• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.565-568
• /
• 2002

In the flow analysis around a bluffbody such as road vehicles, drag reduction has been of the primary concern mainly due to the effect on fuel economy. To reduce the drag, which is mostly due to the pressure difference caused by the flow separation, the location of the separation and eddy sizes are controlled. However, less attention has been given to the effect of the lift. The effect of lift may cause the driving stability problem of the vehicle at high speed white heavy downward effect of lift together with the vehicle weight may require more power to drive the vehicle forward. It is considered worthwhile to pursue the optimal design of the low drag tail shape of the MIRA model while taking the lift effect into account, even though it is considered as a reference. To this end, a commercial multi-objective optimization code, FRONTIER, Is used together with the CFD code, STAR-CD. It is hoped that the results will provide more insight into the flow field around the bluffbody as transportation means.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.8
• /
• pp.697-703
• /
• 2013

We propose an efficient frequency-time domain resource allocation scheme in multi-carrier (MC) direct-sequence code-division multiple-access (DS/CDMA) communications. We consider, as a power allocation strategy in the frequency domain, transmitting each user's DS waveforms over the user's sub-band with the largest channel gain. We then consider rate adaptation in the time domain, where the data rate is adapted such that a desired transmission quality is maintained. We analyze the achievable average data rate of the proposed scheme with fixed average transmission power, and compare the performance to single carrier DS/CDMA systems with power and rate adaptations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.10
• /
• pp.1977-1985
• /
• 2007

The character recognition technique is one of the artificial intelligence and has been widely applied in the automated system robot HCI(Human Computer Interaction), etc. This paper introduces the character set and the representative character that can be used in the recognition of the mage ROI. The character codes in this ROI include the digit, symbol, English and Hereat etc. We proposed the efficient multi-classifier structure by combining the small-size classifiers hierarchically. Moreover, we generated each small-size classifiers by delta-bar-delta learning algorithm. We tested the performance with various kinds of images and achieved the accuracy of 99%. The proposed multi-classifier showed the efficiency and the reliability for the mixed character code set.

• Nuclear Engineering and Technology
• /
• v.54 no.7
• /
• pp.2625-2634
• /
• 2022

Discretization errors are extremely challenging conundrums of discrete ordinates calculations for radiation transport problems with void regions. In previous work, we have presented a multi-collision source method (MCS) to overcome discretization errors, but the efficiency needs to be improved. This paper proposes a goal-oriented algorithm for the MCS method to adaptively determine the partitioning of the geometry and dynamically change the angular quadrature in remaining iterations. The importance factor based on the adjoint transport calculation obtains the response function to get a problem-dependent, goal-oriented spatial decomposition. The difference in the scalar fluxes from one high-order quadrature set to a lower one provides the error estimation as a driving force behind the dynamic quadrature. The goal-oriented algorithm allows optimizing by using ray-tracing technology or high-order quadrature sets in the first few iterations and arranging the integration order of the remaining iterations from high to low. The algorithm has been implemented in the 3D transport code ARES and was tested on the Kobayashi benchmarks. The numerical results show a reduction in computation time on these problems for the same desired level of accuracy as compared to the standard ARES code, and it has clear advantages over the traditional MCS method in solving radiation transport problems with reflective boundary conditions.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.4
• /
• pp.17-25
• /
• 2013

In this paper, a coding algorithm is proposed for multi-user multi-input multi-output (MU-MIMO) systems to improve the reception performance in fading conditions without reducing the bandwidth efficiency. The space division multiple access (SDMA) scheme that is one of the commonly used for MU-MIMO systems is vulnerable to the fading. The space time block code (STBC) scheme that is used to overcome the fading has a disadvantage of reduced throughput. The proposed MU-MIMO system first encodes transmitted symbols by linear dispersion code (LDC) which is less vulnerable to the fading and increases the throughput in proportional to the number of transmit antennas. Then, the LDC coded symbols are pre-coded by the result of singular value decomposition (SVD) of the estimated channel gain. We evaluate the performance of the proposed scheme compared with the conventional algorithms by computer simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1349-1355
• /
• 2016

