• Journal of The Korean Digital Architecture Interior Association
• /
• v.11 no.2
• /
• pp.61-70
• /
• 2011

This study aims to establish the concept about a new approaching method dor remodeling in the planning step. also, this study sets up the way how to approach in a dimensional way by classifying the conceptual composition of the target housing as a method. The dimensional definition is as below. The one dimensional approach: the spot. the two dimensional approach: the line, the three dimensional approach: the apatial mass, the four dimensional approach: space + time, the n dimensional (multi-dimensional) approach: the space + time + emotion. The research findings are as follows : For the purpose of remodeling, the old housing should be viewed in the three dimensional shape and space. It is defined as multi-dimensional module method to design the shape and space of the target housing in a multi-dimensional point, considering the three dimensional space composition, the emotion of the user, the housing itself. and the time of the user.

• Transactions of Materials Processing
• /
• v.17 no.3
• /
• pp.155-160
• /
• 2008

We analyzed a sequence of multi-stage automatic cold forging processes composed of four axisymmetric processes followed by a non-axisymmetric process using rigid-plastic finite element based forging simulators. The forging sequence selected for an example involves a piercing process and a heading process accompanying folding or overlapping, which all make it difficult to simulate the processes. To reduce computational time and to enhance the solution reliability, only the non-symmetric process was analyzed by the three-dimensional approach after the axisymmetric processes were analyzed by the two-dimensional approach. It has been emphsized that this capability is very helpful in simulating the multi-stage automatic forging processes which are next to axisymmetric or involve several axisymmetric processes.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.3 s.96
• /
• pp.280-289
• /
• 2005

A single degree of freedom system and transmissibility are key concepts in many problems of vibration isolation. In order to apply this approach, however, several assumptions must be satisfied, which are often not realistic. For examples, in practical systems, vibration transmissions at multi-point with multi-degree of freedom(translational and rotational DOF) take place and mobilities or impedances of receiver structures cannot be ignored any more especially over high frequency range. Therefore, a multi-dimensional treatment is required for accurate estimation of dynamic behavior of the system. In this paper, an approach using vibrational power flow is introduced to deal with analysis of multi-dimensional vibration isolation system in a more practical way and in aspects of vibration isolations and vibration path analysis. Procedures of this approach and some results of research for vibrational power path analysis with rotational terms included are presented. Difficulties in this method are also discussed.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.195-200
• /
• 2007

We analyzed a sequence of multi-stage automatic cold forging processes composed of four axisymmetric processes followed by a non-axisymmetric process using rigid-plastic finite element based forging simulators. The forging sequence selected for an example involves a piercing process and a heading process accompanying folding or overlapping, which all make it difficult to simulate the processes. To reduce computational time and to enhance the solution reliability, only the non-symmetric process was analyzed by the three-dimensional approach after the axisymmetric processes were analyzed by the two-dimensional approach. It has been emphsized that this capability is very helpful in simulating the multi-stage automatic forging processes which are next to axisymmetric.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.1771-1774
• /
• 2003

Image segmentation is very important technique as preprocessing. It is used for various applications such as object recognition, computer vision, object based image compression. In this paper, a method which segments the multidimensional image using a hierarchical histogram approach, is proposed. The hierarchical histogram approach is a method that decomposes the multi-dimensional situation into multi levels of 1 dimensional situations. It has the advantage of the rapid and easy calculation of the histogram, and at the same time because the histogram is applied at each level and not as a whole, it is possible to have more detailed partitioning of the situation.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.12
• /
• pp.3236-3245
• /
• 1994

The nesting of two-dimensional patterns onto a given raw sheet has applications in a number industries. It is a common problem often faced by designers in the shipbuilding, garment making, blanking die design, glass and wood industries. This paper presents a multi-stage layout approach for nesting two-dimensional patterns by using artificial intelligence techniques with a relatively short computation time. The raw material with irregular boundaries and internal defects which must be considered in various cases of nesting was also investigated in this study. The proposed nesting approach consists of two stages : initial layout stage and layout improvement stage. The initial layout configuration is achieved by the self-organizing assisted layout(SOAL) algorithm while in the layout improvement stage, the simulated annealing(SA) is adopted for a finer optimization.

• The Journal of Korea Robotics Society
• /
• v.4 no.3
• /
• pp.210-217
• /
• 2009

This paper introduces a design of multi-dimensional complex emotional model for various complex emotional expression. It is a novel approach to design an emotional model by comparison with conventional emotional model which used a three-dimensional emotional space with some problems; the discontinuity of emotions, the simple emotional expression, and the necessity of re-designing the emotional model for each robot. To solve these problems, we have designed an emotional model. It uses a multi-dimensional emotional space for the continuity of emotion. A linear model design is used for reusability of the emotional model. It has the personality for various emotional results although it gets same inputs. To demonstrate the effectiveness of our model, we have tested with a human friendly robot.

• Ocean Systems Engineering
• /
• v.2 no.2
• /
• pp.137-145
• /
• 2012

Recent developments in underwater image recognition methods have received large attention by the ocean engineering researchers. In this paper, an improved bi-dimensional empirical mode decomposition (BEMD) approach is employed to decompose the given underwater image into intrinsic mode functions (IMFs) and residual. We developed a joint algorithm based on BEMD and Canny operator to extract multi-pixel edge features at multiple scales in IMFs sub-images. So the multiple pixel edge extraction is an advantage of our approach; the other contribution of this method is the realization of the bi-dimensional sifting process, which is realized utilizing regional-based operators to detect local extreme points and constructing radial basis function for curve surface interpolation. The performance of the multi-pixel edge extraction algorithm for processing underwater image is demonstrated in the contrast experiment with both the proposed method and the phase congruency edge detection.

• Smart Structures and Systems
• /
• v.15 no.3
• /
• pp.897-911
• /
• 2015

This study presents a novel approach based on advancements in Evolutionary Computation for data-driven modeling of complex multi-dimensional memory-dependent systems. The investigated example is a benchmark coupled three-dimensional system that incorporates 6 Bouc-Wen elements, and is subjected to external excitations at three points. The proposed technique of this research adapts Genetic Programming for discovering the optimum structure of the differential equation of an auxiliary variable associated with every specific degree-of-freedom of this system that integrates the imposed effect of vibrations at all other degrees-of-freedom. After the termination of the first phase of the optimization process, a system of differential equations is formed that represent the multi-dimensional hysteretic system. Then, the parameters of this system of differential equations are optimized in the second phase using Genetic Algorithms to yield accurate response estimates globally, because the separately obtained differential equations are coupled essentially, and their true performance can be assessed only when the entire system of coupled differential equations is solved. The resultant model after the second phase of optimization is a low-order low-complexity surrogate computational model that represents the investigated three-dimensional memory-dependent system. Hence, this research presents a promising data-driven modeling technique for obtaining optimized representative models for multi-dimensional hysteretic systems that yield reasonably accurate results, and can be generalized to many problems, in various fields, ranging from engineering to economics as well as biology.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.6
• /
• pp.674-677
• /
• 2004

This paper deals with a systematic approach for the construction of the fixed-delay tree search (FDTS) detector in the intersymbol interference channel. The approach is based on the efficient multi-dimensional space partitioning. The Voronoi diagram (VoD) and the Delaunay tessellation (DT) of the multi-dimensional space are applied to implement the algorithm. In the proposed approach, utilizing the geometric information contained in the VOD/DT, the relative location of the observation sequence is determined which has been shown to reduce the implementation complexity. Detailed construction procedures are discussed followed by an example from the intersymbol interference communication channel.