• Title/Summary/Keyword: Multi-codes

Search Result 395, Processing Time 0.025 seconds

A Process Analysis of the Employment Preparation of Chinese International Marriage Migrant Women (중국국적 결혼이주여성들의 취업준비 경험에 대한 과정분석)

  • Kong, Su Youn;Yang, Sungeun
    • Journal of Families and Better Life
    • /
    • v.32 no.1
    • /
    • pp.133-150
    • /
    • 2014
  • This study is aimed at examining the employment preparation of Chinese migrant women and exploring measures to support their employment in a practical manner. To accomplish the objectives, in-depth interviews with 15 Han Chinese and Korean Chinese women, who represent the highest proportion in Korea, were conducted. Each interview lasted for about an hour and a half on average, and there were additional questionnaires and observations on vocational courses. Collected data was analyzed in 4 steps by utilizing the analysis methods suggested by Lichtman (the three C's of data analysis: codes, categories, concepts), which were transformed to fit the final data. The research findings are as follows. First, the fundamental reasons that Chinese migrant women seek employment in Korea are as follows: role model as a mother based on motherhood and the desire to be recognized as a member of society. Second, as for employment strategies, although all the respondents were only dependent on the referral of their acquaintances and national institutions, Han Chinese and Korean Chinese women had ambivalent attitudes toward each other. Third, they attributed the causes of unemployment to personal aspects such as the amount of effort made and luck, and social structural aspects, including employment instability and low acceptance of multi- cultural individuals. Fourth, the migrant women hoping for 'complete integration' in the future, suggested some practical employment support measures. Such measures should be established by comprehensively reflecting their reasons for getting a job, employment strategies, attributions of unemployment, and employment outlook, rather than as response measures to the low birth rate and aging issues in Korea.

16kbps Windeband Sideband Speech Codec (16kbps 광대역 음성 압축기 개발)

  • 박호종;송재종
    • The Journal of the Acoustical Society of Korea
    • /
    • v.21 no.1
    • /
    • pp.5-10
    • /
    • 2002
  • This paper proposes new 16 kbps wideband speech codec with bandwidth of 7 kHz. The proposed codec decomposes the input speech signal into low-band and high-band signals using QMF (Quadrature Mirror Filter), then AMR (Adaptive Multi Rate) speech codec processes the low-band signal and new transform-domain codec based on G.722.1 wideband cosec compresses the high-band signal. The proposed codec allocates different number of bits to each band in an adaptive way according to the property of input signal, which provides better performance than the codec with the fixed bit allocation scheme. In addition, the proposed cosec processes high-band signal using wavelet transform for better performance. The performance of proposed codec is measured in a subjective method. and the simulations with various speech data show that the proposed coders has better performance than G.722 48 kbps SB-ADPCM.

The Expression of Fantastic Body in Fashion Illustration (패션 일러스트레이션에 나타난 판타스틱 신체의 표현 분석)

  • Choi, Jung-Hwa
    • Fashion & Textile Research Journal
    • /
    • v.11 no.6
    • /
    • pp.867-877
    • /
    • 2009
  • These days, the fantastic in opposition to classic beauty becomes a genre of creative body expression. The purpose of this study was to analyze the expressive characteristics of body types and meanings in recent fantastic fashion illustration. The method of this study was to analyze recent documentaries, fashion books, internet web site and so forth. The results were as follows: In literatures, pictures and movies, the category of the fantastic body's expressive types were classified as dominant mutant based on SF, multi body or fragment body by disruption, heterogeneous compound based on myth, personified humanoid and non substance in supernatural boundary. The dominant mutant based on SF was expressed image morphing, composition of machine image with body and modern metamorphosis of classic SF body. It means propensity to post-feminism and reservation of meaning analysis based on human unconsciousness. The multi body or fragment body by disruption in fashion illustration was expressed distorted composition of same body pictures, replacement of different bodies, deconstruction and partial omission of body and composition of meaning or non meaning images. It means permanence of self and basic narcissism. The heterogeneous compound based on myth was expressed general composition or optical illusion of various and aggressive animal motive. It means reinterpretation of original myth, metaphor of basic femme fatale, pursuit of permanence and sign of primitive mind in unconsciousness. The personified humanoid was expressed real human body description of mannequin or ball joint doll and anthropomorphism of robot image. It means representative satisfaction and nostalgia of childhood. The non substance in supernatural boundary was expressed grotesque description of ghost, zombie, vampire, angel, fairy, using of symbolic red, black color and non body. It means human's basic desire about immortality and taboo. Through the result of these study, the expression of fantastic body in fashion illustration will expend expressive method and we will understand human and cultural codes of today.

