• 한국해양공학회지
• /
• 제28권3호
• /
• pp.193-198
• /
• 2014

An elastic cable with piecewise constant properties under the action of concentrated static loads is studied analytically. Analytic solutions for catenary cables are combined at the discontinuous points caused by the discontinuous elastic properties or concentrated loads. The application of the boundary conditions at both ends of the multi-component cable results in three algebraic non-linear equations for three unknown parameters, which are determined numerically. The solutions for the shape, tension, elongation, and cross-sectional contraction of the cable are expressed in closed forms. Some examples are given for cases of two- and three-dimensional loads.

• 인지과학
• /
• 제23권4호
• /
• pp.425-455
• /
• 2012

다차원 구어 단기기억 기제는 크게 음운적 통로와 어휘-의미적 통로로 구분된다. 전자를 음운단기기억, 후자를 의미단기기억이라고 할 수 있는데, 단기기억 과제를 정상적으로 수행하기 위해서는 두 통로 모두의 정보를 활발히 활용하여야 한다. 그리고 음운단기기억은 다시 음운입력완충기와 음운출력완충기로 나누어지며, 음운입력완충기는 음운자극의 입력 시, 음운출력완충기는 음운 산출 시에 작동한다. 본 연구에서는 유사한 수준의 전도 실어증 증상을 보이는 세 명의 환자에 대해, 각각의 언어 수행력을 구어 단기기억의 다차원적 측면에서 분석하였다. 그러기 위하여 세 명의 전도 실어증 환자들에게 단어 수준과 문장 수준에서 스스로 말하기, 따라말하기, 스스로 쓰기, 받아쓰기의 네 가지 양태의 언어과제를 실시하여 수행력을 비교 분석하였고, 숫자폭검사와 언어학습검사를 이용하여 음운단기기억력과 의미단기기억력을 평가하였다. 그 결과 세 대상자들은 네 양태의 언어 검사에서 다양한 수행력과 오반응 유형을 보였고, 단기기억력 검사 결과도 동일하게 나타나지 않았다. 즉 전도 실어증 환자들의 언어 수행력은 의미단기기억 또는 음운단기기억의 결함으로 설명될 수 있으며, 음운단기기억 가운데에서도 음운입력완충기, 음운출력완충기 혹은 둘 다의 결함 여부에 따라 언어특성이 상이하게 나타날 가능성을 제시하고 있다. 본 연구에서는 전도 실어증 환자들의 언어 검사와 단기기억력 검사 결과를 바탕으로, 언어와 다차원 구어 단기기억력과의 관계에 대하여 논의하고 있다.

• 한국콘텐츠학회논문지
• /
• 제19권2호
• /
• pp.516-524
• /
• 2019

본 연구는 도시재생 관점에서 입체도시의 효과를 밝히고, 국내 입체도시계획 관련 제도의 문제점과 한계를 고찰함으로써 제도적 개선방안을 제시하고자 수행되었다. 그리하여 사례 분석을 통해 도시공간 연결, 지역경제 활성화, 기반시설 확충, 주택 공급 등 입체도시의 도시재생 기능과 역할을 파악하였으며, 제도적 문제점으로 국유재산에 대한 사권설정 금지로 민간참여가 저해되고, 2차원적 토지이용계획에 의거한 획일적인 기반시설 설치 기준으로 일정비율 이상의 토지 확보가 없으면 입체공간 활용이 어려우며, 법률간 연계성이 미흡한 문제를 도출하였다. 결론적으로 지역기반 산업구조 다양화 및 도시기능 강화 등을 목표로 입체시설 추진을 적극 지원 유도하고, 구도심 구역을 대상으로 입체 복합개발을 추진하며, 노후주택가의 공원, 학교, 도로, 전통시장의 하부공간을 활용한 보행로, 지하상가, 주차장 등의 도시재생사업 실현을 위해 중앙정부, 지자체, 민간부문 간 협력이 이루어져야 한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.913-920
• /
• 1996