It should guarantee high reliability and ultra low latency communication. Additionally, it should support connection between massive devices. As one of estimated scenarios for 5G mobile communication, mobile devices and sensors using low data rate wireless communication will increase. For communication of these devices, single-carrier system can be considered. In order to satisfy these requirements, in this paper, we propose CDMA (Code Division Multiple Access) system using complex spreading and Multi-level BPSK(Binary Phase Shift Keying). The proposed system spread transmit symbol by using chip code consisted of real and imaginary number. As simulation results, we can confirm that although the proposed system has 3dB lower BER (Bit Error Rate) performance than conventional CDMA system, the proposed system can support 2 times more users in comparison with conventional CDMA system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11A
• /
• pp.1087-1094
• /
• 2008

In this paper, we propose the acquisition method of the Cyclic-Prefix CDMA using Good-Autocorrelation-Sequence (GAS-CP-CDMA) system. The sequences for GAS-CP-CDMA are m-sequence and constant amplitude zero autocorrelation code (CAZAC) with good autocorrelation property. The GAS-CP-CDMA system is proposed for interference cancellation in multi-user and -path environment in co-cell. However, the reliable initial acquisition in multi-path fading channel and multi-user system environment is crucial. In this paper, non-coherent power detector and threshold value are used for discriminating signal acquisition. The sequence used for computer simulation is CAZAC. The simulation results show proper threshold value depends on the number of users. Through the computer simulation, we draw setting up method of the optimum threshold value for the GAS-CP-CDMA system.

• Journal of Advanced Navigation Technology
• /
• v.14 no.2
• /
• pp.213-219
• /
• 2010

Recently, a multi-core system is studied for single terminal's operations on various service networks for mobile systems. Therefore, it is expected that mobile systems capable of supporting WCDMA, MC-CDMA, CDMA and WiBro would be developed. Mobile systems for supporting various service networks is able to be implemented on a single chipset via SoC(System one Chip) technology, thus a noble modem design proper for SoC technology is necessary. For high speed data transmission of 4G mobile communication services, OFDM scheme has to be applied. But, an OFDM signal consists of a number of independently modulated subcarriers, and superposition of these subcarriers cause a problem that can give a large PAPR. In this paper, a noble modem design for 4G mobile communication services and PAPR reduction method for solving the PAPR problem are proposed.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1998.04a
• /
• pp.89-97
• /
• 1998

This study is intended to investigate the seismic responses of bridge structures considering site effects. The site effects in the seismic analysis of bridge structures were classified into two parts. At first, the seismic responses of the structures on each "soil profile types" of the code were evaluated in accordance with code-specified method and compared with results of time-history analysis method. And next, as a second stage of the study, the responses of the two different soil with considerably different soil properties, even though they are classified to the same "soil profile types" of the code, were evaluated and compared each other. The first part of study is purposed to evaluate the applicability of code-specified method, while the other part is purposed to find the variance of the seismic responses from the different soil sites in the same soil profile types of the code. For the analysis, two major methods of the code, single-mode spectral anaysis and multi-mode spectral analysis, were used and the time-history analysis method which is expected to give more accurate responses was also used for the comparison purposes. For the time-history analysis, time-domain analysis technique of the lumped-mass model with frequency-independent soil springs and dampers was adopted and artificially generated spectra of the code was used as input motion. As the results of the study, the code specified methods for the seismic responses considering the site effects were verified to give the results in conservative side for the most of the cases. However, for the structures on the site with considerable flexibility, the responses of the bridge girders or deckplates by the code methods both in section forces and horizontal movement responses, may have much smaller values than the actual responses. Therefore, more detailed analysis considering the flexibility of the base soil may be required to have more reasonable results in girder responses.in girder responses.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12C
• /
• pp.1075-1081
• /
• 2008

In this paper, we propose a code acquisition algorithm using optical orthogonal code (OOC) for optical code division multiple access (CDMA) systems. Generally, a good code acquisition algorithm offers short mean acquisition time (MAT). The conventional multiple-shift (MS) algorithm consists of two stages and has shorter MAT than that of well-known serial-search (SS) algorithm. This paper proposes a novel code acquisition algorithm called enhanced multiple-shift (EMS) algorithm. By using multiple thresholds, the proposed EMS algorithm provides shorter MAT compared with that of the MS algorithm. The simulation results show that the EMS algorithm presents shorter MAT compared with the MS algorithm in both single-user and multi-user environments.