Design and Implementation of Progress Management System Using Swing Component Based on Internet (Swing 컴포넌트를 이용한 인터넷 기반 공정관리시스템 설계와 구현)

  • Kim, Tai-Suk;Kim, Jong-Soo
    • Journal of Korea Multimedia Society
    • /
    • v.13 no.8
    • /
    • pp.1163-1170
    • /
    • 2010
  • In this paper, in order to develop a remote progress management system through the Internet, we show a design method to make easy maintenance by developing the system with both the JAVA language and GoF Design Patterns. For the system implementation, we added the RS232C and RS422/RS485 communication modules to PLC(Programmable Logic Controller) in the control box which provide the real time status data of machines. Also we set up the RS232C to Ethernet converter based on wireless environment to communicate the PLC control data. We use JAVA Swing components to implement the multi-tier architecture system supported the GUI of the Applet and Frame at the same time so that the manager grasps the progress of work easily at the remote machines through the Internet. The key objective of the multi-tier architecture is to share resources among clients, this proposed system can help to develop the software to control the remote machine, and also it has the advantage that developer who wants to make a similar software can make easy to add new function reusing the existing codes.

Cell to Cell Interference Cancellation Algorithms in Multi level cell Flash memeory (MLC 플래시 메모리에서의 셀간 간섭 제거 알고리즘)

  • Jeon, Myeong-Woon;Kim, Kyung-Chul;Shin, Beom-Ju;Lee, Jung-Woo
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.47 no.12
    • /
    • pp.8-16
    • /
    • 2010
  • NAND multilevel cell (MLC) flash memory is widely issued because it can increase the capability of storage by storing two or more bits to a single cell. However if a number of levels in a cell increases, some physical features like cell to cell interference result cell voltage shift and it is known that a VT shift is unidirectional. To reduce errors by the effects, we can consider error correcting codes(ECC) or signal processing methods. We focus signal processing methods for the cell to cell interference voltage shift effects and propose the algorithms which reduce the effects of the voltage shift by estimating it and making level read voltages be adaptive. These new algorithms can be applied with ECC at the same time, therefore these algorithms are efficient for MLC error correcting ability. We show the bit error rate simulation results of the algorithms and compare the performance of the algorithms.

Space grid analysis method in modelling shear lag of cable-stayed bridge with corrugated steel webs

  • Ma, Ye;Ni, Ying-Sheng;Xu, Dong;Li, Jin-Kai
    • Steel and Composite Structures
    • /
    • v.24 no.5
    • /
    • pp.549-559
    • /
    • 2017
  • As few multi-tower single-box multi-cell cable-stayed bridges with corrugated steel webs have been built, analysis is mostly achieved by combining single-girder model, beam grillage model and solid model in support of the design. However, such analysis methods usually suffer from major limitations in terms of the engineering applications: single-girder model fails to account for spatial effect such as shear lag effect of the box girder and the relevant effective girder width and eccentric load coefficient; owing to the approximation in the principle equivalence, the plane grillage model cannot accurately capture shear stress distribution and local stress state in both top and bottom flange of composite box girder; and solid model is difficult to be practically combined with the overall calculation. The usual effective width method fails to provide a uniform and accurate "effective length" (and the codes fail to provide a unified design approach at those circumstance) considering different shear lag effects resulting from dead load, prestress and cable tension in the construction. Therefore, a novel spatial grid model has been developed to account for shear lag effect. The theoretical principle of the proposed spatial grid model has been elaborated along with the relevant illustrations of modeling parameters of composite box girder with corrugated steel webs. Then typical transverse and longitudinal shear lag coefficient distribution pattern at the side-span and mid-span key cross sections have been analyzed and summarized to provide reference for similar bridges. The effectiveness and accuracy of spatial grid analysis methods has been finally validated through a practical cable-stayed bridge.

Design and Implementation of Conversion System Between ISO/IEC 10646 and Multi-Byte Code Set (ISO/IEC 10646과 멀티바이트 코드 세트간의 변환시스템의 설계 및 구현)

  • Kim, Chul
    • The Journal of Korea Institute of Information, Electronics, and Communication Technology
    • /
    • v.11 no.4
    • /
    • pp.319-324
    • /
    • 2018
  • In this paper, we designed and implemented a code conversion method between ISO/IEC 10646 and the multi-byte code set. The Universal Multiple-Octet Coded Character Set(UCS) provides codes for more than 65,000 characters, huge increase over ASCII's code capacity of 128 characters. It is applicable to the representation, transmission, interchange, processing, storage, input and presentation of the written form of the language throughout the world. Therefore, it is so important to guide on code conversion methods to their customers during customer systems are migrated to the environment which the UCS code system is used and/or the current code systems, i.e., ASCII PC code and EBCDIC host code, are used with the UCS together. Code conversion utility including the mapping table between the UCS and IBM new host code is shown for the purpose of the explanation of code conversion algorithm and its implementation in the system. The programs are successfully executed in the real system environments and so can be delivered to the customer during its migration stage from the UCS to the current IBM code system and vice versa.