In this study, the counting method for multi-axial and multi-point load states was proposed. Using this counting method, the load spectrum is generated from the service load history which is measured for boom structure of excavator. Loading state for loading points of boom structure is described as a multi-dimensional state space. From this load spectrum, the stress spectrum was generated by FEM analysis using the superposition of the unit load. The cumulated damage at the severe damage point of In nm structure by the failure example is calculated by Palmgren-Miner's rule. As a result of this study, the fatigue life estimation using the multi-axial and multi-point load counting method is useful.

• 한국전산유체공학회지
• /
• 제2권1호
• /
• pp.46-53
• /
• 1997

The flow field around a three dimensional minivan-like body has been simulated. This study solves 3-D unsteady incompressible Navier-Stokes equations on a non-orthogonal curvilinear coordinate system using second-order accurate schemes for the time derivatives, and third/second-order scheme for the spatial derivatives. The Marker-and-Cell concept is applied to efficiently solve continuity equation. A H-H type of multi-block grid system is generated around a three dimensional minivan-like body. Turbulent flows have been modeled by the Baldwin-Lomax turbulent model. To validate present procedure, the flows around the Ahmed body with 12.5° of slant angle are simulated. A good agreement with other numerical results is achived. After code validation, the flows around a mimivan-like body are simulated. The simulation shows three dimensional vortex-pair just behind body. The flow separation is also observed on the rear of the body. It has concluded that the results of present study properly agreed with physical flow phenomena.

• 한국정밀공학회지
• /
• 제31권12호
• /
• pp.1077-1083
• /
• 2014

Multi-material Additive Manufacturing (AM) is being focused to apply for direct manufacturing of a product. In this paper, a three-dimensional circuit device (3DCD) fabrication technology based on the multi-material AM technology was proposed. In contrast with conventional two-dimensional Printed Circuit Board (PCB), circuit elements and conducting wires of 3DCD are placed in threedimensional configuration at multiple layers of the structure. Therefore, 3DCD technology can improve design freedom of an electronic product. In this paper, 3DCD technology is proposed based on AM technology. Two types of 3DCD fabrication systems were developed based on the Stereolithography and the Fused Deposition Modeling technologies. And the 3DCD samples which have same function were fabricated, successfully.

• 한국멀티미디어학회논문지
• /
• 제23권12호
• /
• pp.1540-1551
• /
• 2020

Aiming at the problem that the existing human behavior recognition algorithm cannot fully utilize the multi-level spatio-temporal information of the network, a human behavior recognition algorithm based on a dense three-dimensional residual network is proposed. First, the proposed algorithm uses a dense block of three-dimensional residuals as the basic module of the network. The module extracts the hierarchical features of human behavior through densely connected convolutional layers; Secondly, the local feature aggregation adaptive method is used to learn the local dense features of human behavior; Then, the residual connection module is applied to promote the flow of feature information and reduced the difficulty of training; Finally, the multi-layer local feature extraction of the network is realized by cascading multiple three-dimensional residual dense blocks, and use the global feature aggregation adaptive method to learn the features of all network layers to realize human behavior recognition. A large number of experimental results on benchmark datasets KTH show that the recognition rate (top-l accuracy) of the proposed algorithm reaches 93.52%. Compared with the three-dimensional convolutional neural network (C3D) algorithm, it has improved by 3.93 percentage points. The proposed algorithm framework has good robustness and transfer learning ability, and can effectively handle a variety of video behavior recognition tasks.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.515-516
• /
• 2007

• 충청수학회지
• /
• 제27권2호
• /
• pp.237-242
• /
• 2014

In this paper we provide a valuation method for multi-asset derivatives with single jump regime-switching volatilities. We suppse that volatilities of assets are affected by an n-dimensional independent Markov regime-switching process.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.87.1-87.1
• /
• 2005