing to the difference in the characteristics of two-phase flows, or flow conditions, between large and small pipes. In this study, we modified the Multi-dimensional Analysis of Reactor Safety KINS Standard (MARS-KS) code using correlations, such as the drift-flux model and two-phase multiplier, developed in a plant-scale air-inflow experiment conducted for a pipe of diameter 600 mm under downward two-phase flow. The results were then analyzed and compared with those based on previous correlations developed for small pipes and pool conditions. The modified code indicated a good estimation performance in two plant-scale experiments with large pipes. For the siphon-breaking experiment, the maximum errors in water flow for modified and original codes were 2.2% and 30.3%, respectively. For the air-inflow accident experiment, the original code could not predict the trend of frictional pressure gradient in two-phase flow as / increased, while the modified MARS-KS code showed a good estimation performance of the gradient with maximum error of 3.5%.

• Korean Chemical Engineering Research
• /
• 제46권6호
• /
• pp.1087-1094
• /
• 2008

본 연구는 활성탄을 사용한 n-hexane의 흡착공정에 있어서 분자수준에서 시작하여 공정단계에 이르는 다중규모 모사에 관하여 기술한다. 분자모사에서는 GCMC(Grand Canonical Monte Carlo) 방법을 이용하여 활성탄에서 n-hexane의 등온흡착식을 예측하고, 2차원 전산유체역학(CFD; Computational fluid dynamics) 모사를 통하여 흡착컬럼 내 유체흐름에 대한 수력학적 특성을 파악한다. 공정모사단계에서는 분자모사 및 유체역학 모사에서 각각 얻은 등온흡착식과 축방향 확산계수값을 이용하여 n-hexane의 용출곡선을 얻는다. 이러한 3단계 다중규모 모사기법을 활용하여 얻은 공정모사 결과는 펄스응답의 실험결과와 비교해볼 때, 온도와 유량변화에 따른 1차 모멘트(평균 체류시간)에 관하여 약 20% 미만의 오차범위에서 일치함을 확인할 수 있다. 이 결과로부터 분자수준에서 시작하는 다중규모 모사는 필요한 실험횟수를 줄이면서 흡착공정 개발을 가속화할 수 있는 가능성을 보여준다.