Human Acellular Dermis versus Submuscular Tissue Expander Breast Reconstruction: A Multivariate Analysis of Short-Term Complications

  • Davila, Armando A.;Seth, Akhil K.;Wang, Edward;Hanwright, Philip;Bilimoria, Karl;Fine, Neil;Kim, John Y.S.
    • Archives of Plastic Surgery
    • /
    • v.40 no.1
    • /
    • pp.19-27
    • /
    • 2013
  • Background Acellular dermal matrix (ADM) allografts and their putative benefits have been increasingly described in prosthesis based breast reconstruction. There have been a myriad of analyses outlining ADM complication profiles, but few large-scale, multi-institutional studies exploring these outcomes. In this study, complication rates of acellular dermis-assisted tissue expander breast reconstruction were compared with traditional submuscular methods by evaluation of the American College of Surgeon's National Surgical Quality Improvement Program (NSQIP) registry. Methods Patients who underwent immediate tissue expander breast reconstruction from 2006-2010 were identified using surgical procedure codes. Two hundred forty tracked variables from over 250 participating sites were extracted for patients undergoing acellular dermis-assisted versus submuscular tissue expander reconstruction. Thirty-day postoperative outcomes and captured risk factors for complications were compared between the two groups. Results A total of 9,159 patients underwent tissue expander breast reconstruction; 1,717 using acellular dermis and 7,442 with submuscular expander placement. Total complications and reconstruction related complications were similar in both cohorts (5.5% vs. 5.3%, P=0.68 and 4.7% vs. 4.3%, P=0.39, respectively). Multivariate logistic regression revealed body mass index and smoking as independent risk factors for reconstructive complications in both cohorts (P<0.01). Conclusions The NSQIP database provides large-scale, multi-institutional, independent outcomes for acellular dermis and submuscular breast reconstruction. Both thirty-day complication profiles and risk factors for post operative morbidity are similar between these two reconstructive approaches.

Performance Analysis of CDMA Reservation ALOHA for Multi-traffic Services (다중 트랙픽 지원을 위한 CDMA 예약 ALOHA 방안의 성능 분석)

  • Jo, Chun Geun;Heo, Gyeong Mu;Lee, Yeon U;Cha, Gyun Hyeon
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.24 no.12A
    • /
    • pp.1852-1861
    • /
    • 1999
  • In this paper, CDMA Reservation ALOHA scheme which can reduce multiple access interference and packet collision is proposed to support multi-traffic such as voice and random data with and without priority. In this scheme, the time slot is divided into two stage, access and transmission stage. Only packets with spreading codes assigned from base station in access stage can transmit their packets in transmission stage, so MAI can be reduced. To reduce packer collision in access stage, the code reservation and access permission probability are used. Code reservation is allowed for voice traffic and continuous traffic with priority using piggyback and access permission probability based on the estimation of the number of contending users in the steady-state is adaptively applied to each traffic terminal. Also, we analyzed and simulated the numerical performances required for each traffic using Markov chain modeling in a single cell environment.

  • PDF

Multi-core-based Parallel Query of 3D Point Cloud Indexed in Octree (옥트리로 색인한 3차원 포인트 클라우드의 다중코어 기반 병렬 탐색)

  • Han, Soohee
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.31 no.4
    • /
    • pp.301-310
    • /
    • 2013
  • The aim of the present study is to enhance query speed of large 3D point cloud indexed in octree by parallel query using multi-cores. Especially, it is focused on developing methods of accessing multiple leaf nodes in octree concurrently to query points residing within a radius from a given coordinates. To the end, two parallel query methods are suggested using different strategies to distribute query overheads to each core: one using automatic division of 'for routines' in codes controlled by OpenMP and the other considering spatial division. Approximately 18 million 3D points gathered by a terrestrial laser scanner are indexed in octree and tested in a system with a 8-core CPU to evaluate the performances of a non-parallel and the two parallel methods. In results, the performances of the two parallel methods exceeded non-parallel one by several times and the two parallel rivals showed competing aspects confronting various query radii. Parallel query is expected to be accelerated by anticipated improvements of distribution strategies of query overhead to each